Pioneer SPH-C10BT USB Receiver, 4x 6.5" Coaxial Speakers, 4CH Amp, Wiring Kit
The SPH-C10BT is Pioneer’s flagship smartphone receiver and is designed to let you use features of your smartphone in a safe, direct and convenient way that you have never seen before.
Just place your smartphone in the integrated cradle, and it will transform into an extension of your head unit. Using direct access keys, you can use your favorite apps without touching your smartphone, helping to ensure a smooth and safe ride wherever you go. Add to this, when connected with the new Pioneer Smart Sync app, various colour and sound adjustments offer a superior customised in car experience. Utilising the Pioneer Smart Sync app, you can connect to a wide variety of commonly used applications, including various music and mapping apps such as Spotify and Google Maps. It lets you easily access all the compatible apps you use on a daily basis without distracting you from the road. Expect only the best audio environment when you’re driving in your car, you’ll get it with SPH-C10BT & Pioneer Smart Sync. Packed with advanced technologies that Pioneer has developed over the years, we can now offer you a greater variety of sound effects and audio adjustments, to upgrade the sound experience in your car.
General:
- FLAC Playback
- MP3 / WMA/WAV Playback
- Bluetooth
- Built-in Amplifier: MOSFET 50Wx4
- D/A Converter24-bit
- Time AlignmentManual
- Equalizer13-Band GEQ 31-Band GEQ (with PSS App)
- Crossover NetworkHPF / LPF
- Advanced Sound Retreiver
- Advanced Sound Retreiver for BT Audio
- Subwoofer control
- Dynamic Bass Enhancer
- Display with LED Back light: 8-Digit VA LCD ( 1-Line )
- Color Customization: 3-Zone Color Illumination
- Android/iPhone Control
- SD Card Slot
- USB Interface
- USB Quick Charge for Android
- Pioneer Smart Sync
- 31-Band EQ
- Parking Assistance
- Voice Recognition
- Integrated Smartphone Cradle
UPC Code 884938405799
The JVC CS-J620 feature a Mica Cone and Hybrid Surround, built onto a steel stamped frame, to bring you an affordable set of speakers intended to meet or exceed the performance of traditional OEM 6-1/2" speaker. The 30 watts RMS power handling of each speaker allows for user to add a modest amplifier - unlike an OEM speaker - to really bring out the life of his or her audio system and properly reach the full performance of the CS-J620.
General Features:
- Pair of CSJ620 6.5" 2-Way Coaxial Speakers
- 300 Watts Peak Power/30 Watts RMS
- Frequency Response: 35-22,000 Hz
- Mica woofer cone
- Ferrite magnet
- Hybrid rubberized cloth surround
- Polyetherimide balanced tweeter
- Neodymium magnet (tweeter)
- Black ABS composite grills
- Top-Mount Depth: 1-23/32"
- Note: Not Marine Grade or Waterproof
UPC Code 613815616498
This JVC KS-DR1004D marine 4-Channel amplifier has a maximum power output of 400 watts and flaunts Class D amplification technology, providing you with a powerful interface for your vehicle's audio system. A conformal coating is a protective chemical coating to safeguard electronic circuits from harsh environments that may contain moisture or chemical contaminants. It provides a barrier to airborne contaminants from the operating environment, such as salt-spray, thus preventing corrosion. Separated circuit boards of the Pre-amp and Power-amp sections contribute to a reduction in radiation noise.
General Features:
- 4-Channel Marine Amplifier
- Conformal Coated Circuitry
- Circuit Separation Construction
- Large LPF Coil
- Variable High/Low-Pass Filter
- 400W Maximum Power Output
- RMS Power Output (4 ohm) [ 1% THD 14.4V]: 45W x 4 (20 - 20,000Hz)
- RMS Power Output (2 ohm) [ 1% THD 14.4V]: 45W x 4 (1,000Hz)
- RMS Power Output (Bridged 4 ohm) [ 1% THD 14.4V]: 90W x 2 (1,000Hz)
- Class D
- Signal-to-Noise Ratio (reference: 1W into 4 ohms): >82dB
- CEA-2006 Compliant
- Load Impedance Allowance: 2 - 8 Ohms
- HPF: 50Hz - 200Hz (-12dB/oct)
- LPF: 50Hz - 200Hz (-12dB/oct)
- RCA Input: Ach L/R, Bch L/R
- High Level Input (Speaker Level Input): Yes
- High Level Input Auto Power Control (Signal Sensing Turn On): Yes
- Input Sensitivity: .2 - 5V
- Dimensions (W x H x D): 5-11/16" x 1-3/4" x 3-7/8"
UPC Code 046838079245
Renegade REN10KIT 10mm^2 Car Audio Complete Amplifier Installation Wiring Kit
General Features:
- 1 x 10 mm^2 Power Wire (red), flexible Strands (0,15 mm), 5 m
- 1 x 10 mm^2 Ground Wire (grey), flexible Strands (0,15 mm), 0.8 m
- 1 x RCA Stereo Audio Cable (blue), double shielded, 5 m
- 1 x 0.5 mm^2 Remote Wire, 5 m
- 1 x AGU Fuse Holder with 40 A ANL Fuse
- Installation Kit
Installation Instructions:
- Disconnect at first the negative ground connection from the vehicle’s battery.
- Connect the GROUND CABLE (brown, 0.8m) with the ground terminal of the amplifier and a suitable GROUND contact point on the car chassis, with a maximum distance of 1 meter from the amplifier. Use the ringterminal for the GROUND contact point. Ensure that all paint or other insulation is removed from around the hole area.
- Find a suitable position for the FUSE HOLDER next to the car battery’s PLUS POLE. The maximum distance should not be more than 30 cm. Please ensure, that you don’t damage any parts of the car, like the fuel tank, wires etc.
- Cut off a part of the POWER CABLE (red, 5m) on one end, which has the same length like the distance from the battery’s PLUS POLE to the FUSE HOLDER (max. 30cm). Connect this part on the end without ringterminal with the FUSE HOLDER (without inserted fuse) and the other end to the battery’s PLUS POLE. Use for the connection the supplied ring terminals.
- Lead one end of the POWER CABLE (red) from the car battery area through the car to the +12V terminal of the amplifier and connect it. Then connect the other end of the cable with the FUSE HOLDER at the suitable terminal.
- Lead the RCA/CINCH CABLE pair with attached REMOTE WIRE from the HEAD UNIT through the car to the amplifier’s position. Then connect the RCA/CINCH plugs on one end with amplifier, and the other end with the HEAD UNIT RCA/CINCH outputs. Please observe the correct polarity of all connections.
- Connect the one end of the attached REMOTE WIRE with the REMOTE/REM terminal of the HEAD UNIT and the other end with the REMOTE/REM terminal of the amplifier. This wire provides a turn on/turn off signal to the amplifier, when the HEAD UNIT is turned on / turned off. NOTE: some amplifier types may require, that you have to extend the REMOTE WIRE with a suitable cable, to lead the REMOTE WIRE to the other endpanel of the amplifier.
- At least insert the FUSE into the FUSE HOLDER. Ensure not to cause a short circuit, or your car’s electric system may get damaged. Do not touch the bare metal parts of the cable or the car battery, otherwise a risk of electric shock consists. Then re-connect the negative ground connection to the vehicle’s battery.
UPC Code 854932002478