Pyle PT260A Stereo Receiver, 4x 3.5'' 200W Indoor/Outdoor Speakers, Mic System
This 200-watt amp brings music to the living room with crystal clear clarity. With plenty of inputs, you won't find this amplifier lacking. It plays AM/FM thanks to the built in tuner - store up to 50 presets It's equipped with three RCA inputs on the back and two ¼' mic jacks on the front, so you can turn this amp into a karaoke machine - even add an echo effect. Easily adjust the volume, balance, treble, bass on the master output for total control of your sound. AM/FM antenna included. Runs on 110 and 220 V AC.
General Features:
- Stereo Amplifier
- Power Main: 50W x 2 @ 8 Ohm, 100W x 2 @ 4 Ohm
- Audio Inputs with A/B Speaker Outputs
- AM/FM Radio with Digital Display Screen
- Auto Scan,Memory, Radio Station PREVIOUS/NEXT control
- 50 Radio Station Pre-Set Memory
- Main Channel Volume, Balance, Treble, Bass & Gain Controls
- Microphone Volume, Bass, Treble & Echo Controls
- Two Microphone Input JackS
- Three RCA Input Source
- 110/220V Power Switch
- AM/FM Antenna and Remote Control Included
- Dimension:17'' x 11.5'' x 4.7''
- Weight:14.3 LBS
- Sold as: Unit
- Weight: 13.33 lbs.
UPC Code 068888899987
The Pyle PLMR24B 3.5" marine 3-way speakers are completely waterproof with a removeable rustproof grill featuring built in capacitor crossover network, 200 watts max power handling, Bass reflex vent for added bass response.
These 3-way speakers provide the full spectrum of sound, thanks a 3.5" aluminum injection cone woofer with a 24 oz. magnet for the low end, a 1.75" wide dispersion cone for the midrange, and a 1" super dome tweeter for the highs. The built in capacitor crossover network does all the hard work - you just plug them in using the quick connect terminals and hit ‘play'. Bass reflex vent provides even more low end for your buck.
General Features:
- Excellent for Use On Boats/Marine/Decks/Poolside/Outdoors
- Completely Water Proof
- 3.5'' Aluminum Injection Cone Woofer
- 24 Oz. Magnet Structure
- 1.75'' Wide Dispersion Cone Midrange
- 1'' Super Dome Tweeter
- Capacitor Crossover Network
- Bass Reflex Vent for Added Bass Response
- Heavy Duty ASB Construction
- Quick Connect / Disconnect Speaker Terminals
- Removable Rustproof of Mesh Grills
- Power: 100 Watts RMS / 200 Watts Peak
- Frequency Response: 70-21 Khz
- Impedance: 4 Ohms
- Complete Mounting Kit Wires
- Dimensions: 5.25''W x 3.75''H x 3.75''D
UPC Code 068889014808
The Pyle PDWM2145 delivers clear, noise-free wireless transmission and excellent sound reproduction. Simple setup and installation allow you to transmit clear sound instantly. System features include two body-pack transmitter with two headset & two lavalier microphones, VHF narrow band system, dual frequency design, high signal to noise ratio performance and more. Enjoy dual channel voice distribution across the transmitters. Whether used for work or play, for on-stage vocal performances or conference room speeches, this wireless microphone system will provide you with a quality audio experience. Enjoy hassle-free and reliable wireless sound transmission with today's latest system technology with this all-in-one package.
- VHF Narrow Band Receiver System
- Dual Frequency Design (Channel A/B)
- High Signal/Noise Ratio Performance
- Broad Frequency Response Range & Low Distortion
- Independent Adjustable Volume Control
- Dual Independent Channel Antennas
- RF Signal and AF Signal LED Indicators
- Radio Frequency and Audio Frequency
- Includes (2) Body-Pack Transmitter, (2) Lavalier & (2) Headset Mics
- System Receiver:
- Channel Frequency: 174~216MHz
- Sensitivity: -95dBm (S/N:12dB)
- RF Image Rejection:-75dB
- Audio Dynamic Range: 95dB
- T.H.D.: <1%
- Frequency Stability: ±0.002%
- S/N Ratio: >70dB
- Neighboring Channel / Interference: >70dB
- Frequency Response: 50Hz~15KHz ±3dB
- Power: AC 120V, 60Hz
- Receiver Dimensions (L x W x H): 8.07'' x 5.75'' x 1.64''
- Transmitters:
- Carrier Frequency:174~216MHz
- RF Power Output: >13dBm
- Modulation Degree: >30KHz
- Power Current: <110mA
- Frequency Stability: ±0.002%
- Harmonic at Higher Degree: <60dB
- Modulation Pattern: FM
- Battery Powered: Requires 2 x 'AA' Batteries
- Sold as: Unit
- Weight: 2.1 lbs.
UPC Code 068888758321
EnrockAudio 16-Gauge Speaker Wire
This 16-gauge speaker wire with spool from EnrockBasics lets you easily connect your speakers to amplifiers or receivers.
Marked Polarity
One side of the wire is marked with a white line, making it quick and easy to distinguish the polarity and get your audio system set up properly.
Easy to Use
The EnrockAudio 16-gauge Speaker Wire comes wrapped around a hard plastic spool that makes dispensing convenient and easy.
Details
Connects audio speakers to your A/V receiver or amplifier no distortion. The plastic jacket around the speaker wire helps to deliver high-quality undistorted signals to and from all of your audio equipment.
General Features:
- 50 Feet of 16-gauge speaker wire.
- Connects audio speakers to your A/V receiver or amplifier.
UPC Code 799861390381
