Infinity Marine Gauge Hole Radio, 4x 6.5" Speakers, 10" Subwoofer, Amplifier
Infinity PRV-315.2 Marine Gauge Hole Mount USB Bluetooth AM/FM/WB Radio Receiver
Infinity PRV315.2 gauge style marine receiver has a waterproof face resistant to rain and splashing with a 3.5" Color-TFT screen display featuring an AM/FM radio tuner with 18 station presets, bluetooth audio streaming, a USB port for charging and playing MP3 audio, video input, 3 pairs of pre-outs including separate subwoofer output and Weatherband radio tuner.
General Features:
- AM/FM Bluetooth Audio Streaming
- 4 x 50 Watts
- Aux Input
- 3 1/2" cutout; 4 1/8" O.D.
- USB Input for USB Drives
- 3 Pair of RCA Pre-outs
- Charging Through USB
- Wired/Wireless Remote-Ready
- 6-Channel Preamp Outputs
- Marine-Grade Watertight Face
UPC Code 050667372873
Infinity KAPPA 6120M 6.5" Premiun 2-Way Coaxial 300 Watt Peak Power White Marine Speakers with RGB Lighting (Pair) (x2)
These Infinity KAPPA 6.5" 2-Way 300W Marine Speakers features multi-color LED lighting, Plus One polypropylene woofer and midrange cones, Mylar tweeter domes, SSI (Switch Selectable Impedance) 2 or 4 Ohm option, one piece cast polymer baskets, sealed magnets, and rubber woofer surrounds for high SPL performance. UV resistant marine grade IPX3(IPX5 from front) weather resistant. (White)
General Features:
- Power Handling: 100 watts RMS, 300 watts peak power
- Sensitivity: 92dB at 2.83 volts
- Frequency Response: 40 - 25kHz
- Voice Coil Diameter: 1 in. (25.5mm)
- Impedance: 3 ohm impedance
- Plus One Woofer Cones
- Perimeter RGB Illumination
- One Piece Polymer Basket
- Mylar Tweeters
- Harman Standard Reliability Testing
DO NOT USE DRILLS ON THE SCREW SPEAKER TERMINALS EVER.
Loosen and Tighten BY HAND ONLY. Using a Drill snaps the solder connection on the back of the terminal and the X-over (coax) Circuit board.
UPC Code 050667373061
Infinity KAPPA 1010M 10" 900 Watt Peak Power Marine Multicolor RGB LED White Subwoofer
Infinity KAPPA 1010M 10" Marine subwoofer feature Plus One polypropylene woofer and midrange cones, Mylar tweeter domes (Except Subwoofer), one piece cast polymer baskets, sealed magnets, and rubber woofer surrounds for high SPL performance. Wind, water or engine noise will not drown them out, UV resistant in a marine grade IPX3 (IPX5 from front) weather resistant and include RGB LED illumination.
General Features:
- 10" 3-Way Subwoofer
- Power Handling: 300 watts RMS
- Power Handling: 900 watts Max
- Sensitivity: 89dB
- Frequency Response: 20-22KHz
- Impedance 2 and 4-ohms, Switch Selectable Impedance (SSI)
- 7 color RGB LED Lights - expandable with remote
- Marine Grade IPX3 and IPX5 rated
- UV resistant
- Plus One polypropylene woofer
UPC Code 050667373108
Infinity Marine 7005A 5 Channel Class AB+D Bass Boost Boat Audio Amplifier w/Remote Bass Control
The Infinity Marine 7005A 5-channel amplifier delivers 50-Watts RMS to each of the front and rear speakers. The subwoofer channel features a hi-pass and low-pass crossover, selectable bass boost, and phase switch to optimize subwoofer performance. Includes a wired Remote Bass Control for volume adjustment (16.5 feet long).
General Features:
- 5 Channel Marine Amplifier
- 50 watts RMS x 4 + 320 watts RMS x 1 at 4 ohms
- 75 watts RMS x 4 + 500 watts RMS x 1 at 2 ohms
- 100 watts RMS x 2 bridged at 4 ohms + 500 watts RMS x 1 at 2 ohms
- Class AB+D amp technology
- Bass boost and low pass filter on subwoofer channel
- RBC wired remote - volume adjustment
- Variable high and low-pass filters on front and rear channels
- Preamp and speaker-level inputs
- Preamp outputs
- Fuse rating: 30A x 2
- 4-gauge power and ground leads recommended
- Wiring and hardware not included
UPC Code 050667380113
Metra ST-AK8 8GA Power Sport Motorcycle Amplifier Wiring Kit
The Power Sport Motorcycle Universal Amplifier Wiring Kit includes the following 6 foot length of red and black T-Spec OFC power and ground wire with a T-Spec V8MANL fuse holder, 60 amp fuse protected by a black nylon braid, Pre-terminated ring terminals, (2) 4 foot pieces of 16 gauge OFC speaker wire protected by black nylon mesh and 4"x6" hook and loop mounting pad for micro-amplifiers.
Amplifier Wiring Kit:
- Designed tor motorcycles
- 6 feet of red and black T-Spec OFC power and ground wire with a T-Spec V8MANL fuse holder and 60 amp fuse protected by a black nylon braid
- Pre-terminated ring terminals make connections to the battery simple
- Two 4 foot pieces of 16 gauge OFC speaker wire protected by black nylon mesh makes upgrading the factory speaker wires or adding new speakers a smart choice
- Upgrading Harmon Kardon System – Two 47-ohm .5 watt resistors to keep the factory radio outputs active
- All the necessary installation hardware is included along wtth a 4 × 6 inch hook and loop mounting pad for micro-amplifiers to hold the amplifier securely in place
UPC Code 086429332267
1 Year Manufacturer Warranty
