JBL Marine AM/FM Radio, 8x 6.5" Speaker, 2x Amp w/Kit, Splitter, Antenna (White)
JBL PRV-175 Marine Gauge Hole Mount USB Bluetooth AM/FM Digital Stereo Receiver
JBL PRV175 Bluetooth USB Marine Gauge Style Stereo Receiver is made with a IPX5 marine rated faceplate to protect against any weather condition featuring built in Bluetooth for audio streaming, USB input and AUX inputs, AM/FM tuner and RCA or speaker level power outputs.
General Features
- Marine Gauge Style Digital Media Receiver
- AM/FM tuner
- Bluetooth Audio Streaming
- Built-In Amplifier (45 peak x 4 channels)
- Waterproof Faceplate
- USB input and control-for USB drives only
- Auxiliary input
- 2 pair of RCA output
- Wired remote option
UPC Code 648701217503
Infinity 6.5" 225-Watts High-Performance White Speaker (Single, Bulk Packaging) (x8)
Infinity's Marine speakers are constructed of solid, weather-resistant material, put together in the most careful, precise manner will provide you with a musical and listening experience that will keep you attached to your boat. The 6.5" speakers feature a polypropylene woofer cone bonded to a tough, UV-resistant rubber surround, which delivers full bass response and does a superb job deflecting sunlight and moisture. The corrosion-proof, cast-polymer basket resists deterioration from salt, moisture, and UV rays, while the stylish non-removable grille is specially meant for retaining its shiny chrome finish. The grille-mounted 1" tweeter offers excellent high-frequency projection. Infinity seals the front of the woofer cone along with the speaker's magnet structure, serving as extra protection against moisture. Stainless steel mounting hardware is not included.
6.5" Speaker:
- 6.5" 2-way Marine speakers
- Power range: 75 watts RMS / 225 Watts Peak
- Polypropylene woofer cone with UV-resistant rubber surround
- Grille-mounted 1" polypropylene semi-dome tweeter.
- Frequency Response: 50-20,000 Hz.
- Sensitivity: 92 dB
UPC Code 050667371890
Infinity Marine 3004A 4 Channel Class H Boat Audio Amplifier (x2)
Infinity's marine 3004A amplifier will add plenty of muscle to your music without breaking a sweat, and it'll look good doing it. This 4-channel powerhouse delivers 75 watts RMS to each of the front and rear speakers in your boat. Into planning ahead? You could use this amp in 2-channel mode now to drive a couple subwoofers with 200 watts RMS each, then reassign it to your front and rear speakers when you get a bigger sub amp. Speaker-level inputs allow this amplifier to work in almost any system, even if you're keeping your marine's factory radio. You can use the separate high and low pass filters on the front and rear channels to maximize the performance of your speakers or subs.
General Features:
- 4 Channel Marine Amplifier
- 75 watts RMS x 4 at 4 ohms
- 100 watts RMS x 4 at 2 ohms
- 200 watts RMS x 2 at 4 ohms in bridged mode (4-ohm stable in bridged mode)
- Class H amp technology
- Variable high and low-pass filters on front and rear channels
- Preamp and speaker-level inputs
- Preamp outputs
- Fuse rating: 30A x 2
- 8-gauge power and ground leads recommended
- Wiring and hardware not included
UPC Code 050667380106
Metra ST-AK8 8GA Power Sport Motorcycle Amplifier Wiring Kit (x2)
The Power Sport Motorcycle Universal Amplifier Wiring Kit includes the following 6 foot length of red and black T-Spec OFC power and ground wire with a T-Spec V8MANL fuse holder, 60 amp fuse protected by a black nylon braid, Pre-terminated ring terminals, (2) 4 foot pieces of 16 gauge OFC speaker wire protected by black nylon mesh and 4"x6" hook and loop mounting pad for micro-amplifiers.
Amplifier Wiring Kit:
- Designed tor motorcycles
- 6 feet of red and black T-Spec OFC power and ground wire with a T-Spec V8MANL fuse holder and 60 amp fuse protected by a black nylon braid
- Pre-terminated ring terminals make connections to the battery simple
- Two 4 foot pieces of 16 gauge OFC speaker wire protected by black nylon mesh makes upgrading the factory speaker wires or adding new speakers a smart choice
- Upgrading Harmon Kardon System – Two 47-ohm .5 watt resistors to keep the factory radio outputs active
- All the necessary installation hardware is included along wtth a 4 × 6 inch hook and loop mounting pad for micro-amplifiers to hold the amplifier securely in place
UPC Code 086429332267
Audiopipe Multi-Audio Signal Splitter Amplifier 3 Rca Outputs W/ Built in 10 Volt Line Driver
The Audiopipe signal splitter (SPLIT3003RCA) accepts 3 RCA inputs from a head unit: Front, Rear, and Subwoofer. Provides 3 amplified outputs for each input: 3 front outputs, 3 rear outputs, and 3 subwoofer outputs.
SPLIT-3003RCA AUDIO SIGNAL SPLITTER FEATURES:
- INPUT IMPEDANCE: 47K Ohms
- INPUT SENSITIVITY: 260mV
- S/N RATIO: >95dB -
- OUTPUT LEVEL (10KHz): >1V (1KHz)
- OUTPUT IMPEDANCE: 1K Ohms
- CHANNEL RESOLUTION: >60dB
- HARMONICS DISTORTION: 0.009%
- FREQUENCY RESPONCE: 20-20KHz -
- OUTPUT GAIN: 12Db
UPC Code 784644417706
Enrock 20W White Flexible Rubber Mast Long Range Marine Boat Yacht AM/FM Radio Antenna
The antenna includes a flexible mast for durability, along with a 180 swivel base for increased mounting options. It is corrosion resistant and includes 45 inch cable. Flexible mast. Angled mounting options allow you to install the 20W antenna in the most convenient locations. Corrosion resistant for the marine environment.
General Features:
- Flexible Mast AM/FM Marine Antenna
- 180 degrees Swivel base for maximum mobility and 45 inch cable
- Angled mounting options allow installation of the antenna in the most convenient locations
UPC Code 799861390336
