Marine Gauge Style USB Bluetooth AM/FM Radio Digital Media Receiver, 8x 6.5" 180 Watt Max 2-Way Boat Audio White Speakers, 2x 4-Channel Amplifier, 2x Amp Wiring Kit, Audio Splitter, Antenna (White)

---

New JBL PRV 175 AM/FM/USB/Bluetooth® Gauge Style Marine Boat Yacht Stereo Radio Player All-Environment Multimedia Stereo Receiver

JBL's PRV 175 marine digital media receiver will change the way you listen to music on your boat - without forcing you to cut or change your boat.

This digital media receiver packs a lot of features into a compact design that fits into a standard tachometer opening. You'll enjoy AM/FM radio, of course, plus built-in Bluetooth® that lets you stream music from your Android phone. You can also use the rear aux input for your music player, or plug a thumb drive into the rear USB port to enjoy your favorite music files.

The PRV 175 includes a set of rear-mounted preamp outputs, so you can expand your system with a marine amp in the future. The LED display tells you what you're listening to with just a glance, while the watertight, UV-stable face and controls will stand up to sun, salt and moisture when you're riding the waves.

General Features

• Marine Gauge Style Digital Media Receiver
• AM/FM tuner
• Bluetooth Audio Streaming
• Built-In Amplifier (45 peak x 4 channels)
• Waterproof Faceplate
• USB input and control-for USB drives only
• Auxiliary input
• 2 pair of RCA output
• Wired remote option

UPC Code 648701217503

---

Infinity's Marine speakers are constructed of solid, weather-resistant material, put together in the most careful, precise manner will provide you with a musical and listening experience that will keep you attached to your boat. The 6.5" speakers feature a polypropylene woofer cone bonded to a tough, UV-resistant rubber surround, which delivers full bass response and does a superb job deflecting sunlight and moisture. The corrosion-proof, cast-polymer basket resists deterioration from salt, moisture, and UV rays, while the stylish non-removable grille is specially meant for retaining its shiny chrome finish. The grille-mounted 1" tweeter offers excellent high-frequency projection. Infinity seals the front of the woofer cone along with the speaker's magnet structure, serving as extra protection against moisture. Stainless steel mounting hardware is not included.

6.5" Speaker:

• 6.5" 2-way Marine speakers
• Power range: 75 watts RMS / 225 Watts Peak
• Polypropylene woofer cone with UV-resistant rubber surround
• Grille-mounted 1" polypropylene semi-dome tweeter.
• Frequency Response: 50-20,000 Hz.
• Sensitivity: 92 dB

UPC Code 050667371890

---

Infinity's marine 3004A amplifier will add plenty of muscle to your music without breaking a sweat, and it'll look good doing it. This 4-channel powerhouse delivers 75 watts RMS to each of the front and rear speakers in your boat. Into planning ahead? You could use this amp in 2-channel mode now to drive a couple subwoofers with 200 watts RMS each, then reassign it to your front and rear speakers when you get a bigger sub amp. Speaker-level inputs allow this amplifier to work in almost any system, even if you're keeping your marine's factory radio. You can use the separate high and low pass filters on the front and rear channels to maximize the performance of your speakers or subs.

General Features:

• 4 Channel Marine Amplifier
• 75 watts RMS x 4 at 4 ohms
• 100 watts RMS x 4 at 2 ohms
• 200 watts RMS x 2 at 4 ohms in bridged mode (4-ohm stable in bridged mode)
• Class H amp technology
• Variable high and low-pass filters on front and rear channels
• Preamp and speaker-level inputs
• Preamp outputs
• Fuse rating: 30A x 2
• 8-gauge power and ground leads recommended
• Wiring and hardware not included

UPC Code 050667380106

---

The Power Sport Motorcycle Universal Amplifier Wiring Kit includes the following 6 foot length of red and black T-Spec OFC power and ground wire with a T-Spec V8MANL fuse holder, 60 amp fuse protected by a black nylon braid, Pre-terminated ring terminals, (2) 4 foot pieces of 16 gauge OFC speaker wire protected by black nylon mesh and 4"x6" hook and loop mounting pad for micro-amplifiers.

Amplifier Wiring Kit:

• Designed tor motorcycles
• 6 feet of red and black T-Spec OFC power and ground wire with a T-Spec V8MANL fuse holder and 60 amp fuse protected by a black nylon braid
• Pre-terminated ring terminals make connections to the battery simple
• Two 4 foot pieces of 16 gauge OFC speaker wire protected by black nylon mesh makes upgrading the factory speaker wires or adding new speakers a smart choice
• Upgrading Harmon Kardon System – Two 47-ohm .5 watt resistors to keep the factory radio outputs active
• All the necessary installation hardware is included along wtth a 4 × 6 inch hook and loop mounting pad for micro-amplifiers to hold the amplifier securely in place

UPC Code 086429332267

---

The Audiopipe signal splitter (SPLIT3003RCA) accepts 3 RCA inputs from a head unit: Front, Rear, and Subwoofer. Provides 3 amplified outputs for each input: 3 front outputs, 3 rear outputs, and 3 subwoofer outputs.

SPLIT-3003RCA AUDIO SIGNAL SPLITTER FEATURES:

• INPUT IMPEDANCE: 47K Ohms
• INPUT SENSITIVITY: 260mV
• S/N RATIO: >95dB -
• OUTPUT LEVEL (10KHz): >1V (1KHz)
• OUTPUT IMPEDANCE: 1K Ohms
• CHANNEL RESOLUTION: >60dB
• HARMONICS DISTORTION: 0.009%
• FREQUENCY RESPONCE: 20-20KHz -
• OUTPUT GAIN: 12Db

UPC Code 784644417706

---

The antenna includes a flexible mast for durability, along with a 180 swivel base for increased mounting options. It is corrosion resistant and includes 45 inch cable. Flexible mast. Angled mounting options allow you to install the 20W antenna in the most convenient locations. Corrosion resistant for the marine environment.

General Features:

• Flexible Mast AM/FM Marine Antenna
• 180 degrees Swivel base for maximum mobility and 45 inch cable
• Angled mounting options allow installation of the antenna in the most convenient locations

UPC Code 799861390336