Infinity USB Marine Receiver, 4x 8" 500W LED Speakers, USB/AUX Adapter, Antenna
There is no CD player in this unit, but it more than compensates with versatile connectivity to digital devices. Recharge via the USB port while you play digital music from smart phones, MP3 players and USB drives. Patch the audio in from your iPhone, iPod or any other source via the Aux audio inputs. Or stream your music wirelessly via Bluetooth.
The waterproof face is resistant to rain and splashing. With a full color dimmable display, this AM/FM radio receiver with 18 station presets, autotuning, and US/European frequency spacing is a complete audio product. Stream your music wirelessly from any Bluetooth compatible device. This receiver also features a rear USB port for charging and playing MP3 or WMA music files from smart phones.
General Features:
- AM/FM Bluetooth Audio Streaming
- 4 x 50 Watts
- Aux Input
- 3 1/2" cutout; 4 1/8" O.D.
- USB Input for USB Drives
- 3 Pair of RCA Pre-outs
- Charging Through USB
- Wired/Wireless Remote-Ready
- 6-Channel Preamp Outputs
- Marine-Grade Watertight Face
UPC Code 050667372873
The Universal USB/3.5mm Auxiliary Interface Mount and Cable measures 10 feet in length and will convert your AUX inputs to USB.
AUX/USB Adaptor:
- USB to RCA pass-through extension cable
- Cable Length: 3m (10ft)
UPC Code 799861390145
The Enrock EKMR2 Marine Wire Antenna provides excellent radio reception signals to the audio system on your automobile, watercraft vehicles. The flexible wire makes it the perfect hideaway antenna, while the corrosion-resistant rubber exterior confirms that it will stand up to salt and spray. The 40inch long flexible wire will make mounting it a breeze. Knowledgeable boaters realize that even the most expensive radio will perform poorly with a second rate antenna that saves money up front. A quality antenna is the crux of reliable performance in any marine radio. From the largest seagoing ships to the smallest bass boats, Enrock antennas have held up for years under the worst marine conditions, always performing to their maximum design capabilities.
General Features:
- Weather Resistant
- 40" Braided Cable.
- Full AM/FM reception.
UPC Code 799861388647
Infinity's Kappa Marine loudspeakers leverage Infinity’s world class audio engineering and music reproduction with purpose-built marine loudspeakers that will survive the rigors of the harsh marine environment. The lineup features the three most popular sizes for boats and watercraft. The 6-1/2" coaxial, 8" three-way convertible speaker system and 10" woofer have Plus One™ polypropylene woofer and midrange cones, Mylar tweeter domes (Except Subwoofer), one piece cast polymer baskets, sealed magnets, and rubber woofer surrounds for high SPL performance.
Wind, water or engine noise will not drown them out. Speakers are UV resistant in a marine grade IPX3(IPX5 from front)weather resistant and include RGB perimeter illumination and go through 300 hours of salt spray testing. And they're Infinity—ready to make amazing music on the water. Whether it's a daily scrub down, a picnic in a quiet cove or an all-out race across high swells, Infinity has the right configuration for your craft.
Features
Plus One™ Woofer Cones
Plus One cones provide more overall speaker-cone area than other cones in its class giving them higher sensitivity, increased low-frequency output and more distinguished musical character.Convertible Design
To increase loudspeaker acoustics and installation versatility, the 8" (200mm) Marine Three-Way Convertible can be coaxially mounted or separated and installed as a component system. This is handy for working around placement option restrictions.Perimeter Illumination
Unique and eye-catching RGB illumination can display seven colors out of the box—or an almost unlimited number of colors when connected to an external lighting controller.SSI (Switch-Selectable Impedance)
New Infinity Kappa Marine 10" (250mm) woofer features an exclusive dual impedance switch that lets you choose either 2- or 4-ohm load impedance option. SSI lets you reconfigure your system with the flip of a switch. (Not available from any other manufacturer.)Mylar Tweeters with Integrated Grilles
Weather resistant tweeters deliver smooth highs and increased power handling for more natural sound from vocals, cymbals, horns and pianos. (Grill mounted tweeters allow the front of the woofer cones to be sealed.)One-piece Polymer basket
The polymer basket is durable over time even after prolonged exposure to sun, salt and moisture. Rubber surrounds are more reliable than foam and offer better edge protection.High Sensitivity
A high sensitivity rating combined with above-average continuous power handling makes it one of the loudest boat speakers available without sacrificing clarity, fullness and musical character.Voicing of Speakers
Speakers are individually voiced to ensure they deliver Infinity's true sonic signature. This means that specifications as well as speaker characteristics are considered when tuning and authenticating the signature Infinity sound. This is part of the development process spearheaded by the leading transducer engineers in the world to provide the best listening experience at any price point.Harman Standard Reliability Testing
Infinity speakers undergo a testing process that would destroy lesser speakers. Infinity freezes them, bakes them, shakes them, blasts them with ultraviolet light and drives them at full power for days at a time.Infinity at an Affordable Price
This is Infinity—one of the most innovative and legendary companies in audio. Infinity is one of the top-selling car speaker brands in the world—obviously, this is no coincidence. If you know audio, you know Infinity in your car, your home—why not in your boat?General Specifications
- Power Handling 200 watts RMS, 500 watts peak power
- Pair Of Two
- Sensitivity 92dB at 2.83 volts
- Frequency Response 30 - 22kHz
- Voice Coil Diameter 1 in. (25.5mm)
- Impedance 3 ohm impedance
What's In The Box
- 2 x 8" (200mm) woofers, pr.
- 2 x Flush mount adapter with Integrated grille, pr.
- 12 x Screw
- 12 x Speed clip
- 1 x Spanner
- 2 x Closed cell foam gasket
- 1 x Twin pin tool
DO NOT USE DRILLS ON THE SCREW SPEAKER TERMINALS EVER.
Loosen and Tighten BY HAND ONLY. Using a Drill snaps the solder connection on the back of the terminal and the X-over (coax) Circuit board.
<
UPC Code
