Kicker KMC3 Marine Bluetooth USB RCA Stereo Receiver, 4x 6.5" Speaker, Wire
Your helm is the control center for party central! Equipped with an easily readable screen, rotary encoder and over 200 watts of total peak power into four channels, the KMC3 comes equipped with plenty of power. Add even more bump to your boat by adding amplifiers to the included RCA outputs. Connect your Bluetooth to the KMC3, plug into the included USB or RCA inputs, or turn on the AM/FM radio. Add a wired KRC12 remote for even more control. This durable media center is ready for some fun on the water!
General Features:
- Fits in gauge opening
- IPX66 certification
- Uses USB, RCA, AM/FM and Bluetooth audio sources
- USB audio playback or charging
- RCA outputs
- Power Output @ 14.4V, 4O stereo, <10% THD+N: 25x4
- Frequency Response [Hz]: 20-20k
- Signal-to-Noise Ratio [dB]: 87
- RCA Outputs: 1 Set of Pre-amp Outputs
- Line-Out Level [V]: 2.5
- Outer Trim Ring Dimensions [in, cm]: 3.5 x 5.5, 8.89 x 13.97
- Protrusion From Mounting Surface [in, cm]: 1.25, 3.1
- Mounting Depth [in, cm]: 3.9, 10
- Mounting Hole Diameter [in, cm]: 3, 7.62
- Mounting Panel Thickness Range [in, cm]: Any
- IP Rating: IP66
- AUX Input SensitivityAUX Input Sensitivity: 500 mV
- MP2, MP3, WMA, WAV16, FLAC16
- DC 5V, 1 AmpFAT32
- BT Range (feet): 30
UPC Code 713034013143
This Kicker 6.5” marine grade speaker emits great sound and appeal on any boat. Perfect for life at sea, these speakers are constructed with sealed motors, rubber cone surrounds and locking terminal covers to keep the internal components safe. They’ll be ok under harsh sunlight, due to special UV treatments on the cones, surrounds, baskets and grilles. Wherever you take them, those speakers will provide years of perfect performance.
The Kicker speaker is strong for marine use yet easy on the ears. The tough poly woofer and balanced dome tweeter plow through wind, waves and engine roar to provide you with clear sound without any roughness.
Product Description
- 6.5" 4-Ohm 2-Way Coaxial Marine Speaker
- Power Handling Per Speaker: 150 Watts Peak/50 Watts RMS
- 2-Way Design
- Santoprene surrounds
- Woofer Size: 6.5"
- Woofer Composition Polypropylene
- Tweeter Size: 1/2"
- Tweeter Dome Material: PEI (Polyetherimide)
- Impedance: 4-Ohms
- Sensitivity: 90dB
- Frequency Response: 35-21,000 Hz
- Cutout Dimensions: 5.18"
- Top-Mount Depth: 2.5"
- Grilles: White Only
- sealed motor structure and locking terminal covers
- 1/2" PEI film dome tweeter with neodymium magnet
- UV-treated polypropylene woofer with Santoprene rubber surround
- Comes in bulk packaging with no additional hardware or accessories
UPC Code 713034070184
KICKER’s ground-breaking virgin-PVC, Hyper-Flex insulation and multi-strand construction allows you to bend, twist, and contort the cable in any way imaginable for an ultimate installation experience while delivering maximum current flow; remains ultra-flexible under hot or cold temperature extremes; transfers the cleanest audio signal possible by using tightly twisted, silver-tinned OFC copper conductors; zip line to easily remove outer insulation.
- Hyper-Flex rope-lay speaker cables
- Silver-tinned OFC (oxygen-free copper) construction
- Superior bass response and signal clarity
- Hyper-Flex lay flat insulation virtually disappears under carpets
- Gauge: 16
- 50 Ft Long
UPC Code 033991044029
