Kenwood KMR-D382BT Single DIN Marine Bluetooth CD Radio Receiver, 4-Channel Amplifier w/Kit, 4x 6.5" 300W 2-Way Car Speakers w/Adapter, Wire, Antenna, Handlebar Control Kit, 98-2013 Harley Install Kit

---

Hook up this Kenwood marine receiver to your vehicle's sound system and gain control over a whole new world of features and media options all packed into a compact and sleek chassis. The KMR-D382BT receiver features built-in Bluetooth for easy streaming, AUX and USB inputs for an easy wired connection to your handheld, and a classic CD player for whenever you want to pop in a disc and bump your favorite tunes. With the Kenwood Remote App you'll be able to control most basic functions of the receiver over Bluetooth connection. With a conformal coated circuit board you know this system will hold up in the open-environment!

General Features:

• 255 Segment 1.5 Line Text Display
• Bluetooth Direct Access Button
• Variable Color Illumination
• 13-Band EQ & DTA
• Conformal Coating
• Optional Wired Remote Control Ready
• Front USB & AUX IN
• 3 Preouts 4.0V
• Music Mix
• Dual Phone Connection
• Kenwood Remote App Ready
• FLAC/WAV/MP3/WMA/AAC Compatible
• Android Rapid Charge vis USB Input
• Satellite Radio Ready
• Spanish and French Text Display Options
• CD Playback

UPC Code 019048232564

---

Enrocks EHDRAB98-13 allows you to install a single din receiver into your Harley Touring Bike. The wire harness is included with the dash kit to make wiring more convenient.

General Features:

• Single DIN radio provision
• For Harley Davidson (FL models with fairings) Touring 1998-2013
• Gapless fit between the dash and the kit

UPC Code 728120484431

---

The Axxess Integrate AXSWC will easily help with your modifications. Adding the AXSWC Steering Wheel handlebar control interface enables you to connect to an aftermarket stereo in your car or Harley Davidson motorcycle while containing the full functionality of your factory steering wheel controls. No need to cut or modify any of your OEM radio connections, this will save you hours of work.

General Features:

• Auto detects (1) vehicle type, radio connection, and presets controls
• Ability to dual assign steering wheel control buttons
• Can be manually programmed for most vehicles
• Retains settings even after battery disconnection or interface removal
• All connections done at the radio location
• Micro “B” USB updatable

UPC Code 086429383580

---

Enrock's EEA720.4 4-channel amplifier was designed compact yet rugged.  The outdoors can be a tough spot for audio gear so Enrock considered the salt, spray and sunlight when designing this Class D amplifier. With 45 watts RMS per channel this amplifier will drive your speakers no matter the application you are using it for. It’s compact enough for a bike and powerful enough for a car. You’ll have no trouble hearing your tunes over the wind and waves with this powerful amplifier.

Weather Resistant for Marine Application
Durable and Powerful for Automotive Use
Compact and rugged for Off-Road Installation

This compact amplifier will fit into a storage compartment on a boat, motorcycle, ATV, or car with optimal performance, despite its size. Should you decide to add a pair of subwoofers you can bridge this amp to a 2-channel mode and send 120 watts to each subwoofer, or switch to 3-channel mode to get a pair of speakers and a subwoofer. With high-pass and low-pass filters, plus bass boost, you can customize your sound output just the way you take your tunes.

EEA720.4 GENERAL FEATURES:

• 4-channel marine/powersports/ car amplifier
• 45 watts RMS x 4 at 4 ohms (60 watts RMS x 4 at 2 ohms)
• 120 watts x 2 bridged at 4 ohms
• Class D amp technology
• 720 Watts Peak Power
• variable high- and low-pass filters
• Sealed Chassis for use in harsh environments
• Ultra-efficient full range class D operation
• Built-in Crossover- maximum flexibility
• 2 or 4 channel input
• Signal to noise ratio 97db
• High pass filter 120Hz/80Hz
• Input range: 200mV-10V
• Frequency Response: 20Hz to 20KHz

UPC Code 728120454069

---

The Power Sport Motorcycle Universal Amplifier Wiring Kit includes the following 6 foot length of red and black T-Spec OFC power and ground wire with a T-Spec V8MANL fuse holder, 60 amp fuse protected by a black nylon braid, Pre-terminated ring terminals, (2) 4 foot pieces of 16 gauge OFC speaker wire protected by black nylon mesh and 4"x6" hook and loop mounting pad for micro-amplifiers.

Amplifier Wiring Kit:

• Designed tor motorcycles
• 6 feet of red and black T-Spec OFC power and ground wire with a T-Spec V8MANL fuse holder and 60 amp fuse protected by a black nylon braid
• Pre-terminated ring terminals make connections to the battery simple
• Two 4 foot pieces of 16 gauge OFC speaker wire protected by black nylon mesh makes upgrading the factory speaker wires or adding new speakers a smart choice
• Upgrading Harmon Kardon System – Two 47-ohm .5 watt resistors to keep the factory radio outputs active
• All the necessary installation hardware is included along wtth a 4 × 6 inch hook and loop mounting pad for micro-amplifiers to hold the amplifier securely in place

UPC Code 086429332267

---

These CS-Series 6-1/2-inch Coaxial Speakers are the perfect way to upgrade your factory speakers. CS-Series Coaxials deliver remarkable performance and ultra-clean bass with a heavy-duty motor/magnet structure not found in stock speakers. The stamped-steel framework supports a rigid polypropylene cone with EVC (Extended Voice Coil) technology for the best sonic quality. Using zero-protrusion PEI tweeters with neodymium magnets, you get the clarity you need without interfering with factory grilles. These CS speakers work best with 100 watts of recommended power.

General Features:

• 6.5" 2-Way Design Speaker
• 300W Peak Power
• 100W RMS Continuous Power
• 90dB Sensitivity
• 40-20kHz Effective Frequency Range
• Zero-protrusion tweeters to fit nearly any factory depth
• UV-treated poly-foam surround resists heat or direct sunlight
• Large woofer magnet in a heavy-duty motor for ultra-clean bass
• PEI-tweeter construction provides superb clarity
• Neodymium tweeter magnets allow for increased volume in high frequencies
• Steel mesh grilles included for speaker protection

UPC Code 713034088363

---

Enrocks EHDSA98-13 brackets will allow you to install select 6.5" or 6.75" speakers in the factory speaker openings of select 1998 - 2013 Harley Davison Bikes. 

General Features:

• 6-1/2" - 6-3/4" Speaker Adapter Plate
• For 1998-2013 (FL models with fairings) Harley Davidson Touring
• Gapless fit between the speaker and the kit
• High-grade ABS plastic construction
• Color: Black

UPC Code 728120484486

---

This rugged Enrock EKMR1 marine soft wire universal antenna gives you performance, durability and plenty of placement options. The flexible wire makes it the perfect hideaway antenna, while the corrosion-resistant rubber exterior confirms that it will stand up to salt and spray. The 22inch long flexible wire will make mounting it a breeze.

General Features:

• 22" AM/FM Marine Antenna
• Improves Radio reception

UPC Code 799861388630

---

Enrock's 16-Gauge Speaker Wire is a smart solution to your audio installation. This wire comes in 50 feet to give you convenient installation and pure sound quality enhancement. The cable is tinned and oxygen free copper (OFC) to deliver high-quality sound without any transmission loss. Marine grade speaker wiring made simple. Just use high quality marine duplex wiring with it's fine stranded tin plated copper to resist corrosion.

General Features:

• Connects audio speakers to your Audio Video (A/V) receiver or amplifier.
• Marine grade tinned wire
• Oxygen Free Copper (OFC)
• Length: 50 Feet
• Gauge: 16

UPC Code 728120479901