JVC Marine Bluetooth CD Receiver, 2x 6.5" 300W Speakers, Harley 98-13 Extras
JVC KD-T92MBS marine receiver features CD playback and a classic AM/FM tuner so you can choose between listening to your own tunes and the radiowaves with ease. Bluetooth connectivity lets you conveniently connect your preferred handheld device to the receiver and the USB port allows for high current charging to keep your device powered.
General Features:
- CD Receiver featuring Bluetooth
- AUX/USB Inputs
- Backlit Display
- Conformal Coated PCB
- 13-Band EQ
- 2-Zone Variable-Color Illumination
- JVC Remote App Compatibility
- 4.0V High-Voltage 3 Pre-Outs
- Space Enhancement
- Sound Response
- Sound Lift
- Audio Streaming Control
- iPhone Bluetooth Automatic Pairing
- 2-Line VA LCD Display
- High Current 1.5A Charging
- Satellite Radio Ready
- Wired Remote Control (Optional)
- Steering Wheel Remote Control Ready
- AM/FM Tuner
- 18FM, 6AM Preset Stations
- MP3/WMA/WAV/AAC/FLAC Playback
UPC Code 046838002380
These CS-Series 6-1/2-inch Coaxial Speakers are the perfect way to upgrade your factory speakers. CS-Series Coaxials deliver remarkable performance and ultra-clean bass with a heavy-duty motor/magnet structure not found in stock speakers. The stamped-steel framework supports a rigid polypropylene cone with EVC (Extended Voice Coil) technology for the best sonic quality. Using zero-protrusion PEI tweeters with neodymium magnets, you get the clarity you need without interfering with factory grilles. These CS speakers work best with 100 watts of recommended power.
General Features:
- 6.5" 2-Way Design Speaker
- 300W Peak Power
- 100W RMS Continuous Power
- 90dB Sensitivity
- 40-20kHz Effective Frequency Range
- Zero-protrusion tweeters to fit nearly any factory depth
- UV-treated poly-foam surround resists heat or direct sunlight
- Large woofer magnet in a heavy-duty motor for ultra-clean bass
- PEI-tweeter construction provides superb clarity
- Neodymium tweeter magnets allow for increased volume in high frequencies
- Steel mesh grilles included for speaker protection
UPC Code 713034088363
Custom spacer designed for installation of 6-1/2 to 6-3/4 inch aftermarket speakers and works with all varieties of speakers including component drivers. These adapters provide a gapless fit between the speaker and the kit. Painted to match factory color. High-grade ABS plastic construction for increased durability.
General Features:
- 6-1/2" - 6-3/4" Speaker Adapter Plate
- For 1998-2013 Harley Davidson Touring vehicles
- Designed and manufactured with precision tolerances
- Gapless fit between the speaker and the kit
- Painted to match factory color
- Factory matched texture style
- High-grade ABS plastic construction
- Color: Black
Compatibility List:
- 1998 - 2013 Electra Glide with Fairing
- 1998 - 2013 Road Glide with Fairing
- 2006 - 2013 Street Glide with Fairing
UPC Code 086429288472
The Metra 99-9600 will create a smooth transition. This kit is designed with high quality automotive grade ABS plastic to match the texture of your factory dash. The Metra 99-9600 contains the trim for a single ISO DIN stereo. The trim has a rubber trim gasket to fight the open-environment and vibration. The kit also contains a wire harness as well as it’s pre-wired for the ASWC-1 Handlebar/Steering Wheel Control Interface (ASWC-1 sold separately).
NOTES:
- DOES NOT MOUNT WITH RADIO SLEEVE, MUST BE REAR LOADED AND USE THE PROVIDED BRACKETS (ISO-MOUNTING ONLY)
- MOTORCYCLE MUST BE EQUIPPED WITH SHARKNOSE FAIRING 1998-2013, WILL ALSO WORK WITH 1998-2013 FLH BATWING FAIRING
- THIS INSTALLATION KIT WILL NOT WORK WITH 1996 - 1997 DUAL CONNECTORSRETRO SOUND SYSTEMS, ADDITIONAL HARDWARE/ADAPTER IS NEEDED (SOLDSEPARATELY)
General Features:
- Single DIN radio provision
- For Harley Davidson Touring 1996-2013
- Designed and manufactured with precision tolerances
- Gapless fit between the dash and the kit
UPC Code 086429288526
The BC-HDSWC-WR Harley-Davidson Handlebar Control allows installers to replace the radio in a motorcycle, while retaining the use of the factory handlebar audio controls. This easy-to-install interface uses a patented Auto-Detect system to configure itself for the specific motorcycle application and aftermarket radio being installed. The interface provides wires for front speakers, constant power, switched power and ground, and includes a water-resistant enclosure. This product works with the 95-HDIF2 Harley-Davidson Road Glide FLT/Sharknose fairing (sold separately). It can be made to work with all models by pairing with Metra’s BC-9725 Amp Bypass Harness.
General Features:
- Retains the factory handlebar audio controls
- Auto-Detect configures itself for the specific motorcycle application and aftermarket radio
- Comes with a plug-n-play harness in a water-resistant case
- Provides wires for speakers, constant power, switched power and ground
- Use the BC-9711 to retain rear speakers
- This part number replaces the HD-ASWC-1
Note:
- Fits Harley-Davidson FLH & FLT 1998-2013 (FL models with a fairing)
- Must be without factory amplifier, 2 speaker systems only
UPC Code 086429415762
EnrockBasic 14-Gauge Speaker Wire
This 14-gague speaker wire with spool from EnrockBasics lets you easily connect your speakers to amplifiers or receivers.
Marked Polarity
One side of the wire is marked with a white line, making it quick and easy to distinguish the polarity and get your audio system set up properly
Easy to Use
The EnrockBasics 14-gauge Speaker Wire comes wrapped around a hard plastic spool that makes dispensing convenient and easy.
Details
Connects audio speakers to your A/V receiver or amplifier
No Distortion
The plastic jacket around the speaker wire helps to deliver high-quality undistorted signals to and from all of your audio equipment.
General Features:
- 50 Feet of 14-gauge speaker wire.
- Connects audio speakers to your A/V receiver or amplifier.
UPC Code 728120443940
