Kicker Marine Radio Receiver, 6.5" 195W LED Speaker (QTY 4), Amp, Remote,2x Wire
Meet the control center for fun on your boat! Equipped with an easily readable screen, rotary encoder and over 200 watts of total peak power into four channels, the KMC2 comes equipped with plenty of power. Add even more bump to your boat by adding amplifiers to the included RCA outputs. Connect your Bluetooth to the KMC2, plug into the included USB or RCA inputs, or turn on the AM/FM radio. Add a wired KRC12 remote for even more control. This durable media center is ready for some fun on the water!
General Features:
- AM/FM/Bluetooth Streaming Up to 30 Feet
- USB Charging and Thumb-Drive Playback
- Four Channel Speaker Output and Full-Range RCA Output
- Customizable EQ
- Fits in Gauge Opening
- Uses USB, RCA, AM/FM, Bluetooth Audio Sources
- USB playback and Charging
- Rotary Encoder
- AUX Input Sensitivity
- Power Output: 25W x 4
- Frequency Response: 20-20kHz
- Signal to Noise Ratio: 87dB
- IP Rating: IPX66
- Works with KRC12 Remote (Sold Separately)
UPC Code 713034013136
The Kicker 6.5" Coaxial Tower System works best with 65 watts of recommended power. The injection-molded polypropylene speaker cones are UV-treated and matched with Santoprene surrounds for excellent sound quality and durability in any weather. The UV-resistant finish is anti-fading and anti-corrosion. Mounting hardware is forged from rustproof, 316L stainless-steel. With customizable Grille With Seven-Color LED System Included, Upgradable to 20 Colors and 19 Lighting Modes with KMLC.
General Features:
- 6.5" Marine Coaxial Tower Speaker
- Power Handling: 195 Watt Peak
- Power Handling: 65 watt RMS
- Grille With Seven-Color LED System Included*
- Upgradable to 20 Colors and 19 Lighting Modes with KMLC remote
- 4-Ohm Voice Coil
- UV-Treated Polypropylene Woofer With Santoprene Surround
- UV-Resistant Polymer Basket
- 316L Stainless Mounting Hardware Included
- Meets or Exceeds ASTM Standards for UV and Salt/Fog Exposure
- Sensitivity: 90dB
- Frequency Response (Hz): 35-21K
UPC Code 713034000440
Using a Class-D power plant, this amp features a variable bass boost with KickEQ™, giving you as much as 6dB of extra bump. Powering as many as eight speakers, this amplifier makes your entire boat sound like a floating concert! A powerful 12dB crossover is also included, letting you quickly tune your system to perfection. This KM-Series amplifier delivers 90 watts into four channels, or 180 watts bridged into two channels.
General Features:
- Class D Power Supply
- 500 Watts of Dynamic Power
- Four-Channel Amplifier with Bridging Capability
- Conformal-Coated Circuit Board
- Variable 12dB Crossover
- KickEQ Variable 6dB Bass Boost
- Real Marine ABYC/NMMA-Compliant Power Connections
- 316L Stainless-Steel Hardware Included
- POWER [watts/ch], 2 OHM STEREO: 90 x 4
- POWER [watts/ch], 4 OHM BRIDGED MONO: 180 x 2
- DYNAMIC POWER [watts]: 500
- DIMS [in] all models 2-5/16H x 7-1/8W x ___L: 12-7/16
- DIMS [cm] all models 5.9H x 18.0W x ___L: 31.5
- FREQUENCY RESPONSE [Hz]: 10-20k, +0/-1dB
- High Level Sensitivity: 250mV-10V
- Low Level Sensitivity: 125mV-5V
- SIGNAL-TO-NOISE RATIO: >95dB, a-weighted, re: rated power
- ACTIVE CROSSOVER: 12dB/octave, variable 50-200Hz, selectable high pass, low pass or all pass
- KickEQ BOOST Variable 0-6dB, centered @ 40Hz
UPC Code 713034020370
This controller provides multi-function control of LED lighting in KICKER Marine Coaxials and Subwoofers for a customized look. The ultra-slim remote manages 20 different bright colors for those who like a frequent change. The 19 dynamic modes, including adjustable brightness, fade, speed/strobe and auto save, give the user the ultimate control over their boating aesthetics.
General Features:
- Marine LED Remote Controller
- Provides ultimate control over lights
- Ultra slim remote design
- Multi-function control of LED lighting
- 19 dynamic modes including adjustable brightness, fade, speed/strobe and auto save
- Compatible with Kicker marine coaxial speakers and subwoofers
UPC Code 713034070238
A ground-breaking virgin-PVC, Hyper-Flex insulation and multi-strand construction allows you to bend, twist, and contort the cable in any way imaginable for an ultimate installation experience while delivering maximum current flow; remains ultra-flexible under hot or cold temperature extremes; transfers the cleanest audio signal possible by using tightly twisted, silver-tinned OFC copper conductors; zip line to easily remove outer insulation.
- Hyper-Flex rope-lay speaker cables
- Silver-tinned OFC (oxygen-free copper) construction
- Superior bass response and signal clarity
- Hyper-Flex lay flat insulation virtually disappears under carpets
- Gauge: 16
- 50 Ft Long
UPC Code
