Kicker KEY5001 500 Watt Mono Amplifier, Dual Bass Remote, Wiring Install Kit
The Kicker KEY500.1 is a smart subwoofer amplifier and audio processor in one, featuring an AI-driven DSP (digital signal processing). Using Kicker’s supplied test tones (below), the KEY automatically analyzes the audio being fed into the amplifier. Once this signal has been analyzed, the amp will automatically fix peaks in the signal coming in and restore the low bass that is typically missing. In a matter of moments, you get a clean, even bass response from your amp!
The amplifier also features FIT 2+ (Fail-safe Integration Technology 2 PLUS) – which provides nearly universal compatibility with stock or aftermarket radios. Another industry first, the KEY500.1 is uniquely suited to accept factory input signals as high as 40 volts (400 watts). The KEY amplifier will work with almost every car on the road today, whether you have a factory or aftermarket audio system.
General Features:
- Power (watts/ch), 1 Ohm stereo: 500
- Power (watts/ch), 2 Ohm stereo: 300
- Power (watts/ch), 4 Ohm stereo: 150
- Standard dimensions in.(H x W x L): 1-11/16 x 4-1/8 x 8-1/8
- Metric dimensions cm(H x W x L): 4.3 x 9.2 x 20.7
- Frequency Response (Hz): 10-160
- Input Sensitivity: high level: 1V-40V / low level: 125mV-5V
- Signal-to-Noise Ratio: >90dB, a-weighted, re: rated power
- Selectable Electronic Crossover: Variable Low Pass 40-160 Hz, Variable High Pass 10-40 Hz
What's in the Box:
- 1 - fuse holder
- 1 - manual and installation hardware
UPC Code 713034013280
While controlling up to two KICKER CXARC remote-compatible amps, the DBRC uses a surface mount with magnetic mounting plate or flush mount for ultimate flexibility. Heavy-duty aluminum design with laser etching for high-end look.
General Features:
- For use with all KICKER mono amplifiers (or amps with mono channels) and powered subwoofers
- Controls one or two mono-channel amps that utilize a 3.5mm level controller input
- Compatible with KICKER PTRTP Powered Sub Enclosures, Hideaway Powered Sub Enclosures, WXA-Series Amps, KEY-Series Amps, CXA-Series Amps, PXA-Series Amps and KPX-Series Amps (not compatible with KICKER Marine Amps)
- Single knob with high-end, metal look
UPC Code 713034092117
The Kicker complete amp kit features top-quality Hyper-Flex power, ground and turn-on cables. K Series speaker wire and interconnects are also included, as is a heavy-duty AFS fuse holder and fusing. Insulated crimp connectors and zip ties come in the kit as well.
Comes complete with Full Spec wire, hardware, fusing and signal cable.
Hooking up your amplifier is easy with this complete amp kit. All kits include pure, full-spec OFC (oxygen-free copper) cabling for max power transfer, superior bass response and signal clarity.
Included In Amp Kit:
- 17 ft 4 awg blue power wire
- 4 ft 4 awg gray ground wire
- Self tapping bolt and washer
- FHS fuse holder with 100 amp fuse L=3.06", W=1.33", H=1.32"
- 17 ft 16 gauge remote wire
- 16.4 ft KI RCAs
- 12 ft Q series 12 awg speaker wire
- 6x 6" zip ties
- 4 awg firewall grommet
- 1x 18-22 awg butt connector
- 4x 12 awg fork terminals
- 2x blue fork terminal boots
- 2x black fork terminal boots
UPC Code 713034088653
