JVC Single-DIN Marine Radio, 4x 6.5" 150W Max Speakers, 10" Subwoofer, Amplifier
This JVC KD-X560BT marine/motorsports digital media receiver features an array of multimedia functions that will be sure to boost your vehicle's sound system to the next level. With built-in Bluetooth capabilities and rearview camera inputs, you can expand this receiver's media possibilities in myriad ways. The conformal coated PCB ensures that the electronic circuits are safeguarded from the elements, providing prime protection from use in the open environment.
General Features:
- Single-DIN Digital Media Receiver
- Built-In Bluetooth
- 3" Color Display
- Conformal Coated PCB
- Camera Input
- 13-band EQ (9-Preset EQ)
- AUX/USB Inputs
- Time Alignment
- Shallow Chassis
- Blue Key Color Illumination
- Multilingual Display
- MP3/WMA/WAV/AAC/FLAC/H.264/JPEG/PNG/BMP Playback
- Hands Free Call
- Android Music Playback
- iOS Compatible
- 30 Preset Stations
- Wireless Remote Control Ready (Optional)
- Maximum Power Output (Front & Rear): 45W x 4
- Full Bandwidth Power (Front & Rear): 16W x 4
UPC Code 046838079948
Get first-rate JVC speakers to experience vibrant and high quality sound while listening to a variety of music styles. Created using advanced manufacturing technologies, they offer the performance level you've come to expect and provide reliable service for long years. These speakers feature waterproof and weather-resistant design, making them perfect for open environment applications!
General Features:
- 6.5" DRVN Series 2-way Coaxial Marine Speakers.
- Peak Power: 150 Watts
- RMS Power: 50 Watts
- Carbon Mica Cone Woofer, 16 cm (6-1/2'')
- Rubber Surround.
- 4 ohms impedance.
- 1" Poly-Ether Imide Balanced Dome Tweeter.
- Voice coil size and type.
- 8.1oz. Ferrite magnet motor structure.
- Sound Pressure Level: 87dB/W.m.
- Frequency Response: 60 -18,400 Hz.
- Sensitivity: 87dB.
- Mounting Depth: 61.5 mm (2-7/16")
UPC Code 046838074042
This JVC marine amplifier is rated waterproof and dustproof. A Drain Tunnel Structure is employed for creating a gap between the amplifier and the installation surface. This prevents saltwater and sand from accumulating on the bottom, increasing corrosion protection. The amplifier mounting section is made of 15/64 inch die-cast material to suppress the amplification of vibration. In addition, the thick heat-transfer sheet was also placed to the substrate and the Aluminum die cast heat sink to suppress the vibration of the substrate. Thicker terminal connection points and increased wire size enables maximum current flow and higher output for better low frequency response and cleaner output. High Quality PMLCAP’s (Polymer Multi-Layer Capacitors) are utilized to lower distortion levels, improving the overall listening experience at higher volumes, while maintaining the integrity of the sound. Magnetic Shielding for the output coils reduce radiated noise, delivering smooth and accurate sound.
General Features:
- Max Power Output: 600W
- Rated Power Output @ Stereo (4Ω): 50W x 4 (20Hz–20kHz, ≤1.0% THD)
- Rated Power Output @ Stereo (2Ω): 75W x 4 (1kHz, ≤1.0% THD)
- Rated Power Output @ Bridged (4Ω): 150W x 2 (1kHz, ≤1.0% THD)
- Speaker Impedance: 4Ω (2Ω to 8Ω allowable)
- Speaker Impedance for Bridged connection: 4Ω to 8Ω allowable
- Frequency response (+0, –3dB): 10Hz–35kHz
- Input Sensitivity (RCA): 0.2V-5.0V
- Signal to noise ratio: 89dB
- Low pass filter frequency (–12dB/oct.): 50Hz–200Hz (variable)
- High pass filter frequency (–12dB/oct.): 50Hz–200Hz (variable)
- Operating voltage: 12V DC car battery
- Current consumption: 26A
- Operational temperature range: –10°C – 60°C
- Dimensions (W × H × D): 7-13/16" x 1-15/16" x 4-1/8"
- Weight: 1.6kg (3.5lbs)
- Waterproof Dustproof Vibrationproof: IP66, IP67
UPC Code 046838001925
The JVC CW-DR10140ML 10 inch Subwoofer offers a tough design that conforms to the IPX6 standard, so you can enjoy high-quality music playback even under the harsh environment of marine and motorsports use. The speakers are also equipped with LED Illumination giving you the option of 21 color illumination with remote control. The durability of the vibration system has been greatly enhanced to handle the high input power of 300W RMS. This delivers clear and powerful bass sound reproduction.
General Features:
- Subwoofer Cone Size: 10 inch
- Power Handling Capacity (Peak power) - 1300W
- Power Handling Capacity (RMS power) - 300W
- Impedance - 4 ohms
- 21-Color Illumination LED with remote
- Remote Control Included
- Rated IPX6 for water and dust ingress protection
- UV Resistant Woofers
UPC Code 046838500275
Seaworthy RTR700W White Marine Stereo Splash Cover
General Features:
- Fits standard DIN size shaftless stereos
- Door snaps closed securely
- Rubber gasket seals door closed so water cannot penetrate
- Heavy duty Lexan plastic cover
UPC Code
This rugged Enrock EKMR1 marine soft wire universal antenna gives you performance, durability and plenty of placement options. The flexible wire makes it the perfect hideaway antenna, while the corrosion-resistant rubber exterior confirms that it will stand up to salt and spray. The 22inch long flexible wire will make mounting it a breeze.
Radio Antenna:
- 22" AM/FM Marine Antenna
- Improves Radio reception
UPC Code 799861388630
The Power Sport Motorcycle Universal Amplifier Wiring Kit includes the following 6 foot length of red and black T-Spec OFC power and ground wire with a T-Spec V8MANL fuse holder, 60 amp fuse protected by a black nylon braid, Pre-terminated ring terminals, (2) 4 foot pieces of 16 gauge OFC speaker wire protected by black nylon mesh and 4"x6" hook and loop mounting pad for micro-amplifiers.
Amplifier Wiring Kit:
- Designed tor motorcycles
- 6 feet of red and black T-Spec OFC power and ground wire with a T-Spec V8MANL fuse holder and 60 amp fuse protected by a black nylon braid
- Pre-terminated ring terminals make connections to the battery simple
- Two 4 foot pieces of 16 gauge OFC speaker wire protected by black nylon mesh makes upgrading the factory speaker wires or adding new speakers a smart choice
- Upgrading Harmon Kardon System – Two 47-ohm .5 watt resistors to keep the factory radio outputs active
- All the necessary installation hardware is included along wtth a 4 × 6 inch hook and loop mounting pad for micro-amplifiers to hold the amplifier securely in place
UPC Code 086429332267
