JVC KD-T91MBS Receiver, 2x 6.75" Speakers, Handlebar Controls, Amp, Accessories
JVC KD-T92MBS marine receiver features CD playback and a classic AM/FM tuner so you can choose between listening to your own tunes and the radiowaves with ease. Bluetooth connectivity lets you conveniently connect your preferred handheld device to the receiver and the USB port allows for high current charging to keep your device powered.
General Features:
- CD Receiver featuring Bluetooth
- AUX/USB Inputs
- Backlit Display
- Conformal Coated PCB
- 13-Band EQ
- 2-Zone Variable-Color Illumination
- JVC Remote App Compatibility
- 4.0V High-Voltage 3 Pre-Outs
- Space Enhancement
- Sound Response
- Sound Lift
- Audio Streaming Control
- iPhone Bluetooth Automatic Pairing
- 2-Line VA LCD Display
- High Current 1.5A Charging
- Satellite Radio Ready
- Wired Remote Control (Optional)
- Steering Wheel Remote Control Ready
- AM/FM Tuner
- 18FM, 6AM Preset Stations
- MP3/WMA/WAV/AAC/FLAC Playback
UPC Code 046838002380
These CS-Series 6-3/4-inch Coaxial Speakers are the perfect way to upgrade your factory speakers. CS-Series Coaxials deliver remarkable performance and ultra-clean bass with a heavy-duty motor/magnet structure not found in stock speakers. The stamped-steel framework supports a rigid polypropylene cone with EVC™ (Extended Voice Coil) technology for the best sonic quality. Using zero-protrusion PEI tweeters with neodymium magnets, you get the clarity you need without interfering with factory grilles. These CS speakers work best with 100 watts of recommended power.
General Features:
- 2-Way Speaker Design
- 6.75" Woofer Size
- .5" Tweeter Size
- 3.3 Ohms DC Resistance
- 300W Peak Power
- 100W RMS Power
- 90dB Sensitivity
- 40-20kHz Frequency Range
- 5.5" Mounting Hole Diameter
- 3/16" Top Mount Depth
- 1-13/16" Bottom Mount Depth
- Fits nearly every car made
- Zero-protrusion tweeters to fit nearly any factory depth
- Woofer EVC™ (Extended Voice Coil) tech assists with precise linear excursion
- UV-treated poly-foam surround resists heat or direct sunlight
- Large woofer magnet in a heavy-duty motor for ultra-clean bass
- PEI-tweeter construction provides superb clarity
- Neodymium tweeter magnets allow for increased volume in high frequencies
- Steel mesh grilles included for speaker protection
UPC Code 713034088370
You can use the Infinity Kappa Perfect amplifier in bridged 1-channel mode to power a subwoofer with 300 watts RMS. Selectable high- and low-pass filters let you tune the signals to match your speakers and subs, while a bass boost adds punch to the low end. A removable weather-proof panel protects the controls, and the tough aluminum chassis and conformal-coated circuit boards help keep the music playing even when the going gets wet and dirty.
General Specifications:
- 2-Channel Amplifier
- Class D Technology
- RMS Power: 100W x 2 @ 4-ohm / 150W x 2 @ 2-ohm / 300Wx1 @ 4-ohm
- Peak Power: 750W
- Selectable Crossover: All-Pass, High-Pass, or Low-Pass
- Frequency Response: 20Hz to 20kHz
- Selectable Bass Boost
- SNR Ratio: 75dB
UPC Code 050036395366
Looking to switch to Satellite Radio, now is the time. The SiriusXM connect Vehicle Tuner comes with a three months of service free*. This tuner is easy to use and can give any SiriusXM Ready car stereo crystal clear reception. It is so easy to install you will be setup and ready to go in no time; so you never miss a beat. It comes with a magnetic antenna mount, SiriusXM connect Vehicle Tuner, and an installation guide. This tuner is compatible with many different professional car stereo brands like, Advent, Alpine, Car show, Clarion, Dual, Fusion, Garmin, Jensen, Jensen Heavy Duty, Jensen Marine, JVC, Kenwood, Magnadyne, Panasonic, Pioneer, Polk, Rockford Fosgate, Rosen, Sony, West Marine, and Xite Solutions. See above pictures for a complete list of compatible stereo models. *See complete details on the SiriusXM website.
General Features:
- Satellite Connect vehicle tuner with 25 ft cable
- Satellite antenna with 23 ft cable
- works only with in-dash receivers with the Satellite Ready logo
- TuneMix and SportsFlash
- pause, rewind, and replay up to 60 minutes of live satellite radio broadcasts
- game, song, and artist alerts
- Satellite Xtra Channels
UPC Code 884720013164
The Metra 99-9600 will create a smooth transition. This kit is designed with high quality automotive grade ABS plastic to match the texture of your factory dash. The Metra 99-9600 contains the trim for a single ISO DIN stereo. The trim has a rubber trim gasket to fight the open-environment and vibration. The kit also contains a wire harness as well as it’s pre-wired for the ASWC-1 Handlebar/Steering Wheel Control Interface (ASWC-1 sold separately).
NOTES:
- DOES NOT MOUNT WITH RADIO SLEEVE, MUST BE REAR LOADED AND USE THE PROVIDED BRACKETS (ISO-MOUNTING ONLY)
- MOTORCYCLE MUST BE EQUIPPED WITH SHARKNOSE FAIRING 1998-2013, WILL ALSO WORK WITH 1998-2013 FLH BATWING FAIRING
- THIS INSTALLATION KIT WILL NOT WORK WITH 1996 - 1997 DUAL CONNECTORSRETRO SOUND SYSTEMS, ADDITIONAL HARDWARE/ADAPTER IS NEEDED (SOLDSEPARATELY)
General Features:
- Single DIN radio provision
- For Harley Davidson Touring 1996-2013
- Designed and manufactured with precision tolerances
- Gapless fit between the dash and the kit
UPC Code 086429288526
The BC-HDSWC-WR Harley-Davidson Handlebar Control allows installers to replace the radio in a motorcycle, while retaining the use of the factory handlebar audio controls. This easy-to-install interface uses a patented Auto-Detect system to configure itself for the specific motorcycle application and aftermarket radio being installed. The interface provides wires for front speakers, constant power, switched power and ground, and includes a water-resistant enclosure. This product works with the 95-HDIF2 Harley-Davidson Road Glide FLT/Sharknose fairing (sold separately). It can be made to work with all models by pairing with Metra’s BC-9725 Amp Bypass Harness.
General Features:
- Retains the factory handlebar audio controls
- Auto-Detect configures itself for the specific motorcycle application and aftermarket radio
- Comes with a plug-n-play harness in a water-resistant case
- Provides wires for speakers, constant power, switched power and ground
- Use the BC-9711 to retain rear speakers
- This part number replaces the HD-ASWC-1
Note:
- Fits Harley-Davidson FLH & FLT 1998-2013 (FL models with a fairing)
- Must be without factory amplifier, 2 speaker systems only
UPC Code 086429415762
Custom spacer designed for installation of 6-1/2 to 6-3/4 inch aftermarket speakers and works with all varieties of speakers including component drivers. These adapters provide a gapless fit between the speaker and the kit. Painted to match factory color. High-grade ABS plastic construction for increased durability.
General Features:
- 6-1/2" - 6-3/4" Speaker Adapter Plate
- For 1998-2013 Harley Davidson Touring vehicles
- Designed and manufactured with precision tolerances
- Gapless fit between the speaker and the kit
- Painted to match factory color
- Factory matched texture style
- High-grade ABS plastic construction
- Color: Black
Compatibility List:
- 1998 - 2013 Electra Glide with Fairing
- 1998 - 2013 Road Glide with Fairing
- 2006 - 2013 Street Glide with Fairing
UPC Code 086429288472
This Kicker 8 Gauge Power Amplifier Wiring Kit includes all the necessary hardware and wire to power one amplifier and is designed specifically for car audio systems up to 1000 watts. The included premium power/ground cable is made from 100% oxygen-free copper and is true-to-gauge for ultimate power transfer.
This PK8 power amp kit includes 17-feet of 8 Gauge power cable, 2-feet of 8 Gauge ground cable, 17-feet of 16 Gauge remote turn-on wire, 2-channel RCA cable, Maxi Fuse holder, 60 Amp fuse and more. KICKER® amp power kits feature top-quality Hyper-Flex™ power, ground and turn-on cables. A heavy-duty AFS fuse holder, fuse, terminals and zip ties come in the kit as well. One additional year of amplifier warranty is included if purchased with a KICKER amp.
AMP KIT
- 8 Gauge OFC Power Amplifier Installation Kit
- Designed specifically for car audio systems up to 1000 watts
- Premium power and ground wire provides optimal power transfer
- Made from 100% oxygen-free copper for a pure uninterrupted transfer of power
- Includes 2-channel RCA interconnect cables for the audio signal connection from the receiver to the amplifier
UPC Code
