JVC KDT91MBS Radio, Cover, 2x 5.25" Speakers, Amp, Control Interface,Install Kit
JVC KD-T92MBS marine receiver features CD playback and a classic AM/FM tuner so you can choose between listening to your own tunes and the radiowaves with ease. Bluetooth connectivity lets you conveniently connect your preferred handheld device to the receiver and the USB port allows for high current charging to keep your device powered.
General Features:
- CD Receiver featuring Bluetooth
- AUX/USB Inputs
- Backlit Display
- Conformal Coated PCB
- 13-Band EQ
- 2-Zone Variable-Color Illumination
- JVC Remote App Compatibility
- 4.0V High-Voltage 3 Pre-Outs
- Space Enhancement
- Sound Response
- Sound Lift
- Audio Streaming Control
- iPhone Bluetooth Automatic Pairing
- 2-Line VA LCD Display
- High Current 1.5A Charging
- Satellite Radio Ready
- Wired Remote Control (Optional)
- Steering Wheel Remote Control Ready
- AM/FM Tuner
- 18FM, 6AM Preset Stations
- MP3/WMA/WAV/AAC/FLAC Playback
UPC Code 046838002380
These CS-Series 5-1/4-inch Coaxial Speakers are the perfect way to upgrade your factory speakers. CS-Series Coaxials deliver remarkable performance and ultra-clean bass with a heavy-duty motor/magnet structure not found in stock speakers. The stamped-steel framework supports a rigid polypropylene cone with EVC technology for the best sonic quality. Using zero-protrusion PEI tweeters with neodymium magnets, you get the clarity you need without interfering with factory grilles. These CS speakers work best with 75 watts of recommended power.
General Features:
- 2-Way Coaxial Design
- 3.4 Ohm DC Resistance
- 225W Peak Power
- 75W RMS
- 90dB Sensitivity
- 45-20kHz Frequency Range
- 1/4" Top Mount Depth
- 1-3/4" Bottom Mount Depth
- 4-1/2" Mounting Hole Diameter
- Fits nearly every car made
- Zero-protrusion tweeters to fit nearly any factory depth
- Woofer EVC™ (Extended Voice Coil) tech assists with precise linear excursion
- UV-treated poly-foam surround resists heat or direct sunlight
- Large woofer magnet in a heavy-duty motor for ultra-clean bass
- PEI-tweeter construction provides superb clarity
- Neodymium tweeter magnets allow for increased volume in high frequencies
- Steel mesh grilles included for speaker protection
UPC Code 713034088356
This Infinity Primus 6002A 2-Channel amplifier is a result of arduous testing and quality control. This amplifier features an input level control adjusts input sensitivity. When low level inputs are used, this control can adjust the input between 200mVrms and 5.0Vrms. When high level inputs are used, the control adjusts the input between 0.5Vrms and 15Vrms. Black with grooved center panel, polished badge, black painted end panels and bottom, this Infinity amplifier will not only enhance your vehicle's sound system, but it will also add a classy, visual flair. The Primus amplifier has on-board circuitry to protect them from shorts, temperature, overvoltage and undervoltage. An LED indicator is included on all four models to let you know when one of these conditions exists. Infinity takes its craft seriously and wants every consumer to have a world-class experience that lasts and lasts!
General Features
- 2-Channel Car Amplifier
- Preamp and speaker-level inputs
- Extruded Heatsink
- Low- and High-Level Inputs
- Switchable Bass EQ
- Onboard Active Crossover
- Full Conventional Protection Suite (OCP, OTP, OVP, UVP, DC)
- Fuse rating: 20A x 1
- 60 watts RMS x 2 at 4 ohms: 70 watts RMS x 2 at 2 ohms
- 140 watts RMS x 1 in bridged mode: 4-ohm stable in bridged mode
- Variable high/low-pass filters: 32-320 Hz, 12 dB/octave
- Variable bass boost: 0-12 dB at 45 Hz
UPC Code 050667373313
This Kicker 8 Gauge Power Amplifier Wiring Kit includes all the necessary hardware and wire to power one amplifier and is designed specifically for car audio systems up to 1000 watts. The included premium power/ground cable is made from 100% oxygen-free copper and is true-to-gauge for ultimate power transfer.
This PK8 power amp kit includes 17-feet of 8 Gauge power cable, 2-feet of 8 Gauge ground cable, 17-feet of 16 Gauge remote turn-on wire, 2-channel RCA cable, Maxi Fuse holder, 60 Amp fuse and more. KICKER® amp power kits feature top-quality Hyper-Flex™ power, ground and turn-on cables. A heavy-duty AFS fuse holder, fuse, terminals and zip ties come in the kit as well. One additional year of amplifier warranty is included if purchased with a KICKER amp.
AMP KIT
- 8 Gauge OFC Power Amplifier Installation Kit
- Designed specifically for car audio systems up to 1000 watts
- Premium power and ground wire provides optimal power transfer
- Made from 100% oxygen-free copper for a pure uninterrupted transfer of power
- Includes 2-channel RCA interconnect cables for the audio signal connection from the receiver to the amplifier
UPC Code
Enrocks EHDRAB98-13 allows you to install a single din receiver into your Harley Touring Bike. The wire harness is included with the dash kit to make wiring more convenient.
General Features:
- Single DIN radio provision
- For Harley Davidson (FL models with fairings) Touring 1998-2013
- Gapless fit between the dash and the kit
UPC Code 728120484431
The BC-HDSWC-WR Harley-Davidson Handlebar Control allows installers to replace the radio in a motorcycle, while retaining the use of the factory handlebar audio controls. This easy-to-install interface uses a patented Auto-Detect system to configure itself for the specific motorcycle application and aftermarket radio being installed. The interface provides wires for front speakers, constant power, switched power and ground, and includes a water-resistant enclosure. This product works with the 95-HDIF2 Harley-Davidson Road Glide FLT/Sharknose fairing (sold separately). It can be made to work with all models by pairing with Metra’s BC-9725 Amp Bypass Harness.
General Features:
- Retains the factory handlebar audio controls
- Auto-Detect configures itself for the specific motorcycle application and aftermarket radio
- Comes with a plug-n-play harness in a water-resistant case
- Provides wires for speakers, constant power, switched power and ground
- Use the BC-9711 to retain rear speakers
- This part number replaces the HD-ASWC-1
Note:
- Fits Harley-Davidson FLH & FLT 1998-2013 (FL models with a fairing)
- Must be without factory amplifier, 2 speaker systems only
UPC Code 086429415762
Protect your new radio from the dirt and weather found on the open road with this handy Radio Shield. The cover's frame fits in your bike's single-DIN opening, and you can then push the cover over your receiver. A unique O-ring seals the cover tightly around your receiver, so you can stop worrying about dust and water getting into the electronics.
UPC Code 810126530271
Enrocks EHDSA98-13 brackets will allow you to install select 6.5" or 6.75" speakers in the factory speaker openings of select 1998 - 2013 Harley Davison Bikes.
General Features:
- 6-1/2" - 6-3/4" Speaker Adapter Plate
- For 1998-2013 (FL models with fairings) Harley Davidson Touring
- Gapless fit between the speaker and the kit
- High-grade ABS plastic construction
- Color: Black
UPC Code 728120484486
