JVC KD-R690S CD Stereo Receiver, 2x 6.5" Speakers, Amp, Harley 98-13 Accessories
JVC KD-X38MBS marine digital media receiver is outdoor-ready, thanks to a conformal-coated circuit board that resists moisture damage. It's white-background display cuts through glare and makes this receiver ideal for out door and open-top vehicles. Also features built-in Bluetooth, an option for satellite radio, and plenty of connections for your digital devices, you'll have lots of music options on the road, trail, or water.
General Features:
- AUX/USB Inputs
- MOSFET (22 watts RMS/50 peak x 4 channels)
- Backlit Display
- Conformal Coated PCB
- 13-Band EQ
- 2-Zone Variable-Color Illumination
- JVC Remote App Compatibility
- 4.0V High-Voltage 3 Pre-Outs
- Space Enhancement
- Sound Response
- Sound Lift
- Audio Streaming Control
- iPhone Bluetooth Automatic Pairing
- 2-Line VA LCD Display
- High Current 1.5A Charging
- Satellite Radio Ready
- Wired Remote Control (Optional)
- Steering Wheel Remote Control Ready
- AM/FM Tuner
- 18FM, 6AM Preset Stations
- MP3/WMA/WAV/AAC/FLAC Playback
- Bluetooth Built-In
UPC Code 046838002410
Protect your new radio from the dirt and weather found on the open road with this handy Radio Shield. The cover's frame fits in your bike's single-DIN opening, and you can then push the cover over your receiver. A unique O-ring seals the cover tightly around your receiver, so you can stop worrying about dust and water getting into the electronics.
UPC Code 810126530271
These CS-Series 6-1/2-inch Coaxial Speakers are the perfect way to upgrade your factory speakers.
CS-Series Coaxials deliver remarkable performance and ultra-clean bass with a heavy-duty motor/magnet structure not found in stock speakers. The stamped-steel framework supports a rigid polypropylene cone with EVC (Extended Voice Coil) technology for the best sonic quality. Using zero-protrusion PEI tweeters with neodymium magnets, you get the clarity you need without interfering with factory grilles.
These CS speakers work best with 100 watts of recommended power.
General Features:
- 6.5" 2-Way Design Speaker
- 300W Peak Power
- 100W RMS Continuous Power
- 90dB Sensitivity
- 40-20kHz Effective Frequency Range
- Zero-protrusion tweeters to fit nearly any factory depth
- UV-treated poly-foam surround resists heat or direct sunlight
- Large woofer magnet in a heavy-duty motor for ultra-clean bass
- PEI-tweeter construction provides superb clarity
- Neodymium tweeter magnets allow for increased volume in high frequencies
- Steel mesh grilles included for speaker protection
UPC Code 713034088363
Enrock's EEA720.4 4-channel amplifier was designed compact yet rugged. The outdoors can be a tough spot for audio gear so Enrock considered the salt, spray and sunlight when designing this Class D amplifier. With 45 watts RMS per channel this amplifier will drive your speakers no matter the application you are using it for. It’s compact enough for a bike and powerful enough for a car. You’ll have no trouble hearing your tunes over the wind and waves with this powerful amplifier.
Weather Resistant for Marine Application
Durable and Powerful for Automotive Use
Compact and rugged for Off-Road Installation
This compact amplifier will fit into a storage compartment on a boat, motorcycle, ATV, or car with optimal performance, despite its size. Should you decide to add a pair of subwoofers you can bridge this amp to a 2-channel mode and send 120 watts to each subwoofer, or switch to 3-channel mode to get a pair of speakers and a subwoofer. With high-pass and low-pass filters, plus bass boost, you can customize your sound output just the way you take your tunes.
EEA720.4 GENERAL FEATURES:
- 4-channel marine/powersports/ car amplifier
- 45 watts RMS x 4 at 4 ohms (60 watts RMS x 4 at 2 ohms)
- 120 watts x 2 bridged at 4 ohms
- Class D amp technology
- 720 Watts Peak Power
- variable high- and low-pass filters
- Sealed Chassis for use in harsh environments
- Ultra-efficient full range class D operation
- Built-in Crossover- maximum flexibility
- 2 or 4 channel input
- Signal to noise ratio 97db
- High pass filter 120Hz/80Hz
- Input range: 200mV-10V
- Frequency Response: 20Hz to 20KHz
UPC Code 728120454069
Enrocks EHDRAB98-13 allows you to install a single din receiver into your Harley Touring Bike. The wire harness is included with the dash kit to make wiring more convenient.
General Features:
- Single DIN radio provision
- For Harley Davidson (FL models with fairings) Touring 1998-2013
- Gapless fit between the dash and the kit
UPC Code 728120484431
The BC-HDSWC-WR Harley-Davidson Handlebar Control allows installers to replace the radio in a motorcycle, while retaining the use of the factory handlebar audio controls. This easy-to-install interface uses a patented Auto-Detect system to configure itself for the specific motorcycle application and aftermarket radio being installed. The interface provides wires for front speakers, constant power, switched power and ground, and includes a water-resistant enclosure. This product works with the 95-HDIF2 Harley-Davidson Road Glide FLT/Sharknose fairing (sold separately). It can be made to work with all models by pairing with Metra’s BC-9725 Amp Bypass Harness.
General Features:
- Retains the factory handlebar audio controls
- Auto-Detect configures itself for the specific motorcycle application and aftermarket radio
- Comes with a plug-n-play harness in a water-resistant case
- Provides wires for speakers, constant power, switched power and ground
- Use the BC-9711 to retain rear speakers
- This part number replaces the HD-ASWC-1
Note:
- Fits Harley-Davidson FLH & FLT 1998-2013 (FL models with a fairing)
- Must be without factory amplifier, 2 speaker systems only
UPC Code 086429415762
Enrocks EHDSA98-13 brackets will allow you to install select 6 1/2" or 6-3/4" speakers in the factory speaker openings of select 1998 - 2013 Harley Davison Bikes.
General Features:
- 6-1/2" - 6-3/4" Speaker Adapter Plate
- For 1998-2013 (FL models with fairings) Harley Davidson Touring
- Gapless fit between the speaker and the kit
- High-grade ABS plastic construction
- Color: Black
UPC Code 728120484486
This rugged Enrock EKMR1 marine soft wire universal antenna gives you performance, durability and plenty of placement options. The flexible wire makes it the perfect hideaway antenna, while the corrosion-resistant rubber exterior confirms that it will stand up to salt and spray. The 22inch long flexible wire will make mounting it a breeze.
General Features:
- 22" AM/FM Marine Antenna
- Improves Radio reception
UPC Code 799861388630
