JBL Marine Bluetooth AM/FM/WB Radio, Remote, Extension, 2x 8" Speakers
The JBL Wake Series Marine digital media receiver features a weather-resistant design, built-in amplifier, 4" color LCD display, built in bluetooth, rear AUX and USB ports, AM/FM/Weather Band Tuner, and NMEA2000 Ready.
Receiver:
- 4" LCD Screen
- Rotary encoder
- AM/FM/WB
- Aux input
- USB input/charging
- 4x55W Peak @4ohms
- 2 ohm stable
- Three zone line level differential outputs with L,R, Sub for each zone.
- NMEA2000 Ready.
- Adjustable dimming/illumination.
- Faceplate width 3” (76.2mm)
- Faceplate length 6 7/16” (163.6mm)
- Faceplate thickness 7/16” (11.2mm)
- Chassis width 5” (127mm)
- Chassis length 4 1/4” (108mm)
- Chassis height 1 15/16” (49.3mm)
- Wired Remote Ready (compatible with MIL-REM80 and INFREM1)
UPC Code 648701264514
These JBL Stage Marine Speakers are ready to take on your next outdoor adventure. These fully marinized speakers not only deliver JBL sound, but they bring the sound to life. Engineered to withstand sun, salt, sea spray and wash downs, they feature sealed motor structure, UV resistant one-piece cast-polymer baskets and rubber surrounds. The polypropyelene cone and balanced dome tweeter provide great bass, smooth highs and lots of output to ensure every note can be heard loud and clear.
General Features:
- IPx5 Rated
- Outdoor Performance
- Marine Design
- Balanced Dome Tweeters
- Rubber Surrounds
- Individually Voiced
- Harman Standard Reliability Testing
- Power Handling: 125Wrms, 375W peak
- Sensitivity (@ 2.83V): 90dB
- Frequency Response: 50Hz – 20kHz
- Nominal Impedance: 4 ohms
What's in the box?:
- 2 x Stage Marine 8" Speakers with attached grilles
- 1 x Stainless steel mounting hardware
- 1 x Drill bit for easy installation
- 1 x Foam gasket
- 2 x Speaker pigtail harness
- 2 x JBL sticker
- 1 x Quick Start Guide
UPC Code 050036383134
This all weather wired remote provides the ability to control key source unit functions. Add localized control, with the most common area being the transom, quickly and easily! Arrives standard with 18" of cable so we suggest the REX20-6 extension for longer cabling needs. (REX20-6 is 20').
General Features:
Compatible with the following Infinity source units
- INFPRV315.2
- REFPRV415
- KAPPRV515
- KAPMBB500
Dimensions:
- 4 1/8" L x 2 1/4" W x 1/2" (thickness once installed)
- 1 1/4" hole required for installation
UPC Code 648701578017
The REX20-6 extension cable gives you more placement options when you're installing select marine receivers and remotes. It features a 6-conductor plug, and if you have a long run to deal with, you can connect two of these extension harnesses for a total length of 40'.
Extension Cable
- 20-foot extension cable
- 6-conductor plug
- For use with REM-20,21,25,30,50 and 70
UPC Code 648701212003
