JBL PRV-275 Marine Bluetooth USB/AUX WB AM/FM Radio Gauge Style Digital Media Receiver, 8x 6.5" 225W Max High-Performance White Speakers, 2x 4-Channel Amplifier W/2x Kit + Splitter, Antenna, Wire

---

This JBL PRV-275 marine gauge-style digital media receiver is the perfect marine-grade receiver to take your vehicle's entertainment system to the next level. This receiver packs an array of features in its compact water-tight design, including built-in Bluetooth,  AUX/USB inputs, and a built-in amp. This receiver won't play your CDs, but it has been equipped to take to all of your most modern devices, from iOS handheld devices to your Android phone.

General Features:

• 2.75" Color TFT Display
• Marine Gauge Style Digital Media Receiver
• AM/FM/WB (Weather Band)
• Bluetooth Audio Streaming with ID tag
• 2 Ohm Stable
• Built-In Amplifier (50 peak x 4 channels)
• Waterproof Faceplate
• USB input and control-for USB drives onlyAuxiliary input
• 3 pair of RCA output including subwoofer output
• Video input
• Wired remote option

UPC Code 050036347273

---

Infinity's Marine speakers are constructed of solid, weather-resistant material, put together in the most careful, precise manner will provide you with a musical and listening experience that will keep you attached to your boat. The 6.5" speakers feature a polypropylene woofer cone bonded to a tough, UV-resistant rubber surround, which delivers full bass response and does a superb job deflecting sunlight and moisture. The corrosion-proof, cast-polymer basket resists deterioration from salt, moisture, and UV rays, while the stylish non-removable grille is specially meant for retaining its shiny chrome finish. The grille-mounted 1" tweeter offers excellent high-frequency projection. Infinity seals the front of the woofer cone along with the speaker's magnet structure, serving as extra protection against moisture. Stainless steel mounting hardware is not included.

6.5" Speaker:

• 6.5" 2-way Marine speakers
• Power range: 75 watts RMS / 225 Watts Peak
• Polypropylene woofer cone with UV-resistant rubber surround
• Grille-mounted 1" polypropylene semi-dome tweeter.
• Frequency Response: 50-20,000 Hz.
• Sensitivity: 92 dB

UPC Code 050667371890

---

Infinity's marine 3004A amplifier will add plenty of muscle to your music without breaking a sweat, and it'll look good doing it. This 4-channel powerhouse delivers 75 watts RMS to each of the front and rear speakers in your boat. Into planning ahead? You could use this amp in 2-channel mode now to drive a couple subwoofers with 200 watts RMS each, then reassign it to your front and rear speakers when you get a bigger sub amp. Speaker-level inputs allow this amplifier to work in almost any system, even if you're keeping your marine's factory radio. You can use the separate high and low pass filters on the front and rear channels to maximize the performance of your speakers or subs.

General Features:

• 4 Channel Marine Amplifier
• 75 watts RMS x 4 at 4 ohms
• 100 watts RMS x 4 at 2 ohms
• 200 watts RMS x 2 at 4 ohms in bridged mode (4-ohm stable in bridged mode)
• Class H amp technology
• Variable high and low-pass filters on front and rear channels
• Preamp and speaker-level inputs
• Preamp outputs
• Fuse rating: 30A x 2
• 8-gauge power and ground leads recommended
• Wiring and hardware not included

UPC Code 050667380106

---

Power your marine amplifier with a wiring kit that can withstand the harsh environment and still deliver full sound performance. Fully tinned wiring ensures that these amp kits won’t corrode or oxidize and turn green after a season on the water. Oxygen-free copper provides a reliable connection with maximum conductivity. By using 100% virgin copper the tin won’t flake off, something commonly seen when using recycled copper materials. While it is also common to tin just the tips of the wire for cost savings, this practice does not actually provide any benefits. Metra’s amp kits use fully tinned copper wire from top to bottom that can withstand a harsh marine environment and salty air. The ignition-protected 50-amp circuit breaker is IP67 rated with stainless steel connection points for corrosion resistance

Amplifier Wiring Kit:

• Marine compliant amplifier wiring kit
• Fully tinned 100% virgin copper wire
• BC5W2 marine compliant jacket
• 50-amp marine circuit breaker is rated IP67 with stainless steel connection points for corrosion resistance
• Easy to solder tinned wiring
• Connectors, ring terminals, and wire ties included

What’s in the box:

• (1) 8-gauge tinned oxygen-free copper side-by-side red power and yellow ground wire (10ft.)
• (1) 18-gauge tinned oxygen-free copper blue remote turn-on wire (18ft.)
• (2) 8-gauge ring terminal with shrink tube and logo, pre-terminated on each end of the 2ft. red wire
• (1) 8-gauge ring terminal with shrink tube and logo, pre-terminated on 8ft. red wire
• (1) 8-gauge ring terminal with shrink tube and logo, pre-terminated on yellow wire
• (1) Ignition protected circuit breaker (50-amp)

UPC Code 086429416820

---

A ground-breaking virgin-PVC, Hyper-Flex insulation and multi-strand construction allows you to bend, twist, and contort the cable in any way imaginable for an ultimate installation experience while delivering maximum current flow; remains ultra-flexible under hot or cold temperature extremes; transfers the cleanest audio signal possible by using tightly twisted, silver-tinned OFC copper conductors; zip line to easily remove outer insulation.

Speaker Wire:

• 20 Feet
• 16 Gauge
• Silver-tinned OFC (oxygen-free copper)

UPC Code 632016086404

---

The Audiopipe signal splitter (SPLIT3003RCA) accepts 3 RCA inputs from a head unit: Front, Rear, and Subwoofer. Provides 3 amplified outputs for each input: 3 front outputs, 3 rear outputs, and 3 subwoofer outputs.

SPLIT-3003RCA AUDIO SIGNAL SPLITTER FEATURES:

• INPUT IMPEDANCE: 47K Ohms
• INPUT SENSITIVITY: 260mV
• S/N RATIO: >95dB -
• OUTPUT LEVEL (10KHz): >1V (1KHz)
• OUTPUT IMPEDANCE: 1K Ohms
• CHANNEL RESOLUTION: >60dB
• HARMONICS DISTORTION: 0.009%
• FREQUENCY RESPONCE: 20-20KHz -
• OUTPUT GAIN: 12Db

UPC Code 784644417706

---

The antenna includes a flexible mast for durability, along with a 180 swivel base for increased mounting options. It is corrosion resistant and includes 45 inch cable. Flexible mast. Angled mounting options allow you to install the 20W antenna in the most convenient locations. Corrosion resistant for the marine environment.

General Features:

• Flexible Mast AM/FM Marine Antenna
• 180 degrees Swivel base for maximum mobility and 45 inch cable
• Angled mounting options allow installation of the antenna in the most convenient locations

UPC Code 799861390336