JBL PRV-275 Receiver, 2 x 6.5" Speakers (Bulk Packaging), Antenna, Accessories
This JBL PRV-275 marine gauge-style digital media receiver is the perfect marine-grade receiver to take your vehicle's entertainment system to the next level. This receiver packs an array of features in its compact water-tight design, including built-in Bluetooth, an LCD display, AUX/USB inputs, and a built-in amp. This receiver won't play your CDs, but it has been equipped to take to all of your most modern devices, from iOS handheld devices to your Android phone.
General Features:
- Marine Digital Media Receiver
- Does not play CDs
- Built-In Bluetooth for Music Streaming
- 2.75" Color LCD Display
- Built-In Amp (20 watts x 4 RMS/45 peak x 4 channels)
- Marine-Rated Watertight Face
- Rotary Encoder Knob
- Fits Into Standard Tachometer Opening
- Rear USB/AUX Innputs
- 3 Sets of RCA Preamp Outputs
- Face Diameter: 4-1/8"
- Required Cutout: 3-1/2" (diameter)
UPC Code 648701262756
The JBL 6.5" Marine Series Speakers are ready to take on anything Mother Nature throws your way. With Plus One woofers and balanced dome tweeters, you'll hear the clarity of your audio above the raucous sounds of the sea. Designed to take on the sun, sea spray and scrub downs, these powerful speakers feature waterproof motor structures, a one-piece cast-polymer basket, a sealed magnet, and rubber surrounds. Polypropylene cones provide more overall speaker-cone area than other cones in its class - the result is higher sensitivity, increased low-frequency output and greater tonal character. The balanced, weather resistant dome tweeters deliver a smooth high-frequency response and increased power handling for highs and mids, which equates to more lifelike sound from vocals, cymbals, brass instruments and pianos. Designed for the durability against the elements, the one-piece polymer basket is designed to stand the test of time, even after long exposure to the sun and salt. Rubber surrounds offer superior edge protection and are much more reliable than foam. And a grille-mounted tweeter allows the front of the woofer cone to be sealed, protecting the motor structure from sea spray.
General Features:
- 6.5" Marine Series Speakers
- 150Watts peak Power Handling
- 4Ohms Impedance
- 90dB Sensitivity
- Open Environment Tested (UV, Water, Heat, Salt)
- Polypropylene Cone (Increased Low Freq. Output)
- Weather Resistant Tweeters
- Grille-Mounted Tweeter (Frontal Protection)
- Sealed Magnet
- Rubber Surrounds
UPC Code
The antenna includes a flexible mast for durability, along with a 180 swivel base for increased mounting options. It is corrosion resistant and includes 45 inch cable. Flexible mast. Angled mounting options allow you to install the 20B antenna in the most convenient locations. Corrosion resistant for the marine environment.
General Features:
- Marine AM/FM antenna
- Flexible Mast AM/FM Marine Antenna
- 180 degrees Swivel base for maximum mobility and 45 inch cable
- Designed for marine use only
- Angled mounting options allow installation of the antenna in the most convenient locations
- Corrosion resistant for the marine environment
UPC Code 799861390343
Enrock's 16-Gauge Speaker Wire is a smart solution to your audio needs since most speakers do not include speaker wires.This wire comes in 50' Feet to give you convenient installation and pure sound quality enhancement. The cable is tinned and oxygen free copper (OFC) to deliver high-quality sound without any transmission loss. Marine grade speaker wiring made simple. Just use high quality marine duplex wiring with it's fine stranded tin plated copper to resist corrosion.
The added benefit of an overall jacket for added protection.
Don't settle for untinned speaker wire where the copper will turn black!
Get long lasting performance from a quality made cable that is designed to last.
General Specifications:
- Connects audio speakers to your A/V receiver or amplifier.
- Marine grade tinned wire
- Oxygen Free Copper (OFC)
- Features a plastic jacket around the speaker wire
- The white line one one side to mark polarity
- Wrapped around a hard plastic spool
- Length: 50 Feet.
- Gauge: 16.
UPC Code 728120479901
The Universal USB/3.5mm Auxiliary Interface Mount and Cable measures 10 feet in length and will convert your AUX inputs to USB, and is UV resistant.
General Features:
- UV-resistant
- USB to RCA 10" pass-through extension cable
- 1.5" through-hole mount
- Dustproof water-resistant rubber cover
- Use with any radio with rear USB/RCA inputs
- Cable Length: 3m (10ft)
UPC Code 799861390145
