Marine Bluetooth Radio, 8x 6.5" Speaker, 2x Amp w/Kit, Splitter, Antenna (Black)
JBL JAM3000 marine gauge style audio receiver is designed for multi-element environments engineered to meet the demands in extreme environments featuring bluetooth connectivity, AM/FM radio tuner, built in amplifier, USB port for audio playback, 2.8-inch display screen and is IP66 waterproof rated.
General Features:
- 2.8” Monochrome LCD Display
- 15 Watts x 4 Channel @ 4ohm
- Supports multiple audio sources
- Bluetooth, USB, AM/FM
- Audio output - RCA & Speaker level
- IP66 Marine Rated
- RMS Power Output 15Wx4
- 3Ch/2V Pre-out
- Eco-friendly Packaging
- Mounting options: Front & Rear
What's In The Box:
- 1 x radio
- 1 x accessory harness
- 1 x mounting bracket
- 1 x foam gasket for sealing at rear mounting surface
- 2 x foam strip gasket for sealing at front mounting surface
- 4 x mounting screws
- 2 x mounting bolts for top mount
- 4 x flanged nuts
- 2 x lock washers
- 1 x owner’s manual
- 1 x safety sheet
UPC Code 050036399432
Infinity's Marine speakers are constructed of solid, weather-resistant material, put together in the most careful, precise manner will provide you with a musical and listening experience that will keep you attached to your boat.
The Infinity 622M is the new 2016 replacement of the 612M/INF612M. The 6-1/2" speakers feature a polypropylene woofer cone bonded to a tough, UV-resistant rubber surround, which delivers full bass response and does a superb job deflecting sunlight and moisture. The corrosion-proof, cast-polymer basket resists deterioration from salt, moisture, and UV rays, while the stylish non-removable grille is specially meant for retaining its shiny chrome finish.
The grille-mounted 1" tweeter offers excellent high-frequency projection. Infinity seals the front of the woofer cone along with the speaker's magnet structure, serving as extra protection against moisture. Stainless steel mounting hardware is not included.
General Features:
- 2-way 6-1/2" marine speaker
- Power range: 2-75 watts RMS = 225 watts peak power.
- Polypropylene woofer cone with UV-resistant rubber surround.
- Grille-mounted 1" polypropylene semi-dome tweeter.
- Cast-polymer basket.
- Frequency response: 50-20,000 Hz.
- Sensitivity: 92 dB @ 2.83V.
- Top-mount depth: 2-5/8".
- Screws and hardware not included.
UPC Code 050667368951
Infinity's marine 3004A amplifier will add plenty of muscle to your music without breaking a sweat, and it'll look good doing it. This 4-channel powerhouse delivers 75 watts RMS to each of the front and rear speakers in your boat. Into planning ahead? You could use this amp in 2-channel mode now to drive a couple subwoofers with 200 watts RMS each, then reassign it to your front and rear speakers when you get a bigger sub amp. Speaker-level inputs allow this amplifier to work in almost any system, even if you're keeping your marine's factory radio. You can use the separate high and low pass filters on the front and rear channels to maximize the performance of your speakers or subs.
General Features:
- 4 Channel Marine Amplifier
- 75 watts RMS x 4 at 4 ohms
- 100 watts RMS x 4 at 2 ohms
- 200 watts RMS x 2 at 4 ohms in bridged mode (4-ohm stable in bridged mode)
- Class H amp technology
- Variable high and low-pass filters on front and rear channels
- Preamp and speaker-level inputs
- Preamp outputs
- Fuse rating: 30A x 2
- 8-gauge power and ground leads recommended
- Wiring and hardware not included
UPC Code 050667380106
The Power Sport Motorcycle Universal Amplifier Wiring Kit includes the following 6 foot length of red and black T-Spec OFC power and ground wire with a T-Spec V8MANL fuse holder, 60 amp fuse protected by a black nylon braid, Pre-terminated ring terminals, (2) 4 foot pieces of 16 gauge OFC speaker wire protected by black nylon mesh and 4"x6" hook and loop mounting pad for micro-amplifiers.
Amplifier Wiring Kit:
- Designed tor motorcycles
- 6 feet of red and black T-Spec OFC power and ground wire with a T-Spec V8MANL fuse holder and 60 amp fuse protected by a black nylon braid
- Pre-terminated ring terminals make connections to the battery simple
- Two 4 foot pieces of 16 gauge OFC speaker wire protected by black nylon mesh makes upgrading the factory speaker wires or adding new speakers a smart choice
- Upgrading Harmon Kardon System – Two 47-ohm .5 watt resistors to keep the factory radio outputs active
- All the necessary installation hardware is included along wtth a 4 × 6 inch hook and loop mounting pad for micro-amplifiers to hold the amplifier securely in place
UPC Code 086429332267
The Audiopipe signal splitter (SPLIT3003RCA) accepts 3 RCA inputs from a head unit: Front, Rear, and Subwoofer. Provides 3 amplified outputs for each input: 3 front outputs, 3 rear outputs, and 3 subwoofer outputs.
SPLIT-3003RCA AUDIO SIGNAL SPLITTER FEATURES:
- INPUT IMPEDANCE: 47K Ohms
- INPUT SENSITIVITY: 260mV
- S/N RATIO: >95dB -
- OUTPUT LEVEL (10KHz): >1V (1KHz)
- OUTPUT IMPEDANCE: 1K Ohms
- CHANNEL RESOLUTION: >60dB
- HARMONICS DISTORTION: 0.009%
- FREQUENCY RESPONCE: 20-20KHz -
- OUTPUT GAIN: 12Db
UPC Code 784644417706
The antenna includes a flexible mast for durability, along with a 180 swivel base for mounting options. Angled mounting options allow you to install the antenna in the most convenient locations. Includes a 45 inch cable. Corrosion resistant for the marine environment.
Antenna:
- Flexible Mast AM/FM Marine Antenna
- 180 degrees Swivel base for maximum mobility and 45 inch cable
- Angled mounting options allow installation of the antenna in the most convenient locations
UPC Code 799861390343