JBL Marine Gauge Hole Mount Bluetooth AM/FM Radio Receiver, 8x 6.5" 225 Watt Max 2-Way Multicolor LED Black Speakers, 2x 4-Channel Amplifier w/2x Wiring Kit, Audio Splitter, Antenna (Black)

---

JBL JAM3000 marine gauge style audio receiver is designed for multi-element environments engineered to meet the demands in extreme environments featuring bluetooth connectivity, AM/FM radio tuner, built in amplifier, USB port for audio playback, 2.8-inch display screen and is IP66 waterproof rated.

General Features:

• 2.8” Monochrome LCD Display
• 15 Watts x 4 Channel @ 4ohm
• Supports multiple audio sources
• Bluetooth, USB, AM/FM
• Audio output - RCA & Speaker level
• IP66 Marine Rated
• RMS Power Output 15Wx4
• 3Ch/2V Pre-out
• Eco-friendly Packaging
• Mounting options: Front & Rear

What's In The Box:

• 1 x radio
• 1 x accessory harness
• 1 x mounting bracket
• 1 x foam gasket for sealing at rear mounting surface
• 2 x foam strip gasket for sealing at front mounting surface
• 4 x mounting screws
• 2 x mounting bolts for top mount
• 4 x flanged nuts
• 2 x lock washers
• 1 x owner’s manual
• 1 x safety sheet

UPC Code 050036399432

---

These JBL Club Marine MS65LB 6.5" Speakers w/ the RGB Lighting Option are ready to take on your next outdoor adventure. These fully marinized speakers not only deliver JBL sound, but also feature RGB lighting to bring the sound to life. Engineered to withstand sun, salt, sea spray and wash downs, they feature sealed motor structure, UV resistant one-piece cast-polymer baskets, a sealed magnet and rubber surrounds. The polypropylene cone and balanced dome tweeter provide great bass, smooth highs and lots of output to ensure every note can be heard loud and clear.

 

General Features:

• 6.5" 2-Way Speakers
• Marine-Grade IPx5 Rated
• Power Handling: 75W RMS, 225W Peak
• Frequency Response: 50Hz-20kHz
• Impedance: 4 Ohms
• Harman Standard Reliability Testing
• Multi-Color RGB LED Lighting
• One-piece Polymer Basket
• Rubber Surrounds
• Foam Gasket
• Bridge mounted (grille mounted) tweeters
• Balanced Dome Tweeters
• Individually Voiced
• Stainless Steel Mounting Hardware

UPC Code 050036346252

---

The JBL Marine A754 4-channel amplifier delivers a powerful 75-Watts RMS to each of the front and rear speakers in your boat. You can also bridge the amp to 2-channel mode to drive a couple subs with 200 watts RMS or 3-channel mode to drive both a pair of full range speakers and a subwoofer. Speaker-level inputs allow this amplifier to integrate into almost any system, even one using your Marine’s factory radio. Separate high-pass and low-pass crossovers on the front and rear channels allow you dial in the perfect roll off to best suit speaker placement and cabin acoustics.

General Features:

• 4 channel Marine amplifier
• 75 watts RMS x 4 at 4 ohms (100 watts RMS x 4 at 2 ohms)
• 200 watts RMS x 2 at 4 ohms in bridged mode (4-ohm stable in bridged mode)
• Variable high- and low-pass filters (32-320 Hz, 12 dB/octave) on front and rear channels
• Preamp and speaker-level inputs
• Preamp outputs
• Fuse rating: 30A x 2
• 8-gauge power and ground leads recommended — wiring and hardware not included with amplifier
• WxHxD=320mm x 51.3mm x 180mm WxHxD=12-5/8” x 2-1/16” x 7-1/8”

UPC Code 050036396943

---

The Power Sport Motorcycle Universal Amplifier Wiring Kit includes the following 6 foot length of red and black T-Spec OFC power and ground wire with a T-Spec V8MANL fuse holder, 60 amp fuse protected by a black nylon braid, Pre-terminated ring terminals, (2) 4 foot pieces of 16 gauge OFC speaker wire protected by black nylon mesh and 4"x6" hook and loop mounting pad for micro-amplifiers.

Amplifier Wiring Kit:

• Designed tor motorcycles
• 6 feet of red and black T-Spec OFC power and ground wire with a T-Spec V8MANL fuse holder and 60 amp fuse protected by a black nylon braid
• Pre-terminated ring terminals make connections to the battery simple
• Two 4 foot pieces of 16 gauge OFC speaker wire protected by black nylon mesh makes upgrading the factory speaker wires or adding new speakers a smart choice
• Upgrading Harmon Kardon System – Two 47-ohm .5 watt resistors to keep the factory radio outputs active
• All the necessary installation hardware is included along wtth a 4 × 6 inch hook and loop mounting pad for micro-amplifiers to hold the amplifier securely in place

UPC Code 086429332267

---

The Audiopipe signal splitter (SPLIT3003RCA) accepts 3 RCA inputs from a head unit: Front, Rear, and Subwoofer. Provides 3 amplified outputs for each input: 3 front outputs, 3 rear outputs, and 3 subwoofer outputs.

SPLIT-3003RCA AUDIO SIGNAL SPLITTER FEATURES:

• INPUT IMPEDANCE: 47K Ohms
• INPUT SENSITIVITY: 260mV
• S/N RATIO: >95dB -
• OUTPUT LEVEL (10KHz): >1V (1KHz)
• OUTPUT IMPEDANCE: 1K Ohms
• CHANNEL RESOLUTION: >60dB
• HARMONICS DISTORTION: 0.009%
• FREQUENCY RESPONCE: 20-20KHz -
• OUTPUT GAIN: 12Db

UPC Code 784644417706

---

The antenna includes a flexible mast for durability, along with a 180 swivel base for mounting options. Angled mounting options allow you to install the antenna in the most convenient locations. Includes a 45 inch cable. Corrosion resistant for the marine environment.

Antenna:

• Flexible Mast AM/FM Marine Antenna
• 180 degrees Swivel base for maximum mobility and 45 inch cable
• Angled mounting options allow installation of the antenna in the most convenient locations

UPC Code 799861390343