JBL Marine Gauge Hole Mount Bluetooth AM/FM Radio Receiver, 8x 6.5" 225 Watt 2-Way Multicolor LED Titanium Speakers, 2x 4-Channel Amplifier w/2x Wiring Kit, Audio Splitter, Antenna (White)

---

JBL JAM3000 marine gauge style audio receiver is designed for multi-element environments engineered to meet the demands in extreme environments featuring bluetooth connectivity, AM/FM radio tuner, built in amplifier, USB port for audio playback, 2.8-inch display screen and is IP66 waterproof rated.

General Features:

• 2.8” Monochrome LCD Display
• 15 Watts x 4 Channel @ 4ohm
• Supports multiple audio sources
• Bluetooth, USB, AM/FM
• Audio output - RCA & Speaker level
• IP66 Marine Rated
• RMS Power Output 15Wx4
• 3Ch/2V Pre-out
• Eco-friendly Packaging
• Mounting options: Front & Rear

What's In The Box:

• 1 x radio
• 1 x accessory harness
• 1 x mounting bracket
• 1 x foam gasket for sealing at rear mounting surface
• 2 x foam strip gasket for sealing at front mounting surface
• 4 x mounting screws
• 2 x mounting bolts for top mount
• 4 x flanged nuts
• 2 x lock washers
• 1 x owner’s manual
• 1 x safety sheet

UPC Code 050036399432

---

Infinity Reference Marine Speakers are ready to take on your next outdoor adventure. These fully marinized speakers not only deliver Infinity sound, but they also feature RGB lighting to bring the sound to life. Engineered to withstand sun, salt, sea spray and wash downs, they feature sealed motor structure, UV resistant one-piece cast-polymer baskets, a sealed magnet and rubber surrounds. The polypropyelene cone and balanced dome tweeter provide great bass, smooth highs and lots of output to ensure every note can be heard loud and clear.

General Features:

• 6.5" 2-way Marine audio Multi-Element Speaker (Titanium)
• Seven color multi-color RGB LED lighting,included
• Designed to withstand harsh outdoor environments
• Power Handling 75W RMS, 225W peak
• Sensitivity (@ 2.83V) 92dB
• Frequency Response 50Hz – 20kHz
• Impedance 4 ohms
• IPx5 Rated
• Cosmetic Appeal
• Outdoor Performance
• RGB Lighting
• Marine Design
• Balanced Dome Tweeters
• Designed for the Elements

UPC Code 050667371913

---

Infinity's marine 3004A amplifier will add plenty of muscle to your music without breaking a sweat, and it'll look good doing it. This 4-channel powerhouse delivers 75 watts RMS to each of the front and rear speakers in your boat. Into planning ahead? You could use this amp in 2-channel mode now to drive a couple subwoofers with 200 watts RMS each, then reassign it to your front and rear speakers when you get a bigger sub amp. Speaker-level inputs allow this amplifier to work in almost any system, even if you're keeping your marine's factory radio. You can use the separate high and low pass filters on the front and rear channels to maximize the performance of your speakers or subs.

General Features:

• 4 Channel Marine Amplifier
• 75 watts RMS x 4 at 4 ohms
• 100 watts RMS x 4 at 2 ohms
• 200 watts RMS x 2 at 4 ohms in bridged mode (4-ohm stable in bridged mode)
• Class H amp technology
• Variable high and low-pass filters on front and rear channels
• Preamp and speaker-level inputs
• Preamp outputs
• Fuse rating: 30A x 2
• 8-gauge power and ground leads recommended
• Wiring and hardware not included

UPC Code 050667380106

---

The Power Sport Motorcycle Universal Amplifier Wiring Kit includes the following 6 foot length of red and black T-Spec OFC power and ground wire with a T-Spec V8MANL fuse holder, 60 amp fuse protected by a black nylon braid, Pre-terminated ring terminals, (2) 4 foot pieces of 16 gauge OFC speaker wire protected by black nylon mesh and 4"x6" hook and loop mounting pad for micro-amplifiers.

Amplifier Wiring Kit:

• Designed tor motorcycles
• 6 feet of red and black T-Spec OFC power and ground wire with a T-Spec V8MANL fuse holder and 60 amp fuse protected by a black nylon braid
• Pre-terminated ring terminals make connections to the battery simple
• Two 4 foot pieces of 16 gauge OFC speaker wire protected by black nylon mesh makes upgrading the factory speaker wires or adding new speakers a smart choice
• Upgrading Harmon Kardon System – Two 47-ohm .5 watt resistors to keep the factory radio outputs active
• All the necessary installation hardware is included along wtth a 4 × 6 inch hook and loop mounting pad for micro-amplifiers to hold the amplifier securely in place

UPC Code 086429332267

---

The Audiopipe signal splitter (SPLIT3003RCA) accepts 3 RCA inputs from a head unit: Front, Rear, and Subwoofer. Provides 3 amplified outputs for each input: 3 front outputs, 3 rear outputs, and 3 subwoofer outputs.

SPLIT-3003RCA AUDIO SIGNAL SPLITTER FEATURES:

• INPUT IMPEDANCE: 47K Ohms
• INPUT SENSITIVITY: 260mV
• S/N RATIO: >95dB -
• OUTPUT LEVEL (10KHz): >1V (1KHz)
• OUTPUT IMPEDANCE: 1K Ohms
• CHANNEL RESOLUTION: >60dB
• HARMONICS DISTORTION: 0.009%
• FREQUENCY RESPONCE: 20-20KHz -
• OUTPUT GAIN: 12Db

UPC Code 784644417706

---

The antenna includes a flexible mast for durability, along with a 180 swivel base for increased mounting options. It is corrosion resistant and includes 45 inch cable. Flexible mast. Angled mounting options allow you to install the 20W antenna in the most convenient locations. Corrosion resistant for the marine environment.

General Features:

• Flexible Mast AM/FM Marine Antenna
• 180 degrees Swivel base for maximum mobility and 45 inch cable
• Angled mounting options allow installation of the antenna in the most convenient locations

UPC Code 799861390336