4X Polk 6x9" 450W Car/Boat Speakers,Polk 4-Ch Digital Power Amp,Wiring Kit
JVC CSDR6931 drvn DR Series 6x9" 3-way car speakers features a lightweight carbon mica material providing clear and undistorted reproduction, Hybrid Surround Rubber Coated Cloth with increased mobility enables high efficiency, Balanced Neodymim Tweeter provides detailed high range and smooth mid range. Works best at 70 Watts (500W Max) of recommended power.
General Features:
- 6x9" 3-Way Speakers
- Power Handling Capacity (Peak power) - 500 Watts
- Power Handling Capacity (RMS power) - 70 Watts
- Impedance - 4 ohms
- Sound Pressure Level: 88dB
- Frequency Response: 58 - 21,000Hz
- Carbon Mica Cone
- Hybrid Surround
UPC Code 046838079788
This JVC marine amplifier is rated waterproof and dustproof. A Drain Tunnel Structure is employed for creating a gap between the amplifier and the installation surface. This prevents saltwater and sand from accumulating on the bottom, increasing corrosion protection. The amplifier mounting section is made of 15/64 inch die-cast material to suppress the amplification of vibration. In addition, the thick heat-transfer sheet was also placed to the substrate and the Aluminum die cast heat sink to suppress the vibration of the substrate. Thicker terminal connection points and increased wire size enables maximum current flow and higher output for better low frequency response and cleaner output. High Quality PMLCAP’s (Polymer Multi-Layer Capacitors) are utilized to lower distortion levels, improving the overall listening experience at higher volumes, while maintaining the integrity of the sound. Magnetic Shielding for the output coils reduce radiated noise, delivering smooth and accurate sound.
General Features:
- Max Power Output: 600W
- Rated Power Output @ Stereo (4Ω): 50W x 4 (20Hz–20kHz, ≤1.0% THD)
- Rated Power Output @ Stereo (2Ω): 75W x 4 (1kHz, ≤1.0% THD)
- Rated Power Output @ Bridged (4Ω): 150W x 2 (1kHz, ≤1.0% THD)
- Speaker Impedance: 4Ω (2Ω to 8Ω allowable)
- Speaker Impedance for Bridged connection: 4Ω to 8Ω allowable
- Frequency response (+0, –3dB): 10Hz–35kHz
- Input Sensitivity (RCA): 0.2V-5.0V
- Signal to noise ratio: 89dB
- Low pass filter frequency (–12dB/oct.): 50Hz–200Hz (variable)
- High pass filter frequency (–12dB/oct.): 50Hz–200Hz (variable)
- Operating voltage: 12V DC car battery
- Current consumption: 26A
- Operational temperature range: –10°C – 60°C
- Dimensions (W × H × D): 7-13/16" x 1-15/16" x 4-1/8"
- Weight: 1.6kg (3.5lbs)
- Waterproof Dustproof Vibrationproof: IP66, IP67
UPC Code 046838001925
The Enrock 8-Gauge Amplifier Installation Kit makes installing your brand new sound system in your car or truck much easier. It includes all of the cables, wires, tubing, ties, grommets and ring terminals that you will need in order to get your new sound system up and running. The car amp install kit works with a wide range of sound systems and car types and it makes the installation process easy.
General Features:
- 20 ft. 8 GA Red Power Cable.
- Competition High Quality Fuse Holder.
- 1/4" Ring Terminal.
- 3 ft. 8 GA Black Ground Cable #10 Ring Terminal.
- 16 ft. 18 GA Blue Turn-On Wire.
- 20 ft. High Performance RCA (TRCA) Interconnect (3) Rubber Grommets.
- 30 ft. Speaker Wire 5/16" Ring Terminal.
- 6 ft. Split Loom Tubing (20) 4" Wire Ties.
UPC Code 728120451105
