Infinity Alpha 100 Single DIN Bluetooth USB/AUX SD FM Radio MP3 Digital Media Car Receiver, 2x 6x9" 360 Watt Max 3-Way Audio Speakers, 2-Channel Amplifier with Wiring Install Kit

---

The Infinity Alpha 100 is an easily mounted single DIN car receiver featuring a detachable face, FM radio, a USB and SD card reader to access your music files, built in Bluetooth for hands free calling mode and streaming music from a connected device. The multimedia system provides 50W x 4 of power to give you the sound you crave and includes an AUX input.

General Features:

• Single DIN Receiver
• Bluetooth Audio Mode and Hands Free Calling
• FM Radio Tuner
• Playback from USB drives and SD memory cards
• AUX input
• Recommended Speaker Impedance: 4 Ohms
• Frequency Response: 20 Hz - 20 kHz
• Rated Output Power: 4 x 50W Peak
• Signal to Noise Ratio: 70dB
• Detachable Face
• 10A Fuse Rating
• Power Supply: 12V DC On-Board Network

UPC Code 050667378639

---

The Kicker 43DSC69304 6x9" 3-way car audio speakers features a MAX power of 360 watts and an RMS power of 70 watts. A drop-in coaxial upgrade with the flexibility to fit nearly any vehicles doors for a vast improvement over factory sound. Also, the thin-profile woofers avoid obstructing car-window mechanisms and the 13mm polyethylene-naphthalate domed tweeters have zero-to-minimal tweeter protrusion. The high-sensitivity motor structures of the woofers are made to deliver increased volume output despite lower-powered, factory head units, but they also handle the high power from add-on amps. The midrange woofer's stiff, polypropylene cones and acoustic-foam surrounds provide optimal performance.

General Features:

• 6x9" 2016 DS Series 3-Way Car Speakers.
• Power Handling: Peak: 360 watts / RMS: 180 watts per pair.
• Recommended Power Range: 6 - 90 watts RMS per channel.
• 2" zero protrusion midrange woofer.
• Rigid polypropylene cone material.
• Polyester foam speaker surround.
• Stamped steel basket.
• EVC (Extended Voice Coil) technology.
• 1/2" zero protrusion polyetherimide balanced dome tweeter.
• Neodymium Tweeter magnet.
• Grilles included.
• Top-mount Depth: 3.25"
• Cutout Dimensions: 5.625 x 8.4375"
• 4 ohms impedance.
• Frequency Response: 30 - 20,000 Hz
• Sensitivity: 92dB.

UPC Code 713034077701

---

This compact JBL Stage 2-Channel amplifier is equipped with all the important inputs and user controls including a bass EQ as well as LPF and HPF crossover controls for tailoring sound to suit the characteristics of different vehicles. The Stage amplifier is easily installed and amazingly reliable – and once it turns on, they’ll make a transducer sit up and sing. Black with deep grooves, silver silkscreen, anodized JBL badge top-center with orange end panels and bottom, this amplifier features a sleek, exterior design that will add a classy, visual flair while enhancing your vehicle's sound system!

General Features

• 2-Channel Car Amplifier
• Value Engineered
• Compact footprint
• Full On-Board Protection
• Reliability
• Input Level Control
• Switchable bass EQ
• Cool industrial design
• Crossover mode switch
• Power Output: 60Wx2 @ 4 Ohms
• High/Low-Pass Filter
• Input Sensitivity: 0.2V-5V
• Frequency Response: 20-20kHz±1dB

UPC Code 050036357098

---

The Enrock 8-Gauge Amplifier Installation Kit makes installing your brand new sound system in your car or truck much easier. It includes all of the cables, wires, tubing, ties, grommets and ring terminals that you will need in order to get your new sound system up and running. The car amp install kit works with a wide range of sound systems and car types and it makes the installation process easy.

General Features:

• 20 ft. 8 GA Red Power Cable.
• Competition High Quality Fuse Holder.
• 1/4" Ring Terminal.
• 3 ft. 8 GA Black Ground Cable #10 Ring Terminal.
• 16 ft. 18 GA Blue Turn-On Wire.
• 20 ft. High Performance RCA (TRCA) Interconnect (3) Rubber Grommets.
• 30 ft. Speaker Wire 5/16" Ring Terminal.
• 6 ft. Split Loom Tubing (20) 4" Wire Ties.

UPC Code 728120451105