Pyle PDA5BU Bluetooth USB Amplifier, Kicker 46KB6G 6.5" Box Speakers and Wiring
Rock that legendary KICKER sound inside, outside or out and about! Play the KB6 on your backyard deck, under the eaves, inside the shop, or near the pool for great sound, rain or shine. You can even go mobile! Use the universal bracket to mount the KB6 on your boat, off-road vehicle or RV.
The KB6 is a full-range, high-efficiency speaker system truly suitable for indoor and outdoor use. Providing an 8-Ohm load and ready to be driven by your home stereo receiver or a car-audio amplifier, you can easily run a single pair or more with minimal effort (min. 18 AWG speaker wire required for easy-pinch terminals). The included bracketing makes it easy to install vertically or horizontally - on nearly any flat surface.
Designed as a dual-enclosure weatherproof system, the KB6 features bold 6-1/2 -inch KICKER woofers and 2 x 5-inch, compression-loaded horn tweeters. The woofers utilize precisely tuned polypropylene cones and rugged Santoprene® surrounds. The system acoustically blends powerful bass and thrilling highs for an all-weather KICKER sound you’ll love to listen to all day long.
General Features:
- Compression Loaded Horn Tweeters
- Polypropylene Woofer Cones
- Santoprene Surrounds
- Full-Range Sound Reproduction
- Type: 2-Way
- Components per Enclosure: 6.5" Woofer, 2x5" Horn
- Peak Rec Amp Power: 150W
- RMS Rec Amp Power: 75W
- Frequency Response: 55-21kHz
- Impedance: 8-Ohms
- Sensitivity: 90dB 1w/1m
- Grilles: Yes
- Standard Dimensions (in.): 11W x 8-1/8H x 8-1/8D
- Metric Dimensions (cm.): 27.9W x 20.7H x 20.7D
UPC Code 713034004028
Pyle's 200 watt Bluetooth Stereo Amplifier is the perfect solution for all of your home or office audio needs. Using the latest sound amplification technology, this receiver is designed to perform and deliver clear and accurate sound. Experience warm, detailed audio from all of your music sources. This multifunctional amp and receiver utilizes wireless Bluetooth audio transmission and works with virtually any Bluetooth-enabled device (iPhone, Android, Smartphone, iPad, Tablet, PC, etc.) Unit features built-in FM radio with 60 station memory presets.
General Features:
- Compact Stereo Power Amplifier
- Desktop Home Theater Receiver System
- Built-in Bluetooth for Wireless Music Streaming
- Next-Generation ‘SMT’ Surface-Mount Technology PCB
- Multi-Channel Audio Input Selection
- FM Radio with Digital LCD Display
- ID3 Tag Song Readout Displays Track Title
- Connect & Stream Audio from External Devices
- MP3 Digital Audio File Playback
- USB Flash Drive & SD Memory Card Readers
- USB Port Doubles as Device Charge Port
- Aux (3.5mm) Input Jack
- RCA (L/R) Input and Output Connector Jacks
- (2) Pairs Banana Plug Speaker Output Connectors
- (2) 1/4'' Microphone Input Connector Jacks
- Front Panel Button Control Center
- Unique 'Track / Folder' Music Search Control Knob
- Treble, Bass, Master & Microphone Volume Adjustable
Bluetooth Connectivity:
- Receives Wireless Signal for Audio Streaming
- Simple & Hassle-Free Pairing Setup
- Integrated Antenna for Extended Wireless Range
- Works with All of Today’s Latest Bluetooth Devices
- (Smartphones, Tablets, Laptops, Computers, etc.)
- Bluetooth Network Name: ‘Pyle Speaker’
- Bluetooth Network Password: ‘0000’ (4 Zeroes)
- Bluetooth Version: 4.2
- Wireless Range: Up to 25’+ ft.
What's in the Box:
- Compact Home Amplifier
- Remote Control
- Radio Antennas
Technical Specs:
- Amplifier Component Circuitry: Transistor Type
- Power Output: 200 Watt (@ 4 Ohm) MAX
- Tone Control: Bass, f=100Hz +/-8dB
- Frequency Response: 20Hz - 20kHz
- Signal to Noise Ratio: >71dB
- T.H.D.: <0.1%
- Radio Station Memory: 60 Station Presets
- Digital Filetype Compatibility: MP3 with MP3, WAVE, WMA, FLAC, APE
- Maximum USB/SD Flash Support: 64GB
- Battery Operated Remote: Requires (1) x ‘CR-2025’ Battery, Included
- Power Supply: 110V/220V
- Dimensions: (L x W x H) 10.03'' x 7.87'' x 3.14'' - inches
- Sold as: Unit
- Weight: 6.05 lbs.
UPC Code 068888754507
EnrockAudio 16-Gauge Speaker Wire
This 16-gauge speaker wire with spool from EnrockBasics lets you easily connect your speakers to amplifiers or receivers.
Marked Polarity
One side of the wire is marked with a white line, making it quick and easy to distinguish the polarity and get your audio system set up properly.
Easy to Use
The EnrockAudio 16-gauge Speaker Wire comes wrapped around a hard plastic spool that makes dispensing convenient and easy.
Details
Connects audio speakers to your A/V receiver or amplifier no distortion. The plastic jacket around the speaker wire helps to deliver high-quality undistorted signals to and from all of your audio equipment.
General Features:
- 50 Feet of 16-gauge speaker wire.
- Connects audio speakers to your A/V receiver or amplifier.
UPC Code 799861390381
