4x Kicker BKM604W 6.5" 150W Speakers, 4x Tower Enclosure, 4-CH 1000W Amp w/Kit
Kickers 6 ½” marine speakers emit perfect sound. Planned for life at sea, these powerful 4-ohm speakers provide sealed motors, rubber cone surrounds, and locking terminal covers to keep your internal components safe. They’ll be ok under harsh sunlight, due to special UV treatments on the cones, surrounds, baskets and grilles. Wherever you take them, those speakers will provide years of perfect performance.
The Kicker speakers are strong for marine use yet easy on the ears. The tough poly woofers and balanced dome tweeters plow through wind, waves and engine roar to provide you with clear sound without any roughness. Whether you mount them up top or install them in custom enclosures, these Kicker speakers will make your time at sea that much more entertaining.
General Features:
- Pair of Kicker 6.5" 195W Peak / 65W RMS 4-Ohm 2-Way Coaxial Marine Speakers
- Power Handling Per Speaker: 195 Watts Peak / 65 Watts RMS Per Speaker
- Power Handling Per Pair: 390 Watts Peak / 130 Watts RMS Per Pair
- 2-Way Design
- Santoprene Surrounds
- Woofer Size: 6.5"
- Woofer Composition Titanium
- Tweeter Size: 1/2"
- Tweeter Dome Material: Titanium
- Impedance: 4-Ohms
- Sensitivity: 90dB
- Frequency Response: 35-21,000 Hz
- Cutout Dimensions: 5.12"
- Top-Mount Depth: 2.87"
- warranty: 1 year?
- impedance: 4 ohms
- mounting depth: 2-3/8"
- sealed motor structure and locking terminal covers
- 1/2" balanced dome titanium tweeter
- UV-treated polypropylene woofer with Santoprene rubber surround
- Comes in bulk packaging with no additional hardware or accessories
UPC Code 713034071068
This Pyle Hydra amp will power your speakers on the dock, in your boat, or by the pool - it's completely waterproof. This 4-channel, 1000-watt bridgeable marine amp takes both high and low level inputs, so it's compatible with a variety of head units and sources. Use in stereo, or double the power by bridging inputs. Comes with variable electronic crossover network, variable bass boost, and variable gain control for total control over your sound. Blue LED level display lets you keep an eye on your signal. For protection, count on the thermal, overload, and short circuit protection. Runs on 12 volts DC.
General Features:
- 250 Watts x 4 Output
- 500 Watts x 2 Bridged Output (250W x 2 + 500W x 1)
- Dual Variable Hi/Lo Electronic Crossover Network
- Dual Variable Bass Boost
- Power On LED Indicator
- LED Protection Indicator
- Blue LED Level Display
- Tri-Mode Configurable
- Variable Input Level (Gain) Control
- Thermal, Overload, Short Circuit Protection
- Dimensions: 10.9'' W x 2.7'' H x 12'' L
UPC Code 068888724852
The Power Sport Motorcycle Universal Amplifier Wiring Kit includes the following 6 foot length of red and black T-Spec OFC power and ground wire with a T-Spec V8MANL fuse holder, 60 amp fuse protected by a black nylon braid, Pre-terminated ring terminals, (2) 4 foot pieces of 16 gauge OFC speaker wire protected by black nylon mesh and 4"x6" hook and loop mounting pad for micro-amplifiers.
Amplifier Wiring Kit:
- Designed tor motorcycles
- 6 feet of red and black T-Spec OFC power and ground wire with a T-Spec V8MANL fuse holder and 60 amp fuse protected by a black nylon braid
- Pre-terminated ring terminals make connections to the battery simple
- Two 4 foot pieces of 16 gauge OFC speaker wire protected by black nylon mesh makes upgrading the factory speaker wires or adding new speakers a smart choice
- Upgrading Harmon Kardon System – Two 47-ohm .5 watt resistors to keep the factory radio outputs active
- All the necessary installation hardware is included along wtth a 4 × 6 inch hook and loop mounting pad for micro-amplifiers to hold the amplifier securely in place
UPC Code 086429332267
The 12-KMTESW Was Designed specifically for marine and powersports applications, these bold black enclosures are built to take whatever your active outdoor lifestyle can dish out. With rugged ABS plastic shells and an acoustic polyfill lining, you get long-lasting durability and outstanding performance. The package includes 2-5/8" aluminum tower-pipe clamps and mounting adapters for three popular pipe diameters.
Whether you're mounting your Kicker speakers on a boat, an SUV, or even a Jeep, you want your music to sound great. These enclosures rotate nine degrees in either direction, so you can aim the speaker to achieve maximum coverage. Slotted mounting holes accommodate different speaker bolt patterns, while stainless-steel speaker terminals ensure quick and easy wiring connections.
General Features:
- Fits 6.5" (165mm) Midrange/Woofer Speakers, Drivers.
- Each enclosure holds one 6.5" Speaker
- For marine and powersport applications.
- Tough ABS.
- weather-proof empty enclosures with slotted mounting holes for different bolt patterns.
- Nine-degree axis rotation in either direction for aiming maximum sound quality.
- Fits Mounting Tube Sizes : 2-1/4, 2-3/8, 2-1/2, 2-5/8
- Satin nickel plated brass binding posts.
- Includes Mounting hardware and polyfill.
- Weather-proof And Durable ABS Material.
- For marine and powersport applications.
- 9-degree axis rotation for directional sound.
- Satin nickel plated brass binding post connectors (screw to tighten style)
- Slotted mounting holes for different bolt patterns.
- 9-degree axis rotation for directional sound.
- Color: White.
Includes:
- Mounting Hardware
- Polyfill
- Screws
- Aluminum tower-pipe clamps (2-5/8-inch)
- 3 Mounting Adapter Sizes: 2-1/4, 2-3/8, 2-1/2, 2-5/8
- Billet-aluminum brackets and clamp inserts adjust to seven common sizes for easy install
UPC Code 713034075837
6.5" White Grille for Kicker 6.5" Marine Coaxial Speaker
6-½" Marine Speaker Grille
Color: White, UV-treated, Durable ABS Material, Compatible ONLY with Kicker 6-½" KM, KMFC, KMTC and KMTDC Series Marine Speakers
6.5" White Grille for Kicker 6.5" Marine Coaxial Speaker
UPC Code 713034085133
