Infinity 6.5" Marine 225W 2-Way Speakers, 4-Channel Marine Amplifier, Wire Kit
Infinity's Marine speakers are constructed of solid, weather-resistant material, put together in the most careful, precise manner will provide you with a musical and listening experience that will keep you attached to your boat.
The 6-1/2" speakers feature a polypropylene woofer cone bonded to a tough, UV-resistant rubber surround, which delivers full bass response and does a superb job deflecting sunlight and moisture. The corrosion-proof, cast-polymer basket resists deterioration from salt, moisture, and UV rays, while the stylish non-removable grille is specially meant for retaining its shiny chrome finish.
The grille-mounted 1" tweeter offers excellent high-frequency projection. Infinity seals the front of the woofer cone along with the speaker's magnet structure, serving as extra protection against moisture. Stainless steel mounting hardware is not included.
General Features:
- 2-way 6-1/2" marine speakers (pair)
- Power range: 2-75 watts RMS = 225 watts peak power.
- Polypropylene woofer cone with UV-resistant rubber surround.
- Grille-mounted 1" polypropylene semi-dome tweeter.
- Cast-polymer basket.
- Frequency response: 50-20,000 Hz.
- Sensitivity: 92 dB @ 2.83V.
- Top-mount depth: 2-5/8".
- Screws and hardware not included.
- Speakers include all manufacturer provided accessories and are packaged in bulk, they do not include manufacturers box.
UPC Code 050667371890
Using a Class-D power plant, this amp features a variable bass boost with KickEQ™, giving you as much as 6dB of extra bump. Powering as many as eight speakers, this amplifier makes your entire boat sound like a floating concert! A powerful 12dB crossover is also included, letting you quickly tune your system to perfection. This KM-Series amplifier delivers 90 watts into four channels, or 180 watts bridged into two channels.
General Features:
- Class D Power Supply
- 500 Watts of Dynamic Power
- Four-Channel Amplifier with Bridging Capability
- Conformal-Coated Circuit Board
- Variable 12dB Crossover
- KickEQ Variable 6dB Bass Boost
- Real Marine ABYC/NMMA-Compliant Power Connections
- 316L Stainless-Steel Hardware Included
- POWER [watts/ch], 2 OHM STEREO: 90 x 4
- POWER [watts/ch], 4 OHM BRIDGED MONO: 180 x 2
- DYNAMIC POWER [watts]: 500
- DIMS [in] all models 2-5/16H x 7-1/8W x ___L: 12-7/16
- DIMS [cm] all models 5.9H x 18.0W x ___L: 31.5
- FREQUENCY RESPONSE [Hz]: 10-20k, +0/-1dB
- High Level Sensitivity: 250mV-10V
- Low Level Sensitivity: 125mV-5V
- SIGNAL-TO-NOISE RATIO: >95dB, a-weighted, re: rated power
- ACTIVE CROSSOVER: 12dB/octave, variable 50-200Hz, selectable high pass, low pass or all pass
- KickEQ BOOST Variable 0-6dB, centered @ 40Hz
UPC Code 713034020370
This Kicker 8 Gauge Power Amplifier Wiring Kit includes all the necessary hardware and wire to power one amplifier and is designed specifically for car audio systems up to 1000 watts. The included premium power/ground cable is made from 100% oxygen-free copper and is true-to-gauge for ultimate power transfer. This PK8 power amp kit includes 17-feet of 8 Gauge power cable, 2-feet of 8 Gauge ground cable, 17-feet of 16 Gauge remote turn-on wire, 2-channel RCA cable, Maxi Fuse holder, 60 Amp fuse and more. KICKER® amp power kits feature top-quality Hyper-Flex™ power, ground and turn-on cables. A heavy-duty AFS fuse holder, fuse, terminals and zip ties come in the kit as well. One additional year of amplifier warranty is included if purchased with a KICKER amp.
General Features:
- 8 Gauge OFC Power Amplifier Installation Kit
- Designed specifically for car audio systems up to 1000 watts
- Premium power and ground wire provides optimal power transfer
- Made from 100% oxygen-free copper for a pure uninterrupted transfer of power
- Includes 2-channel RCA interconnect cables for the audio signal connection from the receiver to the amplifier
UPC Code 713034064978
