4x Kicker 6.5" 195W Marine Speakers, White Grilles, Bluetooth Amplifier w/Kit
Kickers 6 ½” marine speakers emit perfect sound. Planned for life at sea, these powerful 4-ohm speakers provide sealed motors, rubber cone surrounds, and locking terminal covers to keep your internal components safe. They’ll be ok under harsh sunlight, due to special UV treatments on the cones, surrounds, baskets and grilles. Wherever you take them, those speakers will provide years of perfect performance.
The Kicker speakers are strong for marine use yet easy on the ears. The tough poly woofers and balanced dome tweeters plow through wind, waves and engine roar to provide you with clear sound without any roughness. Whether you mount them up top or install them in custom enclosures, these Kicker speakers will make your time at sea that much more entertaining.
General Features:
- Pair of Kicker 6.5" 195W Peak / 65W RMS 4-Ohm 2-Way Coaxial Marine Speakers
- Power Handling Per Speaker: 195 Watts Peak / 65 Watts RMS Per Speaker
- Power Handling Per Pair: 390 Watts Peak / 130 Watts RMS Per Pair
- 2-Way Design
- Santoprene Surrounds
- Woofer Size: 6.5"
- Woofer Composition Titanium
- Tweeter Size: 1/2"
- Tweeter Dome Material: Titanium
- Impedance: 4-Ohms
- Sensitivity: 90dB
- Frequency Response: 35-21,000 Hz
- Cutout Dimensions: 5.12"
- Top-Mount Depth: 2.87"
- warranty: 1 year?
- impedance: 4 ohms
- mounting depth: 2-3/8"
- sealed motor structure and locking terminal covers
- 1/2" balanced dome titanium tweeter
- UV-treated polypropylene woofer with Santoprene rubber surround
- Comes in bulk packaging with no additional hardware or accessories
UPC Code 713034071068
This Pyle Hydra amp will power your speakers on the dock, in your boat, or by the pool - it's completely waterproof. This 4-channel, 1000-watt bridgeable marine amp takes both high and low level inputs, so it's compatible with a variety of head units and sources. Use in stereo, or double the power by bridging inputs. Comes with variable electronic crossover network, variable bass boost, and variable gain control for total control over your sound. Blue LED level display lets you keep an eye on your signal. For protection, count on the thermal, overload, and short circuit protection. Runs on 12 volts DC.
Amplifier:
- 250 Watts x 4 Output
- 500 Watts x 2 Bridged Output (250W x 2 + 500W x 1)
- Dual Variable Hi/Lo Electronic Crossover Network
- Dual Variable Bass Boost
- Power On LED Indicator
- LED Protection Indicator
- Blue LED Level Display
- Tri-Mode Configurable
- Variable Input Level (Gain) Control
- Thermal, Overload, Short Circuit Protection
- Dimensions: 10.9'' W x 2.7'' H x 12'' L
UPC Code 068888724852
Power your marine amplifier with a wiring kit that can withstand the harsh environment and still deliver full sound performance. Fully tinned wiring ensures that these amp kits won’t corrode or oxidize and turn green after a season on the water. Oxygen-free copper provides a reliable connection with maximum conductivity. By using 100% virgin copper the tin won’t flake off, something commonly seen when using recycled copper materials. While it is also common to tin just the tips of the wire for cost savings, this practice does not actually provide any benefits. Metra’s amp kits use fully tinned copper wire from top to bottom that can withstand a harsh marine environment and salty air. The ignition-protected 50-amp circuit breaker is IP67 rated with stainless steel connection points for corrosion resistance
Amplifier Wiring Kit:
- Marine compliant amplifier wiring kit
- Fully tinned 100% virgin copper wire
- BC5W2 marine compliant jacket
- 50-amp marine circuit breaker is rated IP67 with stainless steel connection points for corrosion resistance
- Easy to solder tinned wiring
- Connectors, ring terminals, and wire ties included
What’s in the box:
- (1) 8-gauge tinned oxygen-free copper side-by-side red power and yellow ground wire (10ft.)
- (1) 18-gauge tinned oxygen-free copper blue remote turn-on wire (18ft.)
- (2) 8-gauge ring terminal with shrink tube and logo, pre-terminated on each end of the 2ft. red wire
- (1) 8-gauge ring terminal with shrink tube and logo, pre-terminated on 8ft. red wire
- (1) 8-gauge ring terminal with shrink tube and logo, pre-terminated on yellow wire
- (1) Ignition protected circuit breaker (50-amp)
UPC Code 086429416820
A ground-breaking virgin-PVC, Hyper-Flex insulation and multi-strand construction allows you to bend, twist, and contort the cable in any way imaginable for an ultimate installation experience while delivering maximum current flow; remains ultra-flexible under hot or cold temperature extremes; transfers the cleanest audio signal possible by using tightly twisted, silver-tinned OFC copper conductors; zip line to easily remove outer insulation.
Speaker Wire:
- 20 Feet
- 16 Gauge
- Silver-tinned OFC (oxygen-free copper)
UPC Code 632016086404
6.5" White Grille for Kicker 6.5" Marine Coaxial Speaker
6-½" Marine Speaker Grille
Color: White, UV-treated, Durable ABS Material, Compatible ONLY with Kicker 6-½" KM, KMFC, KMTC and KMTDC Series Marine Speakers
6.5" White Grille for Kicker 6.5" Marine Coaxial Speaker
UPC Code 713034085133
