JBL Stage Marine 10" 600 Watt Peak Power Marine Audio Subwoofer (Gray, Pair) and 1200 Watt Max Mono Car Amplifier

This JBL Stage Marine Subwoofer is ready to take on your next outdoor adventure. This fully marinized subwoofer not only delivers JBL sound, but it brings the sound to life. Engineered to withstand sun, salt, sea spray and wash downs, they feature sealed motor structure, UV resistant one-piece cast-polymer baskets and rubber surrounds. The polypropyelene cone provides great bass and lots of output to ensure low frequencies can be heard loud and clear.

General Features:

• IPx5 Rated
• Outdoor Performance
• Marine Design
• Balanced Dome Tweeters
• Rubber Surrounds
• Individually Voiced
• Harman Standard Reliability Tested
• Power Handling: 200Wrms, 600W peak
• Sensitivity (@ 2.83V): 88dB
• Frequency Response: 30Hz – 250Hz
• Nominal Impedance: 4 ohms

What's in the box?:

• 1 x Subwoofer with attached grille
• 1 x Stainless steel mounting hardware
• 1 x Drill bit for easy installation
• 1 x Foam gasket
• 1 x Subwoofer pigtail harness
• 2 x JBL sticker
• 1 x Quick Start Guide

The CXA1200.1 Mono Amplifier is built for affordable power and performance, thanks to an optimized circuit layout and the high-grade internal components.

This mono CX-Series Amp is now one-ohm stable, giving you even more wiring options for your system! Using a Class-D power plant, the CXA1200.1 features a variable bass boost with KickEQ™, giving you as much as a 6dB of extra bump with a simple turn of the optional CXARC Remote Bass Controller. A powerful 12dB crossover and 24dB subsonic filter is included, letting you quickly tune your system to perfection.

CX-Series Amplifiers accept up to 40 volts (400 watts) of speaker-level input signal. This kind of flexibility both makes line-out converters unnecessary and optimizes your sound quality at the same time!

Use the full-range outputs to expand your system with other bass amps, or add a full-range amp to complete your system.

This CX.1 Amplifier delivers as much as 1,200 watts into one bass channel.

General Features:

• Efficient Class-D amplifier
• Three-second turn-on/off delay to eliminate unwanted interference
• Variable 12dB crossovers provides control to dial in perfect sound
• KickEQ™ 6dB variable bass boost for those additional low frequencies
• 24dB subsonic filter for protection from potentially damaging frequencies
• FIT+™ (Fail-safe Integration Technology-PLUS) means it works with nearly every radio
• Accepts up to 40-volt input signal
• Small footprint for easier installation
• Compatible with CXARC Remote Bass Control
• Vertical mounting hardware included for another unique look
• Power (watts/ch) 4 Ohm: 600x1
• Power (watts/ch) 2 Ohm: 1200x1
• Power (watts/ch) 1 Ohm: 1200x1 +/-10%
• CXRC Remote Bass Capable (sold sep.): yes
• Dimensions (in, cm): (all models 2-3/8, 5.9H x 6-3/4, 17W x ...L): 12, 30.6
• Frequency Response (Hz): 25-200Hz
• Input Sensitivity: 250mV-10V (Low Level), 1V-40V (High Level)
• Signal-to-Noise Ratio: 95dB
• Active Crossover: Variable Lo-pass 50Hz–200Hz, 12dB/octave
• Subsonic Filter: 25Hz @24dB/octave
• KickEQ™ Boost: Variable 0-6dB @40Hz