2x Kicker 10" 1000W Car Audio Subwoofer, 300W Subwoofer Mono Amplifier W/Kit
The only thing thin about the L7T thin subwoofer is the mounting depth. Whether it’s on the road or trail, these tough subs work perfectly in nearly anything with a motor. The L7T 10-inch Subwoofer is a true-bass, thin subwoofer with a pair of 2Ω voice coils. SoloKon technology uses an injection-molded polypropylene cone and 360-degree back bracing as a single solid unit - both cooling the motor and eliminating distortion. Patented ribbed corners are incorporated into the high-roll Santoprene surround to move smoothly under high SPL. We then stitch the cone to the surround, providing an additional level of integrity that thrives no matter the application. Match any L7T thin sub with a KX-Series mono amplifier for an outstanding combination of power and size. The L7T 10-inch Subwoofer works best with a sealed or ported enclosure and 500 watts of recommended power.
General Features:
- Uses a Sealed or Ported Enclosure
- Square Sub Design Moves 20% More Air Than Round Subwoofers
- Easily Mounts Under or Behind a Seat
- Dual Voice Coil Design
- Ribbed Santoprene Surround Resists Heat And Degrading
- Bumped Top Plate For More Excursion & Smoother Performance
- SoloKon Cone With 360-Degree Back Bracing
- UniPlate Solid Pole Piece & Backplate For Excellent Heat Dissipation
- Durable Steel Basket
- Size (IN.,CM): 10, 25
- Impedance (OHMS): 2 DVC
- Recommended Amplifier Power (watts RMS): 500
- Peak Power (watts, per ANSI/CTA-2031-A): 1000
- Sensitivity (dB 1w/1m): 85.98
- Frequency Response (Hz): 25-100
- Mounting Depth (IN.,CM): 3-3/4, 9.5
- Mounting Cutout, Square (IN.,CM): 9-5/16, 23.7
- Min Rec Sealed Box Volume (CU. FT., Liters): 0.4, 11.3
- Max Rec Sealed Box Volume (CU. FT., Liters): 1.0, 28.3
- Min Rec Vented Box Volume (CU. Ft., Liters): 1.25, 35.4
- Max Rec Vented Box Volume (CU. Ft., Liters): 1.75, 49.6
- What's in the box?: one 10-inch subwoofer, one owner's manual, two stickers
UPC Code 713034085805
This Infinity Primus Amp delivers the right power for subwoofer applications. This compact amp is equipped with all the important inputs and user controls including a bass EQ as well as LPF and HPF crossover controls for tailoring sound to suit the characteristics of different vehicles. This amp is easily installed and amazingly reliable - and once they turn on, they'll make a transducer sit up and sing.
General Features
- Mono Subwoofer Amplifier
- Preamp and speaker-level inputs
- Extruded Heatsink
- Low- and High-Level Inputs
- Switchable Bass EQ
- Onboard Active Crossover
- Full Conventional Protection Suite (OCP, OTP, OVP, UVP, DC)
- Fuse rating: 20A x 1
- 300 watts RMS x 1 at 2 ohms ( 4-ohm rating unavailable)
- Variable Low-pass filters: 32-320 Hz, 12 dB/octave
- Variable bass boost: 0-12 dB at 45 Hz
UPC Code 050667373344
The Kicker complete amp kit features top-quality Hyper-Flex power, ground and turn-on cables. K Series speaker wire and interconnects are also included, as is a heavy-duty AFS fuse holder and fusing. Insulated crimp connectors and zip ties come in the kit as well.
Comes complete with Full Spec wire, hardware, fusing and signal cable.
Hooking up your amplifier is easy with this complete amp kit. All kits include pure, full-spec OFC (oxygen-free copper) cabling for max power transfer, superior bass response and signal clarity.
Included In Amp Kit:
- 17 ft 4 awg blue power wire
- 4 ft 4 awg gray ground wire
- Self tapping bolt and washer
- FHS fuse holder with 100 amp fuse L=3.06", W=1.33", H=1.32"
- 17 ft 16 gauge remote wire
- 16.4 ft KI RCAs
- 12 ft Q series 12 awg speaker wire
- 6x 6" zip ties
- 4 awg firewall grommet
- 1x 18-22 awg butt connector
- 4x 12 awg fork terminals
- 2x blue fork terminal boots
- 2x black fork terminal boots
UPC Code 713034088653