4x Enrock EMRGB265B-V2 6.5" Speakers w/ MultiColor LED, 4-Channel Amp w/ Kit
The 6.5" marine speakers with Chrome Grilles are designed specifically for boats and the outdoors with a MAX power of 120 watts and a RMS power of 60 watts. Equipped with removable multi-color LED accent lighting that can be changed to fit your mood or craft. The bold, stylish design comes packaged with easy-to-match grilles for a customized look that includes a smart, integrated moisture-draining system.
General Features:
- 6.5" 2-Way Speakers
- Marine Grade
- RMS Power: 60 Watts
- Max Power: 120 Watts
- Impedance: 4 Ohm
- Sound Pressure Level: 88 dB
- Frequency Response: 64Hz to 20kHz
- Multi-Color LED Lighting
- Cone: PP Cone Rubber Edge
- Tweeter Material: Titanium
- Chrome Grilles - Included
UPC Code
Enrock 6.5-Inch (25cm) Grilles for EM265RGB Marine Speaker (Chrome, Pair)
Enrock 6.5" Grille for EM265RGB Marine Speaker (Chrome)
UPC Code
Enrock 6.5-Inch (25cm) Grilles for EM265RGB Marine Speaker (Charcoal, Pair)
Enrock 6.5-Inch (25cm) Grille for EM265RGB Marine Speaker (Charcoal)
UPC Code
This 4-channel waterproof MP3/iPod marine amplifier is a powerful addition to your marine audio setup. It pushes 200 watts maximum on each of the two channels for a bone-rattling power that's basically unmatched. It takes RCA line inputs and includes a 3.5mm-to-RCA adaptor so you can plug in your MP3 player or iPod easily. Also takes standard high and low level inputs from a marine head-unit. Comes with a wired remote control for volume gain. For safety, this amp is equipped with power protection circuitry and soft turn on/off prevents damage to your speaker equipment.
General Features:
- 4 x 100 Watts RMS at 4 Ohms
- 4 x 200 Watts Max at 4 Ohms
- 4 x 300 Watts RMS at 2 Ohms
- Fuse: 10A
- RCA Line Input
- T.H.D: <0.05%
- Soft Turn On/Off
- S/N Ratio: >95dB
- Anti-Thump Turn-On
- 2 Ohms Stereo Stable
- Power Protection Circuitry
- Channel Separation: >65dB
- Volume Gain Remote Control
- Remote Control for Volume Gain
- Converter: High Low Level Inputs
- Frequency Response: 10Hz - 40kHz
- Dimensions: 6.10'' L x 3.35'' W x 1.38'' H
UPC Code 068888897976
Get all the wires you need to hook up a new marine audio system with this Pyle Hydra amplifier installation kit. These wires have high resistance to moisture, so they’re a great fit on your boat or in outdoor settings. Included wires: 20 ft. 8-gauge red power wire, 4 ft. 8 gauge black ground wire, 20 ft. 18-gauge blue remote turn-on, 20 f. 12 gauge stereo speaker wire, 20 ft. stereo RCA cable, and 6 ft. black split loom cable conduit. Also includes an AGU type 60A gold-plated fuse, water resistant in-line fuse holder, two 8G ring terminals, two 8G spade terminals, five 14-16G spade terminals, 3 butt connectors, 20 cable ties, and one black grommet.
General Features:
- Marine Grade Cables and Wires
- Perfect for Installations in Boats and Outdoor
- High Resistance to Moisture
- 20ft. 8 Gauge Red Power Wire
- 4ft. 8 Gauge Black ground Wire
- 20ft. 18 Gauge Blue Remote Turn-On
- 20ft. 12 Gauge StereoSpeaker Wire
- 20ft. Right Angle/Standard Stereo RCA Audio Cable
- 6ft. Black Split Loom Cable Conduit
- AGU Type 60A Gold Plated Fuse
- Water Resistant In-line Fuse Holder
- 2 Ring Terminals: 8G
- 2 Spade Terminals: 8G
- 5 Spade Terminals: 14-16G
- 3 Butt Connectors 20 Cable Ties
- 1 Black Grommet
- Sold as: 0
- Weight: 2.1 lbs.
UPC Code 068888882415
