JVC KS-DR2104DBT 600W Bluetooth Amp w/Remote, Amp Kit, 4x JVC 6.5" 100W Speakers
This JVC 4-channel amplifier is the durable and powerful product you need to give your system a much needed boost. This amplifier is certified waterproof, dustproof, rustproof, and vibrationproof. A Drain Tunnel Structure is employed for creating a gap between the amplifier and the installation surface. This prevents saltwater and sand from accumulating on the bottom, increasing corrosion protection. Thicker terminal connection points and increased wire size enables maximum current flow and higher output for better low frequency response and cleaner output, resulting in powerful bass reproduction. Magnetic Shielding for the output coils reduce radiated noise, delivering smooth and accurate sound. The Bluetooth antenna housed inside the remote control provides more sensible range for device connectivity, ensuring uninterrupted music playback.
General Features:
- Compact 4CH Digital Amplifier for Car, Marine, UTV and Motorcycle
- 600W Max Power
- 50W RMS Power x 4 @ 4 ohms
- Waterproof IPX7/IPX6
- Dustproof IP6X
- Rustproof ASTM B117
- Vibrationproof
- High-Quality Capacitors
- Waterproof Bluetooth Remote Control
- Frequency response (+0, –3dB): 10Hz–20kHz
- Signal to noise ratio: 89dB
- Low pass filter frequency (–12dB/oct.): 50Hz–200Hz (variable)
- High pass filter frequency (–12dB/oct.): 50Hz–200Hz (variable)
- Preout: 5V (Max)
- Rated Power Output - Stereo (4Ω): 50W x 4 (20Hz–20kHz, ≤1.0% THD)
- Rated Power Output - Stereo (2Ω): 75W x 4 (1kHz, ≤1.0% THD)
- Rated Power Output - Bridged (4Ω): 150W x 2 (1kHz, ≤1.0% THD)
UPC Code 046838001918
These JVC 6.5" speakers are perfect for ATV, UTV, Wave Runners, Motorcycle, and Golf Carts. They are suited and designed for any outdoor application! The waterproof polypropylene cone and durable rubber surrounds will stand up to the open-environment through prolonged use. With an attached, rugged UV-resistant grille you can be sure that the speakers will be well protected.
General Features:
- 6-1/2 inch 2-Way Marine/Motorsports Speakers
- Multi-Purpose Rugged Design
- Injected Polypropylene Waterproof Woofer Cone
- Durable Rubber Surround
- 1/2“ Grille Mounted Balanced PEI Dome Tweeter
- Rugged UV Resistant ABS Integrated Grille*
- ABS Composite Speaker Basket
- EVA Foam Mounting Gasket
- Stainless Steel Mounting Hardware
- Peak Power: 100W
- RMS Power: 30W
- Sensitivity: 87dB/W @ 1m
- Frequency Response: 60Hz - 20,000Hz
- Nominal Impedance: 4 Ohms
- Hole Cutout Diameter: 5 Inches
- Mounting Depth: 2-5/16 Inches
- Integrated Grilles are Not Removable
UPC Code 046838003097
The Power Sport Motorcycle Universal Amplifier Wiring Kit includes the following 6 foot length of red and black T-Spec OFC power and ground wire with a T-Spec V8MANL fuse holder, 60 amp fuse protected by a black nylon braid, Pre-terminated ring terminals, (2) 4 foot pieces of 16 gauge OFC speaker wire protected by black nylon mesh and 4"x6" hook and loop mounting pad for micro-amplifiers.
Amplifier Wiring Kit:
- Designed tor motorcycles
- 6 feet of red and black T-Spec OFC power and ground wire with a T-Spec V8MANL fuse holder and 60 amp fuse protected by a black nylon braid
- Pre-terminated ring terminals make connections to the battery simple
- Two 4 foot pieces of 16 gauge OFC speaker wire protected by black nylon mesh makes upgrading the factory speaker wires or adding new speakers a smart choice
- Upgrading Harmon Kardon System – Two 47-ohm .5 watt resistors to keep the factory radio outputs active
- All the necessary installation hardware is included along wtth a 4 × 6 inch hook and loop mounting pad for micro-amplifiers to hold the amplifier securely in place
UPC Code 086429332267
