Marine Audio MA112 2.8" Color TFT Display USB Bluetooth Marine Stereo Receiver, 4x Infinity 6.5" Premiun 2-Way Coaxial 300 Watt Peak Power White Marine Speakers

Gain control over a whole new world of media options with this Marine Audio compact marine stereo. This stereo comes packed with an array of features to keep the music bumping for as long as you want! Built-in Bluetooth, a classic AM/FM tuner, and a USB input makes streaming and handheld device connection a breeze. This stereo is rated IPx6 so you can rest assured that it will stand up to the open-environment. A 2.8" color TFT display with white LED backlighting gives you a bright and intuitive front panel that is easy to use.

General Features:

• 2.8" color TFT display with White LED backlighting
• 12V DC (2-wire)
• Dimmable LED backlit control
• Illumination control (day and night)
• Maximum power output: 160 watts (40W x 4)
• Waterproof IPx6
• AM/ FM Tuner with 36 presets (18AM, 18 FM)
• Bluetooth audio (Supports A2DP and AVRCP)
• 1A USB charging capability
• Rear (RCA) auxiliary audio input
• Rear (RCA) auxiliary audio output (2 volt)
• 4-Channel amplified audio output
• UV and corrosion resistant
• Low battery warning
• Power: 12vDC
• Operating voltage range: 10-16vDC
• Current Draw: 145mma - idle
• Current Draw: 1Amp - Nominal
• Current Draw: 8.5Amp - Maximum
• Operating Temperature Range: -4°F to 158°F
• Overall Dimensions: 4.5in H x 4.5in L x 4.4in D
• Output power RMS: 15 watt x 4
• Output power Maximum: 40 watts x 4
• Total Harmonic Distortion: 1%

These Infinity's Kappa Marine loudspeakers leverage Infinity’s world class audio engineering and music reproduction with purpose-built marine loudspeakers that will survive the rigors of the harsh marine environment. These 6-1/2" coaxials feature Plus One polypropylene woofer and midrange cones, Mylar tweeter domes, one piece cast polymer baskets, sealed magnets, and rubber woofer surrounds for high SPL performance. These speakers are UV resistant in a marine grade IPX3(IPX5 from front) weather resistant and include RGB perimeter illumination and go through 300 hours of salt spray testing.

General Features:

• Power Handling: 100 watts RMS, 300 watts peak power
• Sensitivity: 92dB at 2.83 volts
• Frequency Response: 40 - 25kHz
• Voice Coil Diameter: 1 in. (25.5mm)
• Impedance: 3 ohm impedance
• Plus One Woofer Cones
• Perimeter RGB Illumination
• One Piece Polymer Basket
• Mylar Tweeters
• Harman Standard Reliability Testing