JBL Celebrity150 1DIN Bluetooth Receiver, 2x 4x6" 150W Max Speakers, Amplifier
JBL Celebrity150 Single DIN Bluetooth FM Radio USB/AUX SD Card High Power Mechless with F/R and Sub output Car Media Receiver
JBL Celebrity 150 Headunit is Single-Din, Mechless Car Media player with Detachable face, perfect to fit JBL speaker products as a bundled audio system. Multiple playback options like Bluetooth, USB, AUX in, SD Card, and FM Radio allows you choose freely for your favorite listening source.
General specification:
- Power supply: 12 V DC on-board network
- Rated Output Power: 4 x 50W peak
- Fuse rating: 10A
- Frequency response: 20 Hz - 20 kHz
- Bluetooth Operating range: up to 10 m
- Bluetooth Supported profiles: HFP, HSP, A2DP, AVRCP
- FM Radio Frequency coverage: 87.5 - 108MHz
- Installation dimensions (W x H x D): 178 x 50 x 87mm
What’s in the Box
- JBL Celebrity 150 Headunit
- 2x ISO Wiring harness
- 2x Removal tools
- 4x Face-fixing screws
- 1x OM
- 1x Safety Sheet
Features:
- 1 Din Mechless Car Media player with Detachable face
- Multiple Playback Sources: Bluetooth, USB, AUX in, SD Card, FM Radio
- Wireless Bluetooth Streaming
- 30 Preset stations (18 FM / 12 AM)
- RCA Line Output (2 pairs; 4-volt)
- 4x50 Watts Maximum Power Output
- ISO Connector (wiring harness included)
UPC Code 050036396912
Kicker 46CSC464 4x6" 150 Watts Peak Power 2-Way Coaxial 4 Ohm Car Audio Speakers (Pair)
These CS Series speakers deliver remarkable performance and ultra-clean bass, utilizing a heavy-duty motor/magnet structure featuring EVC (Extended Voice Coil) technology not found in stock speakers. They use polypropylene cones with tough, ribbed, UV-treated surrounds for precise linear excursion and reliability. The CS-Series design features near-zero tweeter protrusion, so your speakers fit perfectly behind factory grilles. This simple, drop-in solution delivers acclaimed KICKER performance with a stamped-steel framework, rigid polypropylene cone and EVC (Extended Voice Coil) technology. You get superb clarity, durability and volume – now and way down the road! These CS speakers work best with 50 watts of recommended power.
General Features:
- Fits nearly every car made
- Zero-protrusion tweeters to fit nearly any factory depth
- Woofer EVC (Extended Voice Coil) tech assists with precise linear excursion
- UV-treated poly-foam surround resists heat or direct sunlight
- Large woofer magnet in a heavy-duty motor for ultra-clean bass
- PEI-tweeter construction provides superb clarity
- Neodymium tweeter magnets allow for increased volume in high frequencies
- Speaker Design: 2 - way
- Woofer Size [ in, mm ]: 4x6 [100x160]
- Tweeter Size [ in, mm ]: 1/2 [13]
- DC Resistance [ ohm ]: 3.3
- Peak Power [ watts, per ANSI/CTA-2031-A ]: 150
- Recommended Amplifier Power [ watts RMS ]: 50
- Sensitivity - SPLo [ dB @ 1W, 1m ]: 88
- Effective Frequency Range [ Hz ]: 50-20k
- Mounting Hole Diameter [ in, mm ]: 4 x 6, 101x152
- Top Mount Depth [ in, mm ]: 1 11/16, 43
- Bottom Mount Depth [ in, mm ]: 2, 50
- Tweeter Protrusion [ in, mm ]: 0
- Grilles: No
- Tweeter Magnet Material: Neodymium
- Tweeter Dome Materia: PEI [polyether imide
- Tweeter Design: Balanced dome
- Woofer Cone Material: Polypropylene
- Woofer Surround Material: Polyester foam
UPC Code 713034088349
Infinity Alpha 1302A 65W RMS x 2 @ 4 Ohms 2-Channel Class AB Car Amplifier
Alpha 1302A Car Amplifier provides 500 Watt peak max at 4 Ohms featuring 2 Channel, Class AB, adjustable high-pass or low pass crossover filters with auto turn on. Reliable Performance efficient cooling design and power sound.
General Features:
- Alpha 1302A Car Amplifier
- 2 Channel
- Class AB
- Max Output: 500 Watts Peak Bridged at 4 Ohms
- Max Output: 150W x 2 at 4 Ohms
- RMS Ouput: 65W x 2 at 4 Ohms
- RMS Output: 85W x 2 at 2 Ohms
- RMS Ouput: 170W x 1 at 4 Ohm Bridged
- SN Ratio: 75 dB
- Frequency Response: 10Hz-45Khz
- Adjustable High-Pass/Low Pass Crossover Filter
- Fuse Rating: 30 x 1
- Operating Voltage: 9V - 16V
- Recommended Wire Gauge: 8
- Dimensions: 10-1/4" x 2-3/16" x 8-1/8"
- Weight: 2.09 kg
UPC Code 050036392914
Enrock 8 Gauge Amplifier Wiring Installation Kit
The Enrock 8-Gauge Amplifier Installation Kit makes installing your brand new sound system in your car or truck much easier. It includes all of the cables, wires, tubing, ties, grommets and ring terminals that you will need in order to get your new sound system up and running. The car amp install kit works with a wide range of sound systems and car types and it makes the installation process easy.
General Features:
- 20 ft. 8 GA Red Power Cable.
- Competition High Quality Fuse Holder.
- 1/4" Ring Terminal.
- 3 ft. 8 GA Black Ground Cable #10 Ring Terminal.
- 16 ft. 18 GA Blue Turn-On Wire.
- 20 ft. High Performance RCA (TRCA) Interconnect (3) Rubber Grommets.
- 30 ft. Speaker Wire 5/16" Ring Terminal.
- 6 ft. Split Loom Tubing (20) 4" Wire Ties.
UPC Code 728120451105
1 Year Manufacturer Warranty
