Sony MEX-DV2100 CD Receiver, 12” 1350W Subwoofer, Mono Amplifier, Wiring Kit
This Sony MEX-DV2100 receiver is the perfect product to take your vehicle's factory sound system to the next level. This receiver provides you with FM radio, CD playback and MP3 playback in a stylish and sleek single DIN chassis. The AUX input will allow you to connect your preferred handheld device to the radio for even more media and listening options!
General Features:
- AUX IN
- DVD+R/DVD+RW PLAYBACK: yes
- DVD VIDEO PLAYBACK: yes
- VCD/CD/CD-R/CD-RW PLAYBACK: yes
- MPEG1/2: yes
- JPEG: yes
- DVD-VR/DVD+VR PLAYBACK: yes
- MP3: yes
- DVD-R/DVD-RW PLAYBACK: yes
- FM Radio
- PREOUT OUTPUT LEVEL (V): 4
- MAXIMUM OUTPUT POWER (4?, 1KHZ) (W): 52
- MOUNTING DIMENSIONS (WXHXD) (MM): 182 x 53 x 162
- DIMENSIONS (WXHXD) (MM): 178 x 50 x 181
- PREOUT IMPEDANCE (OHMS): 220
- WEIGHT (KG): Approx. 1.4
UPC Code 4905524454673
The JBL Stadium 122SSI 12" component subwoofer is the high-performance bass machine you need to take your audio system to the next level. This subwoofer can pump out 1350 watts of peak power and 450 watts of RMS power for an impressive sonic output. A switch which lets you vary the sub's impedance from 2 ohms to 4 ohms to optimize its effectiveness.
General Features:
- 450 watts RMS (1350 watts peak)
- 12" high-performance car subwoofer
- Glass fiber/paper pulp composite cone
- Nitrile rubber surround
- Stamped steel vented basket
- SSI (Selectable Smart Impedance): 2 or 4 ohms switchable
- Grille not included
UPC Code 050036381185
This JBL Stadium mono amplifier delivers the efficiency and power you expect from Class D amplifiers – and the performance you expect from JBL. The comprehensive all new E.A.R.L terminal and power adapter enables easy installation and optimized performance. The remote bass control allows the user to increase and decrease bass output independent of head unit tone controls. The industrial design not only provides an elegant look, but also enhances power dissipation to ensure long term reliability. Stadium amplifiers give you power to shape your car audio experience in new ways.
General Features:
- High-performance, mono Class D subwoofer amplifier
- Low Distortion
- Full On-Board Protection
- Proprietary High-Conductivity Terminals
- Compact footprint
- Sleek design
- Remote Bass Control
- Operating voltage 9-16 volts
- RMS power @ 4 ohms: 380W
- RMS power @ 2 ohms: 600W
- Total peak power: 1500W
- Frequency response: 10Hz – 320Hz @ -3dB
- Crossover filter: LPF 32Hz – 320Hz, Variable 12dB/Oct
- Bass EQ: 70Hz Fix 0-9dB
- THD + N at rated power: ≤0.1%
- High input maximum signal level: 20V
- High input maximum sensitivity: 2V
- Line input maximum signal level: 2V
- Line input maximum sensitivity: 0.2V
- Line-in signal-to-noise ratio (reference to 1 watt): ≥80dB
- Quiescent current draw: ≤1.7A
- Fuse size: 2 x 35A
In the Box
- 1x Amplifier
- 2x Differential Speaker-Level Adapter
- 2x Spare Fuses
- 4x Philip Screws
- 1x Remote Bass Control & Cable
- 1x E.A.R.L Terminal
- 3x Self-Tapping Screws
- 1x Owner’s Manual
UPC Code 050036356121
The Enrock 8-Gauge Amplifier Installation Kit makes installing your brand new sound system in your car or truck much easier. It includes all of the cables, wires, tubing, ties, grommets and ring terminals that you will need in order to get your new sound system up and running.
The car amp install kit works with a wide range of sound systems and car types and it makes the installation process much simpler by conveniently adding all your supplies to one single kit.
Kit Includes:
- 20 ft. 8 GA Red Power Cable.
- Competition High Quality Fuse Holder.
- 1/4" Ring Terminal.
- 3 ft. 8 GA Black Ground Cable #10 Ring Terminal.
- 16 ft. 18 GA Blue Turn-On Wire.
- 20 ft. High Performance RCA (TRCA) Interconnect (3) Rubber Grommets.
- 30 ft. Speaker Wire 5/16" Ring Terminal.
- 6 ft. Split Loom Tubing (20) 4" Wire Ties.
UPC Code 728120451105
