Enrock EM856 Gauge Style Receiver, 6x 8" 375W Speaker, 4 Channel Amplifier w/Kit
This new Enrock EM856 marine-grade multi-media receiver packs an array of features into a compact gauge-style design, making it the perfect receiver product to boost your marine vehicle's entertainment system to the next level. This receiver features built-in, wireless audio streaming, AUX/USB inputs, and an AM/FM tuner, delivering myriad entertainment and audio possibilities. In addition to these features this receiver has been manufactured to be water-resistant and compact in style and design to you provide you with a durable yet sleek product experience. Trust Enrock with all of your vehicle's entertainment and audiovisual needs!
General Features:
- Marine Multi-Media Receiver
- Compact Gauge-Style Design
- Peak Power: 4 x 40 Watts
- RMS Power: 4 x 25 Watts
- Built-In Amp: 25 W x 4 RMS Power
- Rear USB/AUX Inputs
- USB adapter will charge your phone (charger not included)
- Built-In Wireless Audio Streaming
- 1-Inch Screen Size
- Front/Rear RCA Out
- AM/FM Tuner
- Marine-Grade IP66 Rated
- Water-Resistant
- Frequency Response: 100-10kHz
- Signal to Noise Ratio: 40dB
- U-Bracket and Wiring Harness included
UPC Code 728120513094
JBL Club Marine Speakers are ready for your next outdoor adventure. These fully marinized speakers not only deliver JBL sound, they also provide RGB lighting to bring the sound to life. Engineered to withstand sun, salt, sea spray and wash downs, they feature sealed motor structures, UV resistant one-piece cast-polymer baskets, a sealed magnet and rubber surrounds.
The polypropyelene cone and balanced silk dome tweeter provide great bass, smooth highs and lots of output to ensure every note can be heard loud and clear. With two grille colors included in the box, you can easily match your speaker grilles with your boat.
Club Marine 8" Two-Way Speaker
- Power Handling: 150Wrms, 450W peak
- Sensitivity (@ 2.83V): 92dB
- Frequency Response: 30Hz – 20kHz
- Nominal Impedance: 4ohm
- 2x Full-Range Speakers
- 2x Speaker Grilles, Gloss White
- 2x Speaker Grilles, Satin Grey
- Stainless steel mounting hardware
- Drill bit for easy installation
- Foam gasket
- 2x Speaker Pigtail Harness
- 2x RGB Pigtail Harness
- 2x JBL sticker
- Quick Start Guide
UPC Code 050036390446
Infinity M704A 4-Channel amplifier features selectable all high or low-pass crossovers with variable electronic frequency adjustment for precision system tuning. Engineered for harsh marine conditions with power and performance to meet the needs of any outdoor audio system. Max Power - 1000 Watts Peak
Amplifier:
- 4 Channel Marine Amplifier
- Class D Technology
- Max Power - 1000W Peak
- Power Output, 2Ω - 100W RMS x 4
- Power Output, 4Ω - 70W RMS x 4
- Power Output, 4Ω Bridged - 200W RMS x 2
- Signal-to-Noise Ratio - ≥85dB
- High and low level inputs
- Variable crossovers and bass boost
UPC Code 050667372729
Power your marine amplifier with a wiring kit that can withstand the harsh environment and still deliver full sound performance. Fully tinned wiring ensures that these amp kits won’t corrode or oxidize and turn green after a season on the water. Oxygen-free copper provides a reliable connection with maximum conductivity. By using 100% virgin copper the tin won’t flake off, something commonly seen when using recycled copper materials. While it is also common to tin just the tips of the wire for cost savings, this practice does not actually provide any benefits. Metra’s amp kits use fully tinned copper wire from top to bottom that can withstand a harsh marine environment and salty air. The ignition-protected 50-amp circuit breaker is IP67 rated with stainless steel connection points for corrosion resistance
Amplifier Wiring Kit:
- Marine compliant amplifier wiring kit
- Fully tinned 100% virgin copper wire
- BC5W2 marine compliant jacket
- 50-amp marine circuit breaker is rated IP67 with stainless steel connection points for corrosion resistance
- Easy to solder tinned wiring
- Connectors, ring terminals, and wire ties included
What’s in the box:
- (1) 8-gauge tinned oxygen-free copper side-by-side red power and yellow ground wire (10ft.)
- (1) 18-gauge tinned oxygen-free copper blue remote turn-on wire (18ft.)
- (2) 8-gauge ring terminal with shrink tube and logo, pre-terminated on each end of the 2ft. red wire
- (1) 8-gauge ring terminal with shrink tube and logo, pre-terminated on 8ft. red wire
- (1) 8-gauge ring terminal with shrink tube and logo, pre-terminated on yellow wire
- (1) Ignition protected circuit breaker (50-amp)
UPC Code 086429416820
A ground-breaking virgin-PVC, Hyper-Flex insulation and multi-strand construction allows you to bend, twist, and contort the cable in any way imaginable for an ultimate installation experience while delivering maximum current flow; remains ultra-flexible under hot or cold temperature extremes; transfers the cleanest audio signal possible by using tightly twisted, silver-tinned OFC copper conductors; zip line to easily remove outer insulation.
Speaker Wire:
- 20 Feet
- 16 Gauge
- Silver-tinned OFC (oxygen-free copper)
UPC Code 632016086404
The Universal USB/3.5mm Auxiliary Interface Mount and Cable measures 10 feet in length and will convert your AUX inputs to USB.
AUX/USB Adaptor:
- USB to RCA pass-through extension cable
- Cable Length: 3m (10ft)
UPC Code 799861390145
