Marine Audio MA112 2.8" Color Display Stereo USB Bluetooth Marine Receiver, 4x Infinity 6.5" Coaxial 225W Waterproof Titanium LED Boat Speakers, 4-Channel Amplifier w/ Wiring Kit, USB/AUX Interface

---

Gain control over a whole new world of media options with this Marine Audio compact marine stereo. This stereo comes packed with an array of features to keep the music bumping for as long as you want! Built-in Bluetooth, a classic AM/FM tuner, and a USB input makes streaming and handheld device connection a breeze. This stereo is rated IPx6 so you can rest assured that it will stand up to the open-environment. A 2.8" color TFT display with white LED backlighting gives you a bright and intuitive front panel that is easy to use.

General Features:

• 2.8" color TFT display with White LED backlighting
• 12V DC (2-wire)
• Dimmable LED backlit control
• Illumination control (day and night)
• Maximum power output: 160 watts (40W x 4)
• Waterproof IPx6
• AM/ FM Tuner with 36 presets (18AM, 18 FM)
• Bluetooth audio (Supports A2DP and AVRCP)
• 1A USB charging capability
• Rear (RCA) auxiliary audio input
• Rear (RCA) auxiliary audio output (2 volt)
• 4-Channel amplified audio output
• UV and corrosion resistant
• Low battery warning
• Power: 12vDC
• Operating voltage range: 10-16vDC
• Current Draw: 145mma - idle
• Current Draw: 1Amp - Nominal
• Current Draw: 8.5Amp - Maximum
• Operating Temperature Range: -4°F to 158°F
• Overall Dimensions: 4.5in H x 4.5in L x 4.4in D
• Output power RMS: 15 watt x 4
• Output power Maximum: 40 watts x 4
• Total Harmonic Distortion: 1%

UPC Code 681787024368

---

Infinity Reference Marine Speakers are ready to take on your next outdoor adventure. These fully marinized speakers not only deliver Infinty sound, but they also feature RGB lighting to bring the sound to life. Engineered to withstand sun, salt, sea spray and wash downs, they feature sealed motor structure, UV resistant one-piece cast-polymer baskets, a sealed magnet and rubber surrounds. The polypropyelene cone and balanced dome tweeter provide great bass, smooth highs and lots of output to ensure every note can be heard loud and clear.

6.5" LED Speakers:

• 6.5" Two-Way Marine Multi-Element speaker
• Seven color multi-color RGB LED lighting
• Power Handling 75W RMS, 225W peak
• Sensitivity: 92dB
• Frequency Response: 50Hz- 20kHz
• Impedance: 4 ohms
• IPx5 Rated

UPC Code 050667372927

---

This new weather-resistant amp; high-performance JBL Marine MA704 amplifier delivers impressive power from a compact chassis designed to withstand outdoor environments. With 4-channel outputs, this JBL Marine amplifier incorporates our latest amplifier topology that includes selectable all-, high-, or low-pass crossovers with variable electronic frequency adjustment for precision system tuning. Engineered for harsh marine conditions, with power and performance to meet the needs of any outdoor audio system, this amplifier is the perfect match for all of your JBL marine products.

Amplifier:

• 4 Channel Marine Amplifier
• Class D Technology
• Max Power - 1000W Peak
• Power Output, 2Ω - 100W RMS x 4
• Power Output, 4Ω - 70W RMS x 4
• Power Output, 4Ω Bridged - 200W RMS x 2
• Signal-to-Noise Ratio - ≥85dB
• High and low level inputs
• Variable crossovers and bass boost

UPC Code 050036346320

---

The Universal USB/3.5mm Auxiliary Interface Mount and Cable measures 10 feet in length and will convert your AUX inputs to USB.

AUX/USB Adaptor: 

• USB to RCA pass-through extension cable
• Cable Length: 3m (10ft)

UPC Code 799861390145

---

The Power Sport Motorcycle Universal Amplifier Wiring Kit includes the following 6 foot length of red and black T-Spec OFC power and ground wire with a T-Spec V8MANL fuse holder, 60 amp fuse protected by a black nylon braid, Pre-terminated ring terminals, (2) 4 foot pieces of 16 gauge OFC speaker wire protected by black nylon mesh and 4"x6" hook and loop mounting pad for micro-amplifiers.

Amplifier Wiring Kit:

• Designed tor motorcycles
• 6 feet of red and black T-Spec OFC power and ground wire with a T-Spec V8MANL fuse holder and 60 amp fuse protected by a black nylon braid
• Pre-terminated ring terminals make connections to the battery simple
• Two 4 foot pieces of 16 gauge OFC speaker wire protected by black nylon mesh makes upgrading the factory speaker wires or adding new speakers a smart choice
• Upgrading Harmon Kardon System – Two 47-ohm .5 watt resistors to keep the factory radio outputs active
• All the necessary installation hardware is included along wtth a 4 × 6 inch hook and loop mounting pad for micro-amplifiers to hold the amplifier securely in place

UPC Code 086429332267