JVC KD-XD28BT 1 DIN Stereo AUX USB Receiver,6.5" Speakers,4CH Amp,Adapters,Kit
This JVC KD-X280BT Car Stereo receiver with LCD display features an AM/FM tuner, detachable face, USB 1.5A Connection Charges devices quickly, Powerful 50 Watts per channel Amplifier, Front AUX input, Plays MP3, WMA, WAV, ACC, and high-res FLAC files, built-in Bluetooth for audio streaming and hands-free calling (mic included), control 2 phones at once, voice recognition dialing, wirelessly control PANDORA and Spotify from your Android device, Plays USB memory devices, 13-band equalizer with digital time alignment, K2 technology improves the digital sound for most music sources, sound-shaping tools get more out of your digital music library, No CD player
General Features:
- 13-band equalizer with digital time alignment
- AM/FM tuner
- built-in Bluetooth for audio streaming and hands-free calling
- Volume Link EQ - boosts frequencies in the music that are affected by road noise.
- JVC Remote App Compatibility- remote optional RM-RK52
- steering wheel remote control ready
- USB/AUX ports
- 50 Watts per channel Amplifier
- 2 Phones Full-Time Connection
- Low Battery Information
- Time Alignment
- Space Enhancement
- Sound Response
- Sound Lift
- Short Chassis
UPC Code 046838002427
These JVC CS-DF620 6.5" coaxial speakers will pump out clear and impressive sound and match all of the audio needs of your vehicle infotainment system. These drvn DF series speakers combines powerful sound reproduction with a tough looking design. These speakers feature hybrid surrounds with increased mobility, which enables high efficiency and improved follow-up to audio signals. The speakers flaunt 25 watts of RMS power and 300 Watts of peak power handling, ensuring a powerful sonic output.
General Features:
- 6.5" 2-Way Coaxial Speakers
- RMS Power Handling: 25W
- Peak Power Handling: 300W
- 4 Ohm Impedance
- Diaphragm: PP Injection Cone
- Surround: Hybrid Surround (Rubber & Cloth)
- Magnet: Ferrite
- 1" Balanced Dome Tweeter
- Frequency Response: 70 - 19,000Hz
- Sound Pressure Level: 86dB
UPC Code 046838081583
Enrock's EEA720.4 4-channel amplifier was designed compact yet rugged. The outdoors can be a tough spot for audio gear so Enrock considered the salt, spray and sunlight when designing this Class D amplifier. With 45 watts RMS per channel this amplifier will drive your speakers no matter the application you are using it for. It’s compact enough for a bike and powerful enough for a car. You’ll have no trouble hearing your tunes over the wind and waves with this powerful amplifier.
Weather Resistant for Marine Application
Durable and Powerful for Automotive Use
Compact and rugged for Off-Road Installation
This compact amplifier will fit into a storage compartment on a boat, motorcycle, ATV, or car with optimal performance, despite its size. Should you decide to add a pair of subwoofers you can bridge this amp to a 2-channel mode and send 120 watts to each subwoofer, or switch to 3-channel mode to get a pair of speakers and a subwoofer. With high-pass and low-pass filters, plus bass boost, you can customize your sound output just the way you take your tunes.
EEA720.4 GENERAL FEATURES:
- 4-channel marine/powersports/ car amplifier
- 45 watts RMS x 4 at 4 ohms (60 watts RMS x 4 at 2 ohms)
- 120 watts x 2 bridged at 4 ohms
- Class D amp technology
- 720 Watts Peak Power
- variable high- and low-pass filters
- Sealed Chassis for use in harsh environments
- Ultra-efficient full range class D operation
- Built-in Crossover- maximum flexibility
- 2 or 4 channel input
- Signal to noise ratio 97db
- High pass filter 120Hz/80Hz
- Input range: 200mV-10V
- Frequency Response: 20Hz to 20KHz
UPC Code 728120454069
This stereo installation kit has been engineered to help you install a 2" tall (Single-DIN) aftermarket radio into the original inner fairing of a HD motorcycle, making radio replacement simple. The kit is designed to match the original look and feel of the inner fairing.
Installing an aftermarket radio can upgrade the sound quality and provide additional features the original factory radio couldn't offer but requires this kit to make it fit. To keep the audio controls on the handlebars working with the new radio, you'll need a handlebar control interface (sold separately).
General Features:
- Stereo installation kit designed to fit any standard 2" tall aftermarket single DIN radio.
- One-piece design fends off moisture and vibration.
- Designed for an original factory-like fit and finish.
- Includes brackets and hardware parts needed with detailed installation instructions.
Applications
- Single DIN radio
- HD FLH 1998-2013 (Batwing fairing) Roadglide 1998-2013 (Sharknose fairing)
UPC Code 728120484431
Enrocks EHDSA98-13 brackets will allow you to install select 6.5" or 6.75" speakers in the factory speaker openings of select 1998 - 2013 Harley Davison Bikes.
General Features:
- 6-1/2" - 6-3/4" Speaker Adapter Plate
- For 1998-2013 (FL models with fairings) Harley Davidson Touring
- Gapless fit between the speaker and the kit
- High-grade ABS plastic construction
- Color: Black
UPC Code 728120484486
The Power Sport Motorcycle Universal Amplifier Wiring Kit includes the following 6 foot length of red and black T-Spec OFC power and ground wire with a T-Spec V8MANL fuse holder, 60 amp fuse protected by a black nylon braid, Pre-terminated ring terminals, (2) 4 foot pieces of 16 gauge OFC speaker wire protected by black nylon mesh and 4"x6" hook and loop mounting pad for micro-amplifiers.
Amplifier Wiring Kit:
- Designed tor motorcycles
- 6 feet of red and black T-Spec OFC power and ground wire with a T-Spec V8MANL fuse holder and 60 amp fuse protected by a black nylon braid
- Pre-terminated ring terminals make connections to the battery simple
- Two 4 foot pieces of 16 gauge OFC speaker wire protected by black nylon mesh makes upgrading the factory speaker wires or adding new speakers a smart choice
- Upgrading Harmon Kardon System – Two 47-ohm .5 watt resistors to keep the factory radio outputs active
- All the necessary installation hardware is included along wtth a 4 × 6 inch hook and loop mounting pad for micro-amplifiers to hold the amplifier securely in place
UPC Code 086429332267
