JVC KD-XD28BT Stereo Receiver, 2x 6.75" 300W Speaker, 2-CH Amp and Accessories
This JVC receiver is the ultimate upgrade for your vehicle's sound system. This receiver comes packed with both CD player functionality and Built-In Bluetooth. And with USB/AUX inputs you wil have additional options when it comes to handheld and phone connectivity. Built-In Amazon Alexa will give you acces to an array of media features including checking the weather, checking the local news, alarm settings, and even checking Wikipedia! The receiver has a bright LCD display and a 2-zone color customization option too.
General Features:
- CD Receiver featuring Bluetooth
- USB/AUX Inputs
- Satellite Radio Ready
- Amazon Alexa
- 13-Band EQ
- JVC Remote App Compatibility
- K2 Technology for Enhanced Digital Sound Quality
- Time Alignment
- Space Enhancement
- Sound Response
- Sound Lift
- Volume Link EQ
- 2 Phone Full Time Connection
- 2-Line VA LCD Display
- 2-Zone Variable-Color Illumination
- High-Current USB Charging
- Remote Control App
- Steering Wheel Remote Control Ready
- AM/FM Radio
- Maximum Power Output: 50W x 4 / 50W x 2 +Subwoofer (4 ohms) 50W x 1
- Installation Size: 7-3/16" x 2-1/16" x 6-3/16" (182 x 53 x 156mm)
UPC Code 046838002878
These CS-Series 6-3/4-inch Coaxial Speakers are the perfect way to upgrade your factory speakers. CS-Series Coaxials deliver remarkable performance and ultra-clean bass with a heavy-duty motor/magnet structure not found in stock speakers. The stamped-steel framework supports a rigid polypropylene cone with EVC™ (Extended Voice Coil) technology for the best sonic quality. Using zero-protrusion PEI tweeters with neodymium magnets, you get the clarity you need without interfering with factory grilles. These CS speakers work best with 100 watts of recommended power.
General Features:
- 2-Way Speaker Design
- 6.75" Woofer Size
- .5" Tweeter Size
- 3.3 Ohms DC Resistance
- 300W Peak Power
- 100W RMS Power
- 90dB Sensitivity
- 40-20kHz Frequency Range
- 5.5" Mounting Hole Diameter
- 3/16" Top Mount Depth
- 1-13/16" Bottom Mount Depth
- Fits nearly every car made
- Zero-protrusion tweeters to fit nearly any factory depth
- Woofer EVC™ (Extended Voice Coil) tech assists with precise linear excursion
- UV-treated poly-foam surround resists heat or direct sunlight
- Large woofer magnet in a heavy-duty motor for ultra-clean bass
- PEI-tweeter construction provides superb clarity
- Neodymium tweeter magnets allow for increased volume in high frequencies
- Steel mesh grilles included for speaker protection
UPC Code 713034088370
Looking to switch to Satellite Radio, now is the time. The SiriusXM connect Vehicle Tuner comes with a three months of service free*. This tuner is easy to use and can give any SiriusXM Ready car stereo crystal clear reception. It is so easy to install you will be setup and ready to go in no time; so you never miss a beat. It comes with a magnetic antenna mount, SiriusXM connect Vehicle Tuner, and an installation guide. This tuner is compatible with many different professional car stereo brands like, Advent, Alpine, Car show, Clarion, Dual, Fusion, Garmin, Jensen, Jensen Heavy Duty, Jensen Marine, JVC, Kenwood, Magnadyne, Panasonic, Pioneer, Polk, Rockford Fosgate, Rosen, Sony, West Marine, and Xite Solutions. See above pictures for a complete list of compatible stereo models. *See complete details on the SiriusXM website.
General Features:
- Satellite Connect vehicle tuner with 25 ft cable
- Satellite antenna with 23 ft cable
- works only with in-dash receivers with the Satellite Ready logo
- TuneMix and SportsFlash
- pause, rewind, and replay up to 60 minutes of live satellite radio broadcasts
- game, song, and artist alerts
- Satellite Xtra Channels
UPC Code 884720013164
The BC-HDSWC-WR Harley-Davidson Handlebar Control allows installers to replace the radio in a motorcycle, while retaining the use of the factory handlebar audio controls. This easy-to-install interface uses a patented Auto-Detect system to configure itself for the specific motorcycle application and aftermarket radio being installed. The interface provides wires for front speakers, constant power, switched power and ground, and includes a water-resistant enclosure. This product works with the 95-HDIF2 Harley-Davidson Road Glide FLT/Sharknose fairing (sold separately). It can be made to work with all models by pairing with Metra’s BC-9725 Amp Bypass Harness.
General Features:
- Retains the factory handlebar audio controls
- Auto-Detect configures itself for the specific motorcycle application and aftermarket radio
- Comes with a plug-n-play harness in a water-resistant case
- Provides wires for speakers, constant power, switched power and ground
- Use the BC-9711 to retain rear speakers
- This part number replaces the HD-ASWC-1
Note:
- Fits Harley-Davidson FLH & FLT 1998-2013 (FL models with a fairing)
- Must be without factory amplifier, 2 speaker systems only
UPC Code 086429415762
Enrocks EHDRAB98-13 allows you to install a single din receiver into your Harley Touring Bike. The wire harness is included with the dash kit to make wiring more convenient.
General Features:
- Single DIN radio provision
- For Harley Davidson (FL models with fairings) Touring 1998-2013
- Gapless fit between the dash and the kit
UPC Code 728120484431
Enrocks EHDSA98-13 brackets will allow you to install select 6 1/2" or 6-3/4" speakers in the factory speaker openings of select 1998 - 2013 Harley Davison Bikes.
General Features:
- 6-1/2" - 6-3/4" Speaker Adapter Plate
- For 1998-2013 (FL models with fairings) Harley Davidson Touring
- Gapless fit between the speaker and the kit
- High-grade ABS plastic construction
- Color: Black
UPC Code 728120484486
The Apex Series PA1502 powersports amplifiers deliver efficient Class D power, from an ultra-compact chassis, designed to fit into tight spaces and withstand outdoor environments without missing a beat. Available with 2-channels of output power, the Apex Series PA1502 includes selectable electronic crossover frequency adjustment, with lo-pass capability & selectable bass boost, for quick and easy installation. Plus, it has been engineered for harsh conditions, with power and performance to meet the needs of most audio systems making it the perfect match for all of your JBL car, marine and powersports products.
General Features:
- Max Power: 750W peak
- RMS Power Output @ 2Ω (full-range): 150W x 2, <1% THD+N
- RMS Power Output @ 4Ω (full-range): 100W x 2, <1% THD+N
- RMS Power Output @ 4Ω Bridged (full-range): 300W x 1, <1% THD+N
- Selectable all-/hi-/lo-pass filter: 60-, 80-, 120Hz @ 12dB/octave
- Selectable bass boost: 0-, 6-, 12dB @45Hz
- Frequency Response: 20Hz – 20kHz
- Signal-to-Noise Ratio (full-range): >75dB (ref 1W output @ 4Ω)
- Fuse rating: 25A
- Ultra-compact Aluminum Chassis
- Conformal-Coated PCB
- Big Dynamic Power
- Full-Range Outputs and Selectable
- Crossovers
- High- and low-level inputs
- Harman Standard Reliability Testing
- JBL Industrial Design
UPC Code 050036359115
The Power Sport Motorcycle Universal Amplifier Wiring Kit includes the following 6 foot length of red and black T-Spec OFC power and ground wire with a T-Spec V8MANL fuse holder, 60 amp fuse protected by a black nylon braid, Pre-terminated ring terminals, (2) 4 foot pieces of 16 gauge OFC speaker wire protected by black nylon mesh and 4"x6" hook and loop mounting pad for micro-amplifiers.
Amplifier Wiring Kit:
- Designed tor motorcycles
- 6 feet of red and black T-Spec OFC power and ground wire with a T-Spec V8MANL fuse holder and 60 amp fuse protected by a black nylon braid
- Pre-terminated ring terminals make connections to the battery simple
- Two 4 foot pieces of 16 gauge OFC speaker wire protected by black nylon mesh makes upgrading the factory speaker wires or adding new speakers a smart choice
- Upgrading Harmon Kardon System – Two 47-ohm .5 watt resistors to keep the factory radio outputs active
- All the necessary installation hardware is included along wtth a 4 × 6 inch hook and loop mounting pad for micro-amplifiers to hold the amplifier securely in place
UPC Code 086429332267
Protect your new radio from the dirt and weather found on the open road with this handy Radio Shield. The cover's frame fits in your bike's single-DIN opening, and you can then push the cover over your receiver. A unique O-ring seals the cover tightly around your receiver, so you can stop worrying about dust and water getting into the electronics.
UPC Code 810126530271
