JVC AUX USB Bluetooth Receiver, 4x 6.5" Coaxial Speakers, 4CH Amp, Wiring Kit
Stream music from your Android phone every day. JVC's KDX380BTS digital media receiver is the ideal solution for an everyday driver. Built-in Bluetooth connectivity for hands-free calling, a front USB port, and an aux input make playing music from your phone quick and satisfying. Streaming isn't your thing huh? If not you can add a SiriusXM satellite radio tuner (sold separately) for loads of entertainment options.
General Features:
- Bluetooth
- AUX/USB Inputs
- 13-Band EQ
- 2-Zone Variable-Color Illumination
- JVC Remote App Compatibility
- 4.0V High-Voltage 3 Pre-Outs
- Space Enhancement
- Sound Response
- Sound Lift
- Audio Streaming & Control
- iPhone Bluetooth Automatic Pairing
- 2-Line VA LCD Display
- High Current 1.5A Charging
- Satellite Radio Ready
- Wired Remote Control (Optional)
- Steering Wheel Remote Control Ready
- AM/FM Tuner
- 18FM, 6AM Preset Stations
- MP3/WMA/WAV/AAC/FLAC Playback
UPC Code 046838002908
JVC CSDR162 drvn DR Series 6.5" 2-way car speakers feature a horn ring sound enhancer, which improves mid-high frequency sound character, full cover grill design protects the woofer and tweeter in open installations, Lightweight PP + Mica Cone Material provides highly responsive, clear and undistorted sound. Works best at 50 Watts (300W Max) of recommended power.
General Features:
- 6.5" Speakers with Grill
- PP+ Mica Cone
- Horn Ring Sound Enhancer
- Frequency Response 88 - 22,000Hz
- Power Handling Capacity (RMS): 50W
- Power Handling Capacity (Peak Power): 300W
- Impedance: 4 ohms
- Sound Pressure Level: 88 dB
- Diaphragm: PP;Balanced Dome
- Surround: Cloth
- Magnet: Ferrite; Neodymium
UPC Code 046838079214
This JVC KS-DR1004D marine 4-Channel amplifier has a maximum power output of 400 watts and flaunts Class D amplification technology, providing you with a powerful interface for your vehicle's audio system. A conformal coating is a protective chemical coating to safeguard electronic circuits from harsh environments that may contain moisture or chemical contaminants. It provides a barrier to airborne contaminants from the operating environment, such as salt-spray, thus preventing corrosion. Separated circuit boards of the Pre-amp and Power-amp sections contribute to a reduction in radiation noise.
General Features:
- 4-Channel Marine Amplifier
- Conformal Coated Circuitry
- Circuit Separation Construction
- Large LPF Coil
- Variable High/Low-Pass Filter
- 400W Maximum Power Output
- RMS Power Output (4 ohm) [ 1% THD 14.4V]: 45W x 4 (20 - 20,000Hz)
- RMS Power Output (2 ohm) [ 1% THD 14.4V]: 45W x 4 (1,000Hz)
- RMS Power Output (Bridged 4 ohm) [ 1% THD 14.4V]: 90W x 2 (1,000Hz)
- Class D
- Signal-to-Noise Ratio (reference: 1W into 4 ohms): >82dB
- CEA-2006 Compliant
- Load Impedance Allowance: 2 - 8 Ohms
- HPF: 50Hz - 200Hz (-12dB/oct)
- LPF: 50Hz - 200Hz (-12dB/oct)
- RCA Input: Ach L/R, Bch L/R
- High Level Input (Speaker Level Input): Yes
- High Level Input Auto Power Control (Signal Sensing Turn On): Yes
- Input Sensitivity: .2 - 5V
- Dimensions (W x H x D): 5-11/16" x 1-3/4" x 3-7/8"
UPC Code 046838079245
Renegade REN10KIT 10mm^2 Car Audio Complete Amplifier Installation Wiring Kit
General Features:
- 1 x 10 mm^2 Power Wire (red), flexible Strands (0,15 mm), 5 m
- 1 x 10 mm^2 Ground Wire (grey), flexible Strands (0,15 mm), 0.8 m
- 1 x RCA Stereo Audio Cable (blue), double shielded, 5 m
- 1 x 0.5 mm^2 Remote Wire, 5 m
- 1 x AGU Fuse Holder with 40 A ANL Fuse
- Installation Kit
Installation Instructions:
- Disconnect at first the negative ground connection from the vehicle’s battery.
- Connect the GROUND CABLE (brown, 0.8m) with the ground terminal of the amplifier and a suitable GROUND contact point on the car chassis, with a maximum distance of 1 meter from the amplifier. Use the ringterminal for the GROUND contact point. Ensure that all paint or other insulation is removed from around the hole area.
- Find a suitable position for the FUSE HOLDER next to the car battery’s PLUS POLE. The maximum distance should not be more than 30 cm. Please ensure, that you don’t damage any parts of the car, like the fuel tank, wires etc.
- Cut off a part of the POWER CABLE (red, 5m) on one end, which has the same length like the distance from the battery’s PLUS POLE to the FUSE HOLDER (max. 30cm). Connect this part on the end without ringterminal with the FUSE HOLDER (without inserted fuse) and the other end to the battery’s PLUS POLE. Use for the connection the supplied ring terminals.
- Lead one end of the POWER CABLE (red) from the car battery area through the car to the +12V terminal of the amplifier and connect it. Then connect the other end of the cable with the FUSE HOLDER at the suitable terminal.
- Lead the RCA/CINCH CABLE pair with attached REMOTE WIRE from the HEAD UNIT through the car to the amplifier’s position. Then connect the RCA/CINCH plugs on one end with amplifier, and the other end with the HEAD UNIT RCA/CINCH outputs. Please observe the correct polarity of all connections.
- Connect the one end of the attached REMOTE WIRE with the REMOTE/REM terminal of the HEAD UNIT and the other end with the REMOTE/REM terminal of the amplifier. This wire provides a turn on/turn off signal to the amplifier, when the HEAD UNIT is turned on / turned off. NOTE: some amplifier types may require, that you have to extend the REMOTE WIRE with a suitable cable, to lead the REMOTE WIRE to the other endpanel of the amplifier.
- At least insert the FUSE into the FUSE HOLDER. Ensure not to cause a short circuit, or your car’s electric system may get damaged. Do not touch the bare metal parts of the cable or the car battery, otherwise a risk of electric shock consists. Then re-connect the negative ground connection to the vehicle’s battery.
UPC Code 854932002478