Kenwood KMR-D382BT Single DIN USB Bluetooth CD Player Receiver, 4-Channel Amplifier w/Wiring Kit, 6.5" 300W 2-Way Speakers (Pair) w/Adapters, Handlebar Control Kit, 98-2013 Harley Stereo Install Kit

---

Hook up this Kenwood marine receiver to your vehicle's sound system and gain control over a whole new world of features and media options all packed into a compact and sleek chassis. The KMR-D382BT receiver features built-in Bluetooth for easy streaming, AUX and USB inputs for an easy wired connection to your handheld, and a classic CD player for whenever you want to pop in a disc and bump your favorite tunes. With the Kenwood Remote App you'll be able to control most basic functions of the receiver over Bluetooth connection. With a conformal coated circuit board you know this system will hold up in the open-environment!

General Features:

• 255 Segment 1.5 Line Text Display
• Bluetooth Direct Access Button
• Variable Color Illumination
• 13-Band EQ & DTA
• Conformal Coating
• Optional Wired Remote Control Ready
• Front USB & AUX IN
• 3 Preouts 4.0V
• Music Mix
• Dual Phone Connection
• Kenwood Remote App Ready
• FLAC/WAV/MP3/WMA/AAC Compatible
• Android Rapid Charge vis USB Input
• Satellite Radio Ready
• Spanish and French Text Display Options
• CD Playback

UPC Code 019048232564

---

The BC-HDSWC-WR Harley-Davidson Handlebar Control allows installers to replace the radio in a motorcycle, while retaining the use of the factory handlebar audio controls. This easy-to-install interface uses a patented Auto-Detect system to configure itself for the specific motorcycle application and aftermarket radio being installed. The interface provides wires for front speakers, constant power, switched power and ground, and includes a water-resistant enclosure. This product works with the 95-HDIF2 Harley-Davidson Road Glide FLT/Sharknose fairing (sold separately). It can be made to work with all models by pairing with Metra’s BC-9725 Amp Bypass Harness.

General Features:

• Retains the factory handlebar audio controls
• Auto-Detect configures itself for the specific motorcycle application and aftermarket radio
• Comes with a plug-n-play harness in a water-resistant case
• Provides wires for speakers, constant power, switched power and ground
• Use the BC-9711 to retain rear speakers
• This part number replaces the HD-ASWC-1

Note:

• Fits Harley-Davidson FLH & FLT 1998-2013 (FL models with a fairing)
• Must be without factory amplifier, 2 speaker systems only

UPC Code 086429415762

---

Enrocks EHDRAB98-13 allows you to install a single din receiver into your Harley Touring Bike. The wire harness is included with the dash kit to make wiring more convenient.

General Features:

• Single DIN radio provision
• For Harley Davidson (FL models with fairings) Touring 1998-2013
• Gapless fit between the dash and the kit

UPC Code 728120484431

---

These CS-Series 6-1/2-inch Coaxial Speakers are the perfect way to upgrade your factory speakers. CS-Series Coaxials deliver remarkable performance and ultra-clean bass with a heavy-duty motor/magnet structure not found in stock speakers. The stamped-steel framework supports a rigid polypropylene cone with EVC (Extended Voice Coil) technology for the best sonic quality. Using zero-protrusion PEI tweeters with neodymium magnets, you get the clarity you need without interfering with factory grilles. These CS speakers work best with 100 watts of recommended power.

General Features:

• 6.5" 2-Way Design Speaker
• 300W Peak Power
• 100W RMS Continuous Power
• 90dB Sensitivity
• 40-20kHz Effective Frequency Range
• Zero-protrusion tweeters to fit nearly any factory depth
• UV-treated poly-foam surround resists heat or direct sunlight
• Large woofer magnet in a heavy-duty motor for ultra-clean bass
• PEI-tweeter construction provides superb clarity
• Neodymium tweeter magnets allow for increased volume in high frequencies
• Steel mesh grilles included for speaker protection

UPC Code 713034088363

---

Enrocks EHDSA98-13 brackets will allow you to install select 6 1/2" or 6-3/4" speakers in the factory speaker openings of select 1998 - 2013 Harley Davison Bikes. 

General Features:

• 6-1/2" - 6-3/4" Speaker Adapter Plate
• For 1998-2013 (FL models with fairings) Harley Davidson Touring
• Gapless fit between the speaker and the kit
• High-grade ABS plastic construction
• Color: Black

UPC Code 728120484486

---

Renegade REN10KIT 10mm^2 Car Audio Complete Amplifier Installation Wiring Kit

General Features:

• 1 x 10 mm^2 Power Wire (red), flexible Strands (0,15 mm), 5 m
• 1 x 10 mm^2 Ground Wire (grey), flexible Strands (0,15 mm), 0.8 m
• 1 x RCA Stereo Audio Cable (blue), double shielded, 5 m
• 1 x 0.5 mm^2 Remote Wire, 5 m
• 1 x AGU Fuse Holder with 40 A ANL Fuse
• Installation Kit

Installation Instructions:

• Disconnect at first the negative ground connection from the vehicle’s battery.
• Connect the GROUND CABLE (brown, 0.8m) with the ground terminal of the amplifier and a suitable GROUND contact point on the car chassis, with a maximum distance of 1 meter from the amplifier. Use the ringterminal for the GROUND contact point. Ensure that all paint or other insulation is removed from around the hole area.
• Find a suitable position for the FUSE HOLDER next to the car battery’s PLUS POLE. The maximum distance should not be more than 30 cm. Please ensure, that you don’t damage any parts of the car, like the fuel tank, wires etc.
• Cut off a part of the POWER CABLE (red, 5m) on one end, which has the same length like the distance from the battery’s PLUS POLE to the FUSE HOLDER (max. 30cm). Connect this part on the end without ringterminal with the FUSE HOLDER (without inserted fuse) and the other end to the battery’s PLUS POLE. Use for the connection the supplied ring terminals.
• Lead one end of the POWER CABLE (red) from the car battery area through the car to the +12V terminal of the amplifier and connect it. Then connect the other end of the cable with the FUSE HOLDER at the suitable terminal.
• Lead the RCA/CINCH CABLE pair with attached REMOTE WIRE from the HEAD UNIT through the car to the amplifier’s position. Then connect the RCA/CINCH plugs on one end with amplifier, and the other end with the HEAD UNIT RCA/CINCH outputs. Please observe the correct polarity of all connections.
• Connect the one end of the attached REMOTE WIRE with the REMOTE/REM terminal of the HEAD UNIT and the other end with the REMOTE/REM terminal of the amplifier. This wire provides a turn on/turn off signal to the amplifier, when the HEAD UNIT is turned on / turned off. NOTE: some amplifier types may require, that you have to extend the REMOTE WIRE with a suitable cable, to lead the REMOTE WIRE to the other endpanel of the amplifier.
• At least insert the FUSE into the FUSE HOLDER. Ensure not to cause a short circuit, or your car’s electric system may get damaged. Do not touch the bare metal parts of the cable or the car battery, otherwise a risk of electric shock consists. Then re-connect the negative ground connection to the vehicle’s battery.

UPC Code 854932002478

---

Enrock's EEA720.4 4-channel amplifier was designed compact yet rugged.  The outdoors can be a tough spot for audio gear so Enrock considered the salt, spray and sunlight when designing this Class D amplifier. With 45 watts RMS per channel this amplifier will drive your speakers no matter the application you are using it for. It’s compact enough for a bike and powerful enough for a car. You’ll have no trouble hearing your tunes over the wind and waves with this powerful amplifier.

Weather Resistant for Marine Application
Durable and Powerful for Automotive Use
Compact and rugged for Off-Road Installation

This compact amplifier will fit into a storage compartment on a boat, motorcycle, ATV, or car with optimal performance, despite its size. Should you decide to add a pair of subwoofers you can bridge this amp to a 2-channel mode and send 120 watts to each subwoofer, or switch to 3-channel mode to get a pair of speakers and a subwoofer. With high-pass and low-pass filters, plus bass boost, you can customize your sound output just the way you take your tunes.

EEA720.4 GENERAL FEATURES:

• 4-channel marine/powersports/ car amplifier
• 45 watts RMS x 4 at 4 ohms (60 watts RMS x 4 at 2 ohms)
• 120 watts x 2 bridged at 4 ohms
• Class D amp technology
• 720 Watts Peak Power
• variable high- and low-pass filters
• Sealed Chassis for use in harsh environments
• Ultra-efficient full range class D operation
• Built-in Crossover- maximum flexibility
• 2 or 4 channel input
• Signal to noise ratio 97db
• High pass filter 120Hz/80Hz
• Input range: 200mV-10V
• Frequency Response: 20Hz to 20KHz

UPC Code 728120454069