Infinity PRV-315.2 Boat USB Radio, 8" Speakers, Amplifier and Kit, 10" Subwoofer
Infinity PRV315.2 gauge style marine receiver has a waterproof face resistant to rain and splashing with a 3.5" Color-TFT screen display featuring an AM/FM radio tuner with 18 station presets, bluetooth audio streaming, a USB port for charging and playing MP3 audio, video input, 3 pairs of pre-outs including separate subwoofer output and Weatherband radio tuner.
General Features:
- AM/FM Bluetooth Audio Streaming
- 4 x 50 Watts
- Aux Input
- 3 1/2" cutout; 4 1/8" O.D.
- USB Input for USB Drives
- 3 Pair of RCA Pre-outs
- Charging Through USB
- Wired/Wireless Remote-Ready
- 6-Channel Preamp Outputs
- Marine-Grade Watertight Face
UPC Code 050667372873
Infinity's Kappa 8" Marine speakers feature Plus One polypropylene woofer and midrange cones, Mylar tweeter domes (Except Subwoofer), one piece cast polymer baskets, sealed magnets, and rubber woofer surrounds for high SPL performance. Wind, water or engine noise will not drown them out, UV resistant in a marine grade IPX3 (IPX5 from front) weather resistant and include RGB LED illumination.
General Features:
- 8" 3-Way Speakers
- Power Handling: 200 watts RMS
- Power Handling: 500 watts Max
- Sensitivity: 92dB
- Frequency Response: 30-22KHz
- Impedance: 3 Ohms
- 7 color RGB LED Lights - expandable with remote
- Marine Grade IPX3 and IPX5 rated
- UV resistant
- Plus One polypropylene woofer
UPC Code
Using a Class-D power plant, this amp features a variable bass boost with KickEQ™, giving you as much as 6dB of extra bump. Powering as many as eight speakers, this amplifier makes your entire boat sound like a floating concert! A powerful 12dB crossover is also included, letting you quickly tune your system to perfection. This KM-Series amplifier delivers 90 watts into four channels, or 180 watts bridged into two channels.
General Features:
- Class D Power Supply
- 500 Watts of Dynamic Power
- Four-Channel Amplifier with Bridging Capability
- Conformal-Coated Circuit Board
- Variable 12dB Crossover
- KickEQ Variable 6dB Bass Boost
- Real Marine ABYC/NMMA-Compliant Power Connections
- 316L Stainless-Steel Hardware Included
- POWER [watts/ch], 2 OHM STEREO: 90 x 4
- POWER [watts/ch], 4 OHM BRIDGED MONO: 180 x 2
- DYNAMIC POWER [watts]: 500
- DIMS [in] all models 2-5/16H x 7-1/8W x ___L: 12-7/16
- DIMS [cm] all models 5.9H x 18.0W x ___L: 31.5
- FREQUENCY RESPONSE [Hz]: 10-20k, +0/-1dB
- High Level Sensitivity: 250mV-10V
- Low Level Sensitivity: 125mV-5V
- SIGNAL-TO-NOISE RATIO: >95dB, a-weighted, re: rated power
- ACTIVE CROSSOVER: 12dB/octave, variable 50-200Hz, selectable high pass, low pass or all pass
- KickEQ BOOST Variable 0-6dB, centered @ 40Hz
UPC Code 713034020370
This JBL Club Marine Subwoofer is ready to take on your next outdoor adventure. These fully marinized subwoofers not only deliver JBL sound, but also feature RGB lighting to bring the sound to life. Engineered to withstand sun, salt, sea spray and wash downs, they feature sealed motor structure, UV resistant one-piece cast-polymer baskets, a sealed magnet and rubber surrounds. The polypropylene cone and balanced dome tweeter provide great bass, smooth highs and lots of output to ensure every note can be heard loud and clear.
General Features:
- IPx5 Marine-Rating
- Cosmetic Appeal
- Outdoor Performance
- One-Piece Polymer Basket
- Grille-Mounted Tweeters
- Rubber Surrounds
- RGB LED Lighting
- Marine Design
- Balanced Dome Tweeters
- Designed for the Elements
- Harman Standard Reliability Testing
- Individually Voiced
- Power Handling: 250W RMS, 750W peak
- Sensitivity (@ 2.83V): 89dB
- Frequency Response: 25Hz – 500Hz
- Impedance: 4 ohms
- Bulk Packaging
LED Wiring Instructions:
Lighting is controlled manually through hardwired connection. Remove the adapter at the end of the speakers to expose the wiring. It will include a Black, Red, Green and Blue wire. When hard wiring the RGB lighting, the black lead is +12V and the Red/Green/Blue leads are ground (-) There are seven colors available through hardwired connection, select your color of choice and proceed with wiring it.
- +12V = Black
- (-) Red = Red
- (-) Green = Green
- (-) Blue = Blue
- (-) Red + Green = Lime Green
- (-) Red + Blue = Magenta
- (-) Blue + Green = Aquamarine
- (-) Red + Blue + Green = Blue/White
UPC Code 050036349925
This Kicker complete amp kit features top-quality Hyper-Flex power, ground and turn-on cables. K Series speaker wire and interconnects are also included, as is a heavy-duty AFS fuse holder and fusing. Insulated crimp connectors and zip ties come in the kit as well.
This Complete Eight Gauge Amp Kit comes complete with Full Spec wire, hardware, fusing and signal cable.
Hooking up an amp is easy when get everything you need in one place. The best hardware, signal and power cable comes in one convenient package, plus get an additional year of warranty when you buy a Kicker amp with this kit.
All kits include pure, full-spec OFC (oxygen-free copper) cabling for max power transfer, superior bass response and signal clarity.
Included in Amp Kit:
- 17 ft 8 awg blue power wire
- 4 ft 8 awg gray ground wire
- Self tapping bolt and washer
- FHS fuse holder with 60 amp fuse L=3.06", W=1.33", H=1.32"
- 17 ft 16 gauge remote wire
- 16.4 ft KI RCAs
- 12 ft Q series 12 awg speaker wire
- 6x 6" zip ties
- 8 awg firewall grommet
- 1x 18-22 awg butt connector
- 4x 12 awg fork terminals
- 2x blue fork terminal boots
- 2x black fork terminal boots
UPC Code 713034088660