JVC CW-DR124 12" 1800W Subwoofer, Digital Mono Subwoofer Amplifier, Install Kit
This JVC CW-DR124 12" subwoofer is built tough with a durable 6-layer voice coil for reliable service and a powerful and accurate sound reproduction. The subwoofer incorporates a heavy duty 61.4 oz magnet and newly developed 6-layer voice coil to deliver deep bass and outstanding durability. The newly designed graduated pleat damper helps prevent stress from affecting specific parts of the damper and minimizes mechanical damage while dramatically improving the damper's durability. This subwoofer flaunts 350W of RMS power and 1800W of peak power handling, ensuring an impressive sonic output to match all of your vehicle audio needs.
General Features:
- 12" Subwoofer
- 6-Layer Copper Voice Coil
- Newly Designed Graduated Pleat Damper
- Cone Type: PP Cone
- Surround: Foam
- Magnet: Ferrite
- Frequency Response: 38 - 300Hz
- Peak Power Handling: 1800 Watts
- RMS Power Handling: 350 Watts
- Impedance: 4 Ohms
- Sound Pressure Level: 82dB
- Net Weight: 10.58 lbs
- Mounting Depth: 6-3/16"
- Dimensions (WxHxD): 12-13/16" x 12-13/16" x 6-7/8"
UPC Code 046838077685
This JVC amplifier is the durable and powerful product you need to give your system a much needed boost. This amplifier is certified waterproof, dustproof, rustproof, and vibrationproof. A Drain Tunnel Structure is employed for creating a gap between the amplifier and the installation surface. This prevents saltwater and sand from accumulating on the bottom, increasing corrosion protection. Thicker terminal connection points and increased wire size enables maximum current flow and higher output for better low frequency response and cleaner output, resulting in powerful bass reproduction. Magnetic Shielding for the output coils reduce radiated noise, delivering smooth and accurate sound.
General Features:
- Compact Mono Digital Amplifier for Car, Marine, UTV and Motorcycle
- 600W Max Power
- 300W RMS Power @ 2 ohms
- Wired Level Control Included
- Waterproof IPX7/IPX6
- Dustproof IP6X
- Rustproof ASTM B117
- Vibrationproof
- High-Quality Capacitors
- Speaker Level Input
- LPF Frequency Control
- BassBoost Freq Switch
- Frequency Response (+0, -3dB): 20Hz - 200Hz
- Input Sensitivity (+0, -3dB): 0.2V - 5.0V
- Signal to Noise Ratio: 97dB
- Low Pass Filter Frequency (-12dB/oct.): 50Hz - 200Hz (variable)
- Bass Boost Control: 0-+18dB
- Bass Boost Frequency: 40Hz / 60Hz / 80Hz
UPC Code 046838003554
The Enrock 8-Gauge Amplifier Installation Kit makes installing your brand new sound system in your car or truck much easier. It includes all of the cables, wires, tubing, ties, grommets and ring terminals that you will need in order to get your new sound system up and running.
The car amp install kit works with a wide range of sound systems and car types and it makes the installation process much simpler by conveniently adding all your supplies to one single kit.
Kit Includes:
- 20 ft. 8 GA Red Power Cable.
- Competition High Quality Fuse Holder.
- 1/4" Ring Terminal.
- 3 ft. 8 GA Black Ground Cable #10 Ring Terminal.
- 16 ft. 18 GA Blue Turn-On Wire.
- 20 ft. High Performance RCA (TRCA) Interconnect (3) Rubber Grommets.
- 30 ft. Speaker Wire 5/16" Ring Terminal.
- 6 ft. Split Loom Tubing (20) 4" Wire Ties.
UPC Code 728120451105
