JBL R3500 Marine Bluetooth AMFM LCD Digital Media Receiver Bundle With 4x 6.5" 2-Way 300W Max Titanium RGB Marine Speakers, 4-Channel 1000W Max Marine Amplifier, Amplifier Wiring Kit

This JBL Wake Series digital media receiver comes packed with an array of features in a compact, UV-Resistant, and marine-grade design built to withstand the open-environment. Stream your favorite tunes from your smartphone using the built-in Bluetooth capability or connect to the receiver via the rear USB and AUX inputs! AM/FM Tuner is available for whenever you want to listen to the radio. The rear-mounted preamp outputs will allow you to expand your marine audio system with an amplifier if you ever want to!

General Features:

• Marine-Grade Digital Media Receiver (Not CD Capable)
• Built-in Amp: 20 watts RMS, 55 Peak x 4 Channels
• 4" Black and White LCD screen
• Built-in Bluetooth
• AM/FM Tuner
• Weather Band Tuner
• IPX7-Rated Watertight Front Panel
• UV-Resistant
• Rear AUX and USB Ports
• 2-Channel Preamp Outputs
• 2-Ohm Stable

These Infinity KAPPA 6125M 6.5" speakers will not only provide great sound but also give your system an impressive visual flair with multi-color RGB LED lighting. Pumping out 300 watts of peak power and 100 watts of RMS power, these speakers will be sure to pump out the sound you want. The durable marine-grade construction makes these speakers perfect for open-environment application!

General Features:

• 6-1/2" 2-way speakers (Pair)
• Marine-Grade
• Multi-Color RGB LED Lights
• Plus One Woofer Cone
• Grille-Mounted Mylar Tweeter
• One-Piece Cast Polymer Basket
• IPX5 Rated for Water Resistance
• Power Handling: 100 watts RMS (300 peak)
• Sensitivity: 92 dB at 2.83 volts
• Frequency Response: 40-25,000 Hz
• Impedance: 3 ohms
• Cutout diameter: 5-5/8"
• Mounting depth: 2-9/16"

DO NOT USE DRILLS ON THE SCREW SPEAKER TERMINALS EVER.

Loosen and Tighten BY HAND ONLY.  Using a Drill snaps the solder connection on the back of the terminal and the X-over (coax) Circuit board.

This new weather-resistant & high-performance JBL Marine MA704 amplifier delivers impressive power from a compact chassis designed to withstand outdoor environments. With 4-channel outputs, this JBL Marine amplifier incorporates our latest amplifier topology that includes selectable all-, high-, or low-pass crossovers with variable electronic frequency adjustment for precision system tuning. Engineered for harsh marine conditions, with power and performance to meet the needs of any outdoor audio system, this amplifier is the perfect match for all of your JBL marine products.

General Features

• Compact size
• High- and low-level inputs
• Selectable Output and Variable
• Adjustment Crossovers
• Product Value
• Cosmetic Appeal
• Conformal-Coated PCB
• Variable Crossovers
• Big Dynamic Power
• Max Power: 1000W Peak
• RMS Power Output @ 2Ω: 100W x 4, <1% THD+N
• RMS Power Output @ 4Ω: 70W x 1, <1% THD+N
• RMS Power Output @ 4Ω Bridged: 200W x 2, <1% THD+N
• Signal-to-Noise Ratio: >85dB (ref 1W output @ 4Ω)

General Features:

• Designed tor motorcycles
• 6 toot length of red and black T-Spec OFC power and ground wire with a T-Spec V8MANL fuse holder and 60 amp fuse protected by a black nylon braid
• Pre-terminated ring terminals make connections to the battery simple
• Two 4 foot pieces of 16 gauge OFC speaker wire protected by black nylon mesh makes upgrading the factory speaker wires or adding new speakers a smart choice
• Even for those upgrading the Harmon Kardon system – the ST-AK8 comes with two 47-ohm 1/2 watt resistors to keep the factory radio outputs active
• All the necessary installation hardware is included along wtth a 4 × 6 inch hook and loop mounting pad for micro-amplifiers to hold the amplifier securely in place