JBL Celebrity150 Single-DIN Bluetooth Radio, 2x 4x6" 150W Max 2-Way Speakers
JBL Celebrity 150 Headunit is Single-Din, Mechless Car Media player with Detachable face, perfect to fit JBL speaker products as a bundled audio system. Multiple playback options like Bluetooth, USB, AUX in, SD Card, and FM Radio allows you choose freely for your favorite listening source.
General specification:
- Power supply: 12 V DC on-board network
- Rated Output Power: 4 x 50W peak
- Fuse rating: 10A
- Frequency response: 20 Hz - 20 kHz
- Bluetooth Operating range: up to 10 m
- Bluetooth Supported profiles: HFP, HSP, A2DP, AVRCP
- FM Radio Frequency coverage: 87.5 - 108MHz
- Installation dimensions (W x H x D): 178 x 50 x 87mm
What’s in the Box
- JBL Celebrity 150 Headunit
- 2x ISO Wiring harness
- 2x Removal tools
- 4x Face-fixing screws
- 1x OM
- 1x Safety Sheet
Features:
- 1 Din Mechless Car Media player with Detachable face
- Multiple Playback Sources: Bluetooth, USB, AUX in, SD Card, FM Radio
- Wireless Bluetooth Streaming
- 30 Preset stations (18 FM / 12 AM)
- RCA Line Output (2 pairs; 4-volt)
- 4x50 Watts Maximum Power Output
- ISO Connector (wiring harness included)
UPC Code 050036396912
These CS Series speakers deliver remarkable performance and ultra-clean bass, utilizing a heavy-duty motor/magnet structure featuring EVC (Extended Voice Coil) technology not found in stock speakers. They use polypropylene cones with tough, ribbed, UV-treated surrounds for precise linear excursion and reliability. The CS-Series design features near-zero tweeter protrusion, so your speakers fit perfectly behind factory grilles. This simple, drop-in solution delivers acclaimed KICKER performance with a stamped-steel framework, rigid polypropylene cone and EVC (Extended Voice Coil) technology. You get superb clarity, durability and volume – now and way down the road! These CS speakers work best with 50 watts of recommended power.
General Features:
- Fits nearly every car made
- Zero-protrusion tweeters to fit nearly any factory depth
- Woofer EVC (Extended Voice Coil) tech assists with precise linear excursion
- UV-treated poly-foam surround resists heat or direct sunlight
- Large woofer magnet in a heavy-duty motor for ultra-clean bass
- PEI-tweeter construction provides superb clarity
- Neodymium tweeter magnets allow for increased volume in high frequencies
- Speaker Design: 2 - way
- Woofer Size [ in, mm ]: 4x6 [100x160]
- Tweeter Size [ in, mm ]: 1/2 [13]
- DC Resistance [ ohm ]: 3.3
- Peak Power [ watts, per ANSI/CTA-2031-A ]: 150
- Recommended Amplifier Power [ watts RMS ]: 50
- Sensitivity - SPLo [ dB @ 1W, 1m ]: 88
- Effective Frequency Range [ Hz ]: 50-20k
- Mounting Hole Diameter [ in, mm ]: 4 x 6, 101x152
- Top Mount Depth [ in, mm ]: 1 11/16, 43
- Bottom Mount Depth [ in, mm ]: 2, 50
- Tweeter Protrusion [ in, mm ]: 0
- Grilles: No
- Tweeter Magnet Material: Neodymium
- Tweeter Dome Materia: PEI [polyether imide
- Tweeter Design: Balanced dome
- Woofer Cone Material: Polypropylene
- Woofer Surround Material: Polyester foam
UPC Code 713034088349
EnrockAudio 16-Gauge Speaker Wire
This 16-gauge speaker wire with spool from EnrockBasics lets you easily connect your speakers to amplifiers or receivers.
Marked Polarity
One side of the wire is marked with a white line, making it quick and easy to distinguish the polarity and get your audio system set up properly.
Easy to Use
The EnrockAudio 16-gauge Speaker Wire comes wrapped around a hard plastic spool that makes dispensing convenient and easy.
Details
Connects audio speakers to your A/V receiver or amplifier no distortion. The plastic jacket around the speaker wire helps to deliver high-quality undistorted signals to and from all of your audio equipment.
General Features:
- 50 Feet of 16-gauge speaker wire.
- Connects audio speakers to your A/V receiver or amplifier.
UPC Code 799861390381
