JBL Celebrity150 1-DIN Bluetooth FM/SD Receiver, 2x 3.5" 80W Max 2-Way Speakers
JBL Celebrity 150 Headunit is Single-Din, Mechless Car Media player with Detachable face, perfect to fit JBL speaker products as a bundled audio system. Multiple playback options like Bluetooth, USB, AUX in, SD Card, and FM Radio allows you choose freely for your favorite listening source.
General specification:
- Power supply: 12 V DC on-board network
- Rated Output Power: 4 x 50W peak
- Fuse rating: 10A
- Frequency response: 20 Hz - 20 kHz
- Bluetooth Operating range: up to 10 m
- Bluetooth Supported profiles: HFP, HSP, A2DP, AVRCP
- FM Radio Frequency coverage: 87.5 - 108MHz
- Installation dimensions (W x H x D): 178 x 50 x 87mm
What’s in the Box
- JBL Celebrity 150 Headunit
- 2x ISO Wiring harness
- 2x Removal tools
- 4x Face-fixing screws
- 1x OM
- 1x Safety Sheet
Features:
- 1 Din Mechless Car Media player with Detachable face
- Multiple Playback Sources: Bluetooth, USB, AUX in, SD Card, FM Radio
- Wireless Bluetooth Streaming
- 30 Preset stations (18 FM / 12 AM)
- RCA Line Output (2 pairs; 4-volt)
- 4x50 Watts Maximum Power Output
- ISO Connector (wiring harness included)
UPC Code 050036396912
The Kicker DS 3-1/2-Inch Coaxial Speakers are an excellent factory upgrade. These coaxial speakers are a significant upgrade in your sound. A stamped steel framework supports a ribbed, UV-treated foam surround and rigid polypropylene cone with EVC (Extended Voice Coil) technology, for the best sonic quality. Using zero protrusion PEI tweeters ensures you get every bit of clarity you need, without interfering with factory grilles. These DS speakers work best with 20 watts of recommended power.
General Features:
- Model: DSC350
- Speaker Design: 2-Way
- Woofer [in, mm]: 3-1/2, 89
- Tweeter [in, mm]: 1/2, 13
- Rated Impedance [Ω]: 4
- Peak Power (watts, per ANSI/CTA-2031-A): 80
- Recommended Amplifier Power (watts RMS): 20
- Sensitivity [1W, 1m]: 88
- Frequency Response [Hz]: 80-20k
- Mounting Hole Diameter [in, mm]: 3,78
- Top Mount Depth [in, mm]: 1 5/8, 41
- Bottom Mount Depth [in, mm]: 1 7/8, 47
- Tweeter Protrusion [in, mm]: 1/8, 3
- No Grilles
- Tweeter Magnet Material: Neodymium
- Tweeter Dome Material: PEI (polyether imide)
- Tweeter Design: Balanced dome
- Woofer Cone Material: Polypropylene
- Woofer Surround Material: Polyester foam
UPC Code 713034077633
EnrockAudio 16-Gauge Speaker Wire
This 16-gauge speaker wire with spool from EnrockBasics lets you easily connect your speakers to amplifiers or receivers.
Marked Polarity
One side of the wire is marked with a white line, making it quick and easy to distinguish the polarity and get your audio system set up properly.
Easy to Use
The EnrockAudio 16-gauge Speaker Wire comes wrapped around a hard plastic spool that makes dispensing convenient and easy.
Details
Connects audio speakers to your A/V receiver or amplifier no distortion. The plastic jacket around the speaker wire helps to deliver high-quality undistorted signals to and from all of your audio equipment.
General Features:
- 50 Feet of 16-gauge speaker wire.
- Connects audio speakers to your A/V receiver or amplifier.
UPC Code 799861390381
