JBL 1-DIN Bluetooth SD/MP3 High Power Radio, 4x 6x8" 225W Max 2-Way Speakers
JBL Celebrity 100 Headunit is Single-Din, Mechless Car MP3 player with Detachable face, perfect to fit JBL speaker products as a bundled audio system. Multiple playback options like Bluetooth, USB input, Auxiliary input, SD Card, and FM Radio allows you choose freely for your favorite listening source.
General specification:
- Power supply: 12 V DC on-board network
- Rated Output Power: 4 x 50W peak
- Fuse rating: 10A
- Frequency response: 20 Hz - 20 kHz
- Bluetooth Operating range: up to 10 m
- Bluetooth Supported profiles: HFP, HSP, A2DP, AVRCP
- FM Radio Frequency coverage: 87.5 - 108MHz
- Installation dimensions (W x H x D): 178 x 50 x 87mm
What’s in the Box
- JBL Celebrity 100 Headunit
- 2x ISO Wiring harness
- 2x Removal tools
- 4x Face-fixing screws
- Owner’s Manual
Features:
- 1 Din Mechless Car MP3 player with Detachable face
- Multiple Playback Sources: Bluetooth, USB, AUX in, SD Card, FM Radio
- Wireless Bluetooth Streaming
- 18 Preset FM Stations
- 4 x 50 Watts Maximum Power Output
- ISO Connector (wiring harness included)
UPC Code 050036384308
These CS-Series 6x8-inch Coaxial Speakers are the perfect way to upgrade your factory system. CS-Series Coaxials deliver remarkable performance and ultra-clean bass with a heavy-duty motor/magnet structure not found in stock speakers. A stamped-steel frame supports a rigid polypropylene cone with EVC™ (Extended Voice Coil) technology for the best sonic quality. Using zero-protrusion PEI tweeters with neodymium magnets, you get the clarity you need without interfering with factory grilles. These CS speakers work best with 75 watts of recommended power.
General Features:
- Fits nearly every car made
- Zero-protrusion tweeters to fit nearly any factory depth
- Woofer EVC tech assists with precise linear excursion
- UV-treated poly-foam surround
- Resists heat or direct sunlight
- Large woofer magnet in a heavy-duty motor for ultra-clean bass
- PEI-tweeter construction provides superb clarity
- Neodymium tweeter magnets
- 2-Way Speaker Design
- .5" Balanced Dome Tweeter
- 3.5 Ohm DC Resistance
- 225W Peak Power
- 75W RMS Power
- 90dB Sensitivity
- 45-20kHz Freq Range
- 5x7-3/16" Mounting Hole Diameter
- 3/8" Top Mount Depth
- 2-3/16" Bottom Mount Depth
- Polypropylene Woofer Cone Material
- Polyester Foam Surround
UPC Code 713034088387
EnrockAudio 16-Gauge Speaker Wire
This 16-gauge speaker wire with spool from EnrockBasics lets you easily connect your speakers to amplifiers or receivers.
Marked Polarity
One side of the wire is marked with a white line, making it quick and easy to distinguish the polarity and get your audio system set up properly.
Easy to Use
The EnrockAudio 16-gauge Speaker Wire comes wrapped around a hard plastic spool that makes dispensing convenient and easy.
Details
Connects audio speakers to your A/V receiver or amplifier no distortion. The plastic jacket around the speaker wire helps to deliver high-quality undistorted signals to and from all of your audio equipment.
General Features:
- 50 Feet of 16-gauge speaker wire.
- Connects audio speakers to your A/V receiver or amplifier.
UPC Code 799861390381
