JBL Celebrity100 1-DIN FM USB/AUX SD/MP3 Receiver, 2x 4" 150W Max 2-Way Speakers
JBL Celebrity 100 Headunit is Single-Din, Mechless Car MP3 player with Detachable face, perfect to fit JBL speaker products as a bundled audio system. Multiple playback options like Bluetooth, USB input, Auxiliary input, SD Card, and FM Radio allows you choose freely for your favorite listening source.
General specification:
- Power supply: 12 V DC on-board network
- Rated Output Power: 4 x 50W peak
- Fuse rating: 10A
- Frequency response: 20 Hz - 20 kHz
- Bluetooth Operating range: up to 10 m
- Bluetooth Supported profiles: HFP, HSP, A2DP, AVRCP
- FM Radio Frequency coverage: 87.5 - 108MHz
- Installation dimensions (W x H x D): 178 x 50 x 87mm
What’s in the Box
- JBL Celebrity 100 Headunit
- 2x ISO Wiring harness
- 2x Removal tools
- 4x Face-fixing screws
- Owner’s Manual
Features:
- 1 Din Mechless Car MP3 player with Detachable face
- Multiple Playback Sources: Bluetooth, USB, AUX in, SD Card, FM Radio
- Wireless Bluetooth Streaming
- 18 Preset FM Stations
- 4 x 50 Watts Maximum Power Output
- ISO Connector (wiring harness included)
UPC Code 050036384308
The CS-Series 4-inch Coaxial Speakers deliver accuracy, durability and a factory fit! These coaxial speakers are a significant upgrade in your sound. A stamped-steel framework supports a rigid polypropylene cone with EVC (Extended Voice Coil) technology for the best sonic quality. Using zero-protrusion PEI tweeters ensures you get every bit of clarity you need, without interfering with factory grilles. These CS speakers work best with 50 watts of recommended power.
General Features:
- Fits nearly every car made
- Zero-protrusion tweeters to fit nearly any factory depth
- Woofer EVC (Extended Voice Coil) tech assists with precise linear excursion
- UV-treated poly-foam surround resists heat or direct sunlight
- Large woofer magnet in a heavy-duty motor for ultra-clean bass
- PEI-tweeter construction provides superb clarity
- Neodymium tweeter magnets allow for increased volume in high frequencies
- Steel mesh grilles included for speaker protection
- Speaker Design: 2-way
- Woofer Size [ in, mm ]: 4, 100
- Tweeter Size [ in, mm ]: 1/2, 13
- DC Resistance [ ohm ]: 3.5
- Peak Power [ watts, per ANSI/CTA-2031-A ]: 150
- Recommended Amplifier Power [ watts RMS ]: 50
- Sensitivity - SPLo [ dB @ 1W, 1m ]: 88
- Effective Frequency Range [ Hz ]: 60-20k
- Mounting Hole Diameter [ in, mm ]: 3 3/4, 95
- Top Mount Depth [ in, mm ]: 1 13/16, 46
- Bottom Mount Depth [ in, mm ]: 2 1/16, 52
- Tweeter Protrusion [ in, mm ]: 0
- Tweeter Magnet Material: Neodymium
- Tweeter Dome Materia: PEI [polyether imide]
- Tweeter Design: Balanced dome
- Woofer Cone Material: Polypropylene
- Woofer Surround Material: Polyester foam
UPC Code 713034088332
EnrockAudio 16-Gauge Speaker Wire
This 16-gauge speaker wire with spool from EnrockBasics lets you easily connect your speakers to amplifiers or receivers.
Marked Polarity
One side of the wire is marked with a white line, making it quick and easy to distinguish the polarity and get your audio system set up properly.
Easy to Use
The EnrockAudio 16-gauge Speaker Wire comes wrapped around a hard plastic spool that makes dispensing convenient and easy.
Details
Connects audio speakers to your A/V receiver or amplifier no distortion. The plastic jacket around the speaker wire helps to deliver high-quality undistorted signals to and from all of your audio equipment.
General Features:
- 50 Feet of 16-gauge speaker wire.
- Connects audio speakers to your A/V receiver or amplifier.
UPC Code 799861390381
