Kenwood Bluetooth Radio, 2x 6.5" Speakers, Amp w/ Kit, Harley Accessories
This marine/motorsports single-DIN digital media receiver comes packed with an array of features sure to boost your vehicle's infotainment system to the next level. This receiver features built-in Bluetooth and USB/AUX inputs to connect to your preferred smart devices, satellite radio readiness, and AM/FM radio. Use the remote control app to gain intuitive control over the receiver's features through your phone! The bright display offers visual customization through a variable color illumination. The conformal coating improves the durability of the circuit boards, making it reliable in open-environment applications!
General Features:
- 255 Segment 1.5 Line Text Display
- Bluetooth Direct Access Button
- Bluetooth Built-In
- Variable Color Illumination
- 13-Band EQ & DTA
- Conformal Coating
- Optional Wired Remote Control Ready
- Front USB & AUX IN
- 3 Preouts 4.0V
- AM/FM Radio Tuner
- Dual Phone Connection
- Sattelite Radio Ready
- Drive EQ
- Short Chassis
- Remote App
- Music Mix
UPC Code 019048234032
Protect your new radio from the dirt and weather found on the open road with this handy Radio Shield. The cover's frame fits in your bike's single-DIN opening, and you can then push the cover over your receiver. A unique O-ring seals the cover tightly around your receiver, so you can stop worrying about dust and water getting into the electronics.
UPC Code 810126530271
This stereo installation kit has been engineered to help you install a 2" tall (Single-DIN) aftermarket radio into the original inner fairing of a HD motorcycle, making radio replacement simple. The kit is designed to match the original look and feel of the inner fairing.
Installing an aftermarket radio can upgrade the sound quality and provide additional features the original factory radio couldn't offer but requires this kit to make it fit. To keep the audio controls on the handlebars working with the new radio, you'll need a handlebar control interface (sold separately).
General Features:
- Stereo installation kit designed to fit any standard 2" tall aftermarket single DIN radio.
- One-piece design fends off moisture and vibration.
- Designed for an original factory-like fit and finish.
- Includes brackets and hardware parts needed with detailed installation instructions.
Applications
- Single DIN radio
- HD FLH 1998-2013 (Batwing fairing) Roadglide 1998-2013 (Sharknose fairing)
UPC Code 728120484431
Complete kit for select 1996-2013 Harley Davidson (TM) Street Glide, Road Glide and Electra Glide motorcycles. Install a new radio and retain handlebar buttons and program them to control the new radio. Includes the Maestro SW module and the HD1 t-harness in one package.
General Features:
- Wiring adapter/module combo for Harley-Davidson motorcycles bikes
- Allows you to insall a new radio into 1996-2013 Harleys
- Works with a diverse variety of aftermarket radios
- Retains the use of your handlebar audio controls with radios by Alpine, Blaupunkt, Clarion, Dual,
- Eclipse, JVC, Kenwood, Pioneer, or Sony
- Assigns a secondary "press and hold" radio function to each factory button
UPC Code 627780001340
Enrock's EEA720.4 4-channel amplifier was designed compact yet rugged. The outdoors can be a tough spot for audio gear so Enrock considered the salt, spray and sunlight when designing this Class D amplifier. With 45 watts RMS per channel this amplifier will drive your speakers no matter the application you are using it for. It’s compact enough for a bike and powerful enough for a car. You’ll have no trouble hearing your tunes over the wind and waves with this powerful amplifier.
Weather Resistant for Marine Application
Durable and Powerful for Automotive Use
Compact and rugged for Off-Road Installation
This compact amplifier will fit into a storage compartment on a boat, motorcycle, ATV, or car with optimal performance, despite its size. Should you decide to add a pair of subwoofers you can bridge this amp to a 2-channel mode and send 120 watts to each subwoofer, or switch to 3-channel mode to get a pair of speakers and a subwoofer. With high-pass and low-pass filters, plus bass boost, you can customize your sound output just the way you take your tunes.
EEA720.4 GENERAL FEATURES:
- 4-channel marine/powersports/ car amplifier
- 45 watts RMS x 4 at 4 ohms (60 watts RMS x 4 at 2 ohms)
- 120 watts x 2 bridged at 4 ohms
- Class D amp technology
- 720 Watts Peak Power
- variable high- and low-pass filters
- Sealed Chassis for use in harsh environments
- Ultra-efficient full range class D operation
- Built-in Crossover- maximum flexibility
- 2 or 4 channel input
- Signal to noise ratio 97db
- High pass filter 120Hz/80Hz
- Input range: 200mV-10V
- Frequency Response: 20Hz to 20KHz
UPC Code 728120454069
The Power Sport Motorcycle Universal Amplifier Wiring Kit includes the following 6 foot length of red and black T-Spec OFC power and ground wire with a T-Spec V8MANL fuse holder, 60 amp fuse protected by a black nylon braid, Pre-terminated ring terminals, (2) 4 foot pieces of 16 gauge OFC speaker wire protected by black nylon mesh and 4"x6" hook and loop mounting pad for micro-amplifiers.
Amplifier Wiring Kit:
- Designed tor motorcycles
- 6 feet of red and black T-Spec OFC power and ground wire with a T-Spec V8MANL fuse holder and 60 amp fuse protected by a black nylon braid
- Pre-terminated ring terminals make connections to the battery simple
- Two 4 foot pieces of 16 gauge OFC speaker wire protected by black nylon mesh makes upgrading the factory speaker wires or adding new speakers a smart choice
- Upgrading Harmon Kardon System – Two 47-ohm .5 watt resistors to keep the factory radio outputs active
- All the necessary installation hardware is included along wtth a 4 × 6 inch hook and loop mounting pad for micro-amplifiers to hold the amplifier securely in place
UPC Code 086429332267
JVC's CS-DR621 6.5" 2-way speakers are the affordable solution. Built to weather the extreme temperatures of life in your car doors, these slim-profile speakers offer strong audio performance with good power handling. These speakers features lightweight yet durable carbon mica woofer cone for smooth, consistent performance, along with a 1" balanced Poly-Ether Imide tweeter that'll increase your music's clarity. These speakers will give you a solid boost in sound quality, even when powered by your factory radio. Combines High output sound and toughness to withstand the powerful drive.
General Features:
- 2-Way Coaxial Design
- 300W Peak Power Handling
- 50W RMS Power Handling
- Impedance: 4 Ohms
- Sound Pressure Level - 89 dB
- Frequency Response - 85-23,800Hz
- Carbon Mica Cone
- Wide Opening Grill
- Hybrid Surround
- Small-Design Tweeter Cover
- Balanced Poly-Ether Imide Tweeter
- Ferrite Magnet
- Neodymium Tweeter Magnet
- Poly-Ether Imide Diaphragm
UPC Code 046838079764
Enrocks EHDSA98-13 brackets will allow you to install select 6.5" or 6.75" speakers in the factory speaker openings of select 1998 - 2013 Harley Davison Bikes.
General Features:
- 6-1/2" - 6-3/4" Speaker Adapter Plate
- For 1998-2013 (FL models with fairings) Harley Davidson Touring
- Gapless fit between the speaker and the kit
- High-grade ABS plastic construction
- Color: Black
UPC Code 728120484486
The Enrock EKMR2 Marine Wire Antenna provides excellent radio reception signals to the audio system on your automobile, watercraft vehicles. The flexible wire makes it the perfect hideaway antenna, while the corrosion-resistant rubber exterior confirms that it will stand up to salt and spray. The 40inch long flexible wire will make mounting it a breeze. Knowledgeable boaters realize that even the most expensive radio will perform poorly with a second rate antenna that saves money up front. A quality antenna is the crux of reliable performance in any marine radio. From the largest seagoing ships to the smallest bass boats, Enrock antennas have held up for years under the worst marine conditions, always performing to their maximum design capabilities.
General Features:
- Weather Resistant
- 40" Braided Cable.
- Full AM/FM reception.
UPC Code 799861388647
EnrockAudio 16-Gauge Speaker Wire
This 16-gauge speaker wire with spool from EnrockBasics lets you easily connect your speakers to amplifiers or receivers.
Marked Polarity
One side of the wire is marked with a white line, making it quick and easy to distinguish the polarity and get your audio system set up properly.
Easy to Use
The EnrockAudio 16-gauge Speaker Wire comes wrapped around a hard plastic spool that makes dispensing convenient and easy.
Details
Connects audio speakers to your A/V receiver or amplifier no distortion. The plastic jacket around the speaker wire helps to deliver high-quality undistorted signals to and from all of your audio equipment.
General Features:
- 50 Feet of 16-gauge speaker wire.
- Connects audio speakers to your A/V receiver or amplifier.
UPC Code 799861390381
