JBL Marine AM/FM/WB Radio, Remote, Extension, Amp w/Kit, 4x 6.5" LED Speakers
The JAM5000N incorporates built-in Bluetooth 5.3, enabling wireless audio playback (A2DP) and control (AVRCP) from Bluetooth-enabled devices. This feature allows users to stream music, audio apps, and other content from their Bluetooth-enabled smartphones or tablets to the marine digital media receiver.
Basic playback functions, such as Play/Pause and Previous/Next Track, can be controlled directly from the front panel. Additionally, song, artist, and album information (excluding album art) is displayed on the front panel.
General Features:
- Maximum Power : 55 Watts
- RMS Power Output : 25 Watts
- Bluetooth : Yes
- Aux Input : Yes
- MP3 Playback : Yes
- WMA Playback : Yes
- Rear USB Input : 1
- Preamp Outputs : 4
- Color : Black
UPC Code 050036399449
These Infinity KAPPA 6.5" 2-Way 300W Marine Speakers features multi-color LED lighting, Plus One polypropylene woofer and midrange cones, Mylar tweeter domes, SSI (Switch Selectable Impedance) 2 or 4 Ohm option, one piece cast polymer baskets, sealed magnets, and rubber woofer surrounds for high SPL performance. UV resistant marine grade IPX3(IPX5 from front) weather resistant. (Titanium)
General Features:
- 6.5" 2-way speakers (Pair)
- Marine-Grade
- Multi-Color RGB LED Lights
- Plus One Woofer Cone
- Grille-Mounted Mylar Tweeter
- One-Piece Cast Polymer Basket
- IPX5 Rated for Water Resistance
- Power Handling: 100 watts RMS (300 peak)
- Sensitivity: 92 dB at 2.83 volts
- Frequency Response: 40-25,000 Hz
- Impedance: 3 ohms
DO NOT USE DRILLS ON THE SCREW SPEAKER TERMINALS EVER.
Loosen and Tighten BY HAND ONLY. Using a Drill snaps the solder connection on the back of the terminal and the X-over (coax) Circuit board.
UPC Code 050667373078
JBL Marine MA704 amplifier with 4-channel outputs includes selectable all high or low-pass crossovers with variable electronic frequency adjustment for precision system tuning. Engineered for harsh marine conditions with power and performance to meet the needs of any outdoor audio system. Max Power - 1000 Watts Peak
Amplifier:
- 4 Channel Marine Amplifier
- Class D Technology
- Max Power - 1000W Peak
- Power Output, 2Ω - 100W RMS x 4
- Power Output, 4Ω - 70W RMS x 4
- Power Output, 4Ω Bridged - 200W RMS x 2
- Signal-to-Noise Ratio - ≥85dB
- High and low level inputs
- Variable crossovers and bass boost
UPC Code 050036346320
This all weather wired remote provides the ability to control key source unit functions. Add localized control, with the most common area being the transom, quickly and easily! Arrives standard with 18" of cable so we suggest the REX20-6 extension for longer cabling needs. (REX20-6 is 20').
General Features:
Compatible with the following Infinity source units
- INFPRV315.2
- REFPRV415
- KAPPRV515
- KAPMBB500
Dimensions:
- 4 1/8" L x 2 1/4" W x 1/2" (thickness once installed)
- 1 1/4" hole required for installation
UPC Code 648701578017
The REX20-6 extension cable gives you more placement options when you're installing select marine receivers and remotes. It features a 6-conductor plug, and if you have a long run to deal with, you can connect two of these extension harnesses for a total length of 40'.
Extension Cable
- 20-foot extension cable
- 6-conductor plug
- For use with REM-20,21,25,30,50 and 70
UPC Code 648701212003
The Power Sport Motorcycle Universal Amplifier Wiring Kit includes the following 6 foot length of red and black T-Spec OFC power and ground wire with a T-Spec V8MANL fuse holder, 60 amp fuse protected by a black nylon braid, Pre-terminated ring terminals, (2) 4 foot pieces of 16 gauge OFC speaker wire protected by black nylon mesh and 4"x6" hook and loop mounting pad for micro-amplifiers.
Amplifier Wiring Kit:
- Designed tor motorcycles
- 6 feet of red and black T-Spec OFC power and ground wire with a T-Spec V8MANL fuse holder and 60 amp fuse protected by a black nylon braid
- Pre-terminated ring terminals make connections to the battery simple
- Two 4 foot pieces of 16 gauge OFC speaker wire protected by black nylon mesh makes upgrading the factory speaker wires or adding new speakers a smart choice
- Upgrading Harmon Kardon System – Two 47-ohm .5 watt resistors to keep the factory radio outputs active
- All the necessary installation hardware is included along wtth a 4 × 6 inch hook and loop mounting pad for micro-amplifiers to hold the amplifier securely in place
UPC Code 086429332267
