Kicker 1200W Mono Amplifier w/Kit, Dual Bass Remote,12" Dual Subwoofer Enclosure
The CXA1200.1 Mono Amplifier is built for affordable power and performance, thanks to an optimized circuit layout and the high-grade internal components.
This mono CX-Series Amp is now one-ohm stable, giving you even more wiring options for your system! Using a Class-D power plant, the CXA1200.1 features a variable bass boost with KickEQ™, giving you as much as a 6dB of extra bump with a simple turn of the optional CXARC Remote Bass Controller. A powerful 12dB crossover and 24dB subsonic filter is included, letting you quickly tune your system to perfection.
CX-Series Amplifiers accept up to 40 volts (400 watts) of speaker-level input signal. This kind of flexibility both makes line-out converters unnecessary and optimizes your sound quality at the same time!
Use the full-range outputs to expand your system with other bass amps, or add a full-range amp to complete your system.
This CX.1 Amplifier delivers as much as 1,200 watts into one bass channel.
General Features:
- Efficient Class-D amplifier
- Three-second turn-on/off delay to eliminate unwanted interference
- Variable 12dB crossovers provides control to dial in perfect sound
- KickEQ™ 6dB variable bass boost for those additional low frequencies
- 24dB subsonic filter for protection from potentially damaging frequencies
- FIT+™ (Fail-safe Integration Technology-PLUS) means it works with nearly every radio
- Accepts up to 40-volt input signal
- Small footprint for easier installation
- Compatible with CXARC Remote Bass Control
- Vertical mounting hardware included for another unique look
- Power (watts/ch) 4 Ohm: 600x1
- Power (watts/ch) 2 Ohm: 1200x1
- Power (watts/ch) 1 Ohm: 1200x1 +/-10%
- CXRC Remote Bass Capable (sold sep.): yes
- Dimensions (in, cm): (all models 2-3/8, 5.9H x 6-3/4, 17W x ...L): 12, 30.6
- Frequency Response (Hz): 25-200Hz
- Input Sensitivity: 250mV-10V (Low Level), 1V-40V (High Level)
- Signal-to-Noise Ratio: 95dB
- Active Crossover: Variable Lo-pass 50Hz–200Hz, 12dB/octave
- Subsonic Filter: 25Hz @24dB/octave
- KickEQ™ Boost: Variable 0-6dB @40Hz
UPC Code 713034012757
While controlling up to two KICKER CXARC remote-compatible amps, the DBRC uses a surface mount with magnetic mounting plate or flush mount for ultimate flexibility. Heavy-duty aluminum design with laser etching for high-end look.
General Features:
- For use with all KICKER mono amplifiers (or amps with mono channels) and powered subwoofers
- Controls one or two mono-channel amps that utilize a 3.5mm level controller input
- Compatible with KICKER PTRTP Powered Sub Enclosures, Hideaway Powered Sub Enclosures, WXA-Series Amps, KEY-Series Amps, CXA-Series Amps, PXA-Series Amps and KPX-Series Amps (not compatible with KICKER Marine Amps)
- Single knob with high-end, metal look
UPC Code 713034092117
The Kicker complete amp kit features top-quality Hyper-Flex power, ground and turn-on cables. K Series speaker wire and interconnects are also included, as is a heavy-duty AFS fuse holder and fusing. Insulated crimp connectors and zip ties come in the kit as well.
Comes complete with Full Spec wire, hardware, fusing and signal cable.
Hooking up your amplifier is easy with this complete amp kit. All kits include pure, full-spec OFC (oxygen-free copper) cabling for max power transfer, superior bass response and signal clarity.
Included In Amp Kit:
- 17 ft 4 awg blue power wire
- 4 ft 4 awg gray ground wire
- Self tapping bolt and washer
- FHS fuse holder with 100 amp fuse L=3.06", W=1.33", H=1.32"
- 17 ft 16 gauge remote wire
- 16.4 ft KI RCAs
- 12 ft Q series 12 awg speaker wire
- 6x 6" zip ties
- 4 awg firewall grommet
- 1x 18-22 awg butt connector
- 4x 12 awg fork terminals
- 2x blue fork terminal boots
- 2x black fork terminal boots
UPC Code 713034088653
Built for extreme bass, this KICKER sub box has extensive internal Built for extreme bass, this KICKER sub box has extensive internal bracing, thick MDF construction and custom embroidery. An advanced suspension and heat management system helps to keep the bass powerful, deep and consistent. The CompR’s signature red double stitching makes an outstanding bond between the improved Santoprene surround and polypropylene woofer cone. Revolutionary SoloKon technology joins the cone to the vented back brace, creating a single integrated unit that both cools the motor and eliminates distortion.
General Features:
- TYPE: Dual.
- NO. OF WOOFERS/SIZE (in, cm): (2) 12, 30
- IMPEDANCE (Ohms): 2
- Recommended Amplifier Power (watts RMS) 1000
- Peak Power (watts, per ANSI/CTA-2031-A) 2000
- SENSITIVITY (dB 1w/1m): 95.8
- Tuning Frequency [Hz] 33
- BOX TOP DEPTH (in, cm): 14, 35.6
- BOX BOTTOM DEPTH (in, cm): 17-1/4,43.8
- BOX HEIGHT (in, cm): 16, 40.6
- BOX WIDTH (in, cm): 32-3/8, 82.3
UPC Code 713034019626
